Package: libxkbfile1 Status: install ok installed Priority: optional Section: libs Installed-Size: 189 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxkbfile Version: 1:1.0.8-1 Depends: libc6 (>= 2.7), libx11-6 Pre-Depends: multiarch-support Description: X11 keyboard file manipulation library libxkbfile provides an interface to read and manipulate description files for XKB, the X11 keyboard configuration extension. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libxkbfile Package: iputils-ping Status: install ok installed Priority: important Section: net Installed-Size: 116 Maintainer: Noah Meyerhans Architecture: amd64 Source: iputils (3:20121221-5) Version: 3:20121221-5+b2 Provides: ping Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libgnutls-openssl27 (>= 3.0-0) Recommends: libcap2-bin Description: Tools to test the reachability of network hosts The ping command sends ICMP ECHO_REQUEST packets to a host in order to test if the host is reachable via the network. . This package includes a ping6 utility which supports IPv6 network connections. Package: libxi6 Status: install ok installed Priority: optional Section: libs Installed-Size: 152 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxi (2:1.7.4-1) Version: 2:1.7.4-1+b2 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6 Pre-Depends: multiarch-support Description: X11 Input extension library libXi provides an X Window System client interface to the XINPUT extension to the X protocol. . The Input extension allows setup and configuration of multiple input devices, and will soon allow hotplugging of input devices; to be added and removed on the fly. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXi Package: libedit2 Status: install ok installed Priority: standard Section: libs Installed-Size: 277 Maintainer: LLVM Packaging Team Architecture: amd64 Multi-Arch: same Source: libedit Version: 3.1-20140620-2 Depends: libbsd0 (>= 0.0), libc6 (>= 2.17), libtinfo5 Pre-Depends: multiarch-support Description: BSD editline and history libraries Command line editor library provides generic line editing, history, and tokenization functions. . It slightly resembles GNU readline. Homepage: http://www.thrysoee.dk/editline/ Package: libpam-runtime Status: install ok installed Priority: required Section: admin Installed-Size: 1447 Maintainer: Steve Langasek Architecture: all Multi-Arch: foreign Source: pam Version: 1.1.8-3.1+deb8u1 Replaces: libpam0g-dev, libpam0g-util Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6) Conflicts: libpam0g-util Conffiles: /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701 Description: Runtime support for the PAM library Contains configuration files and directories required for authentication to work on Debian systems. This package is required on almost all installations. Homepage: http://pam.sourceforge.net/ Package: vim-tiny Status: install ok installed Priority: important Section: editors Installed-Size: 1051 Maintainer: Debian Vim Maintainers Architecture: amd64 Source: vim Version: 2:7.4.488-7 Provides: editor Depends: vim-common (= 2:7.4.488-7), libacl1 (>= 2.2.51-8), libc6 (>= 2.15), libselinux1 (>= 1.32), libtinfo5 Suggests: indent Conffiles: /etc/vim/vimrc.tiny cda3c912e5fd54a07996ee29b14c58eb Description: Vi IMproved - enhanced vi editor - compact version Vim is an almost compatible version of the UNIX editor Vi. . Many new features have been added: multi level undo, syntax highlighting, command line history, on-line help, filename completion, block operations, folding, Unicode support, etc. . This package contains a minimal version of vim compiled with no GUI and a small subset of features in order to keep small the package size. This package does not depend on the vim-runtime package, but installing it you will get its additional benefits (online documentation, plugins, ...). Homepage: http://www.vim.org/ Package: libncurses5 Status: install ok installed Priority: required Section: libs Installed-Size: 306 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: ncurses (5.9+20140913-1) Version: 5.9+20140913-1+b1 Depends: libtinfo5 (= 5.9+20140913-1+b1), libc6 (>= 2.15) Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3) Recommends: libgpm2 Description: shared libraries for terminal handling The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared libraries necessary to run programs compiled with ncurses. Homepage: http://invisible-island.net/ncurses/ Package: libxaw7 Status: install ok installed Priority: optional Section: libs Installed-Size: 504 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxaw (2:1.0.12-2) Version: 2:1.0.12-2+b1 Depends: libc6 (>= 2.15), libx11-6, libxext6, libxmu6, libxpm4, libxt6 Pre-Depends: multiarch-support Description: X11 Athena Widget library libXaw7 provides the second version of Xaw, the Athena Widgets toolkit, which is largely used by legacy X applications. This version is the most common version, as version 6 is considered deprecated, and version 8, which adds Xprint support, is unsupported and not widely used. In general, use of a more modern toolkit such as GTK+ is recommended. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXaw Package: cpp Status: install ok installed Priority: optional Section: interpreters Installed-Size: 65 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: allowed Source: gcc-defaults (1.136) Version: 4:4.9.2-2 Depends: cpp-4.9 (>= 4.9.2-1~) Suggests: cpp-doc Conflicts: cpp-doc (<< 1:2.95.3) Description: GNU C preprocessor (cpp) The GNU C preprocessor is a macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. . This is a dependency package providing the default GNU C preprocessor. Package: libxcb-present0 Status: install ok installed Priority: optional Section: libs Installed-Size: 19 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.4), libxcb1 Pre-Depends: multiarch-support Description: X C Binding, present extension This package contains the library files needed to run software using libxcb-present, the present extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: libaudit1 Status: install ok installed Priority: optional Section: libs Installed-Size: 157 Maintainer: Laurent Bigonville Architecture: amd64 Multi-Arch: same Source: audit (1:2.4-1) Version: 1:2.4-1+b1 Depends: libaudit-common (>= 1:2.4-1), libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Dynamic library for security auditing The audit-libs package contains the dynamic libraries needed for applications to use the audit framework. It is used to monitor systems for security related events. Homepage: http://people.redhat.com/sgrubb/audit/ Package: readline-common Status: install ok installed Priority: important Section: utils Installed-Size: 109 Maintainer: Matthias Klose Architecture: all Multi-Arch: foreign Source: readline6 Version: 6.3-8 Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11) Depends: dpkg (>= 1.15.4) | install-info Suggests: readline-doc Conflicts: libreadline-common, libreadline5 (<< 5.0-11) Description: GNU readline and history libraries, common files The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Package: libcairo2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1424 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: cairo Version: 1.14.0-2.1 Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.3.5), libpixman-1-0 (>= 0.30.0), libpng12-0 (>= 1.2.13-4), libx11-6, libxcb-render0, libxcb-shm0, libxcb1 (>= 1.6), libxext6, libxrender1, zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Breaks: libwebkit2gtk-3.0-25 (<< 2.4.5-2~), libwebkitgtk-1.0-0 (<< 2.4.5-2~), libwebkitgtk-3.0-0 (<< 2.4.5-2~), weston (<< 1.5.0-3~) Description: Cairo 2D vector graphics library Cairo is a multi-platform library providing anti-aliased vector-based rendering for multiple target backends. Paths consist of line segments and cubic splines and can be rendered at any width with various join and cap styles. All colors may be specified with optional translucence (opacity/alpha) and combined using the extended Porter/Duff compositing algebra as found in the X Render Extension. . Cairo exports a stateful rendering API similar in spirit to the path construction, text, and painting operators of PostScript, (with the significant addition of translucence in the imaging model). When complete, the API is intended to support the complete imaging model of PDF 1.4. . This package contains the shared libraries. Homepage: http://cairographics.org/ Package: libtinfo5 Status: install ok installed Priority: required Section: libs Installed-Size: 480 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: ncurses (5.9+20140913-1) Version: 5.9+20140913-1+b1 Replaces: libncurses5 (<< 5.9-3) Depends: libc6 (>= 2.15) Pre-Depends: multiarch-support Breaks: dialog (<< 1.2-20130523) Description: shared low-level terminfo library for terminal handling The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared low-level terminfo library. Homepage: http://invisible-island.net/ncurses/ Package: libgdbm3 Status: install ok installed Priority: important Section: libs Installed-Size: 85 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: same Source: gdbm Version: 1.8.3-13.1 Depends: libc6 (>= 2.14), dpkg (>= 1.15.4) | install-info Pre-Depends: multiarch-support Description: GNU dbm database routines (runtime version) GNU dbm ('gdbm') is a library of database functions that use extendible hashing and works similarly to the standard UNIX 'dbm' functions. . The basic use of 'gdbm' is to store key/data pairs in a data file, thus providing a persistent version of the 'dictionary' Abstract Data Type ('hash' to perl programmers). Homepage: http://directory.fsf.org/project/gdbm/ Package: libfontconfig1 Status: install ok installed Priority: optional Section: libs Installed-Size: 498 Maintainer: Keith Packard Architecture: amd64 Multi-Arch: same Source: fontconfig Version: 2.11.0-6.3 Provides: libfontconfig Depends: libc6 (>= 2.14), libexpat1 (>= 2.0.1), libfreetype6 (>= 2.2.1), fontconfig-config (>= 2.11.0-6.3) Pre-Depends: multiarch-support Breaks: xpdf (<= 3.03-11) Description: generic font configuration library - runtime Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . This package contains the runtime library needed to launch applications using fontconfig. Package: manpages Status: install ok installed Priority: important Section: doc Installed-Size: 1047 Maintainer: Martin Schulze Architecture: all Version: 3.74-1 Replaces: bind, libc-bin (<< 2.19-12), libc-dev-bin (<< 2.19-12) Suggests: man-browser Description: Manual pages about using a GNU/Linux system This package contains GNU/Linux manual pages for these sections: 4 = Devices (e.g. hd, sd). 5 = File formats and protocols, syntaxes of several system files (e.g. wtmp, /etc/passwd, nfs). 7 = Conventions and standards, macro packages, etc. (e.g. nroff, ascii). . Sections 1, 6 and 8 are provided by the respective applications. This package only includes the intro man page describing the section. . The man pages describe syntaxes of several system files. Homepage: http://www.kernel.org/doc/man-pages/ Package: xserver-xorg-video-intel Status: install ok installed Priority: optional Section: x11 Installed-Size: 2562 Maintainer: Debian X Strike Force Architecture: amd64 Source: xserver-xorg-video-intel (2:2.21.15-2) Version: 2:2.21.15-2+b2 Provides: xorg-driver-video Depends: libc6 (>= 2.17), libdrm-intel1 (>= 2.4.38), libdrm2 (>= 2.4.30), libpciaccess0 (>= 0.8.0+git20071002), libpixman-1-0 (>= 0.30.0), libudev1 (>= 183), libx11-6, libx11-xcb1, libxcb-dri2-0, libxcb-util0 (>= 0.3.8), libxcb1, libxv1, libxvmc1, xorg-video-abi-18, xserver-xorg-core (>= 2:1.15.99.903) Description: X.Org X server -- Intel i8xx, i9xx display driver This package provides the driver for the Intel i8xx and i9xx family of chipsets, including i810, i815, i830, i845, i855, i865, i915, i945 and i965 series chips. . This package also provides XvMC (XVideo Motion Compensation) drivers for i810/i815 and i9xx and newer chipsets. . This package is built from the X.org xf86-video-intel driver module. Homepage: http://www.x.org/ Package: perl-base Essential: yes Status: install ok installed Priority: required Section: perl Installed-Size: 5087 Maintainer: Niko Tyni Architecture: amd64 Source: perl Version: 5.20.2-3+deb8u3 Replaces: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3) Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl5-base, perlapi-5.20.0, perlapi-5.20.1, perlapi-5.20.2 Pre-Depends: libc6 (>= 2.14), dpkg (>= 1.17.17) Suggests: perl Breaks: autoconf2.13 (<< 2.13-45), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libfile-path-perl (<< 2.09), libfile-spec-perl (<< 3.4801), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.29), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.38), libsocket-perl (<< 2.013), libxsloader-perl (<< 0.17), pdl (<< 1:2.007-4), perl (<< 5.20.0~) Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41) Description: minimal Perl system Perl is a scripting language used in many system scripts and utilities. . This package provides a Perl interpreter and the small subset of the standard run-time library required to perform basic tasks. For a full Perl installation, install "perl" (and its dependencies, "perl-modules" and "perl-doc"). Homepage: http://dev.perl.org/perl5/ Package: libudev1 Status: install ok installed Priority: important Section: libs Installed-Size: 130 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: same Source: systemd Version: 215-17+deb8u3 Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Description: libudev shared library This library provides access to udev device information. Homepage: http://www.freedesktop.org/wiki/Software/systemd Package: libxtables10 Status: install ok installed Priority: important Section: net Installed-Size: 111 Maintainer: Laurence J. Lane Architecture: amd64 Source: iptables (1.4.21-2) Version: 1.4.21-2+b1 Replaces: iptables (<< 1.4.16.3-3) Depends: libc6 (>= 2.14) Breaks: iptables (<< 1.4.16.3-3) Description: netfilter xtables library The user-space interface to the Netfilter xtables kernel framework. Homepage: http://www.netfilter.org/ Package: libxinerama1 Status: install ok installed Priority: optional Section: libs Installed-Size: 26 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxinerama (2:1.1.3-1) Version: 2:1.1.3-1+b1 Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6 Pre-Depends: multiarch-support Description: X11 Xinerama extension library libXinerama provides an X Window System client interface to the XINERAMA extension to the X protocol. . The Xinerama (also known as panoramiX) extension allows for multiple screens attached to a single display to be treated as belonging together, and to give desktop applications a better idea of the monitor layout. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXinerama Package: libxcb-dri2-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 29 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.4), libxcb1 Pre-Depends: multiarch-support Description: X C Binding, dri2 extension This package contains the library files needed to run software using libxcb-dri2, the dri2 extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: libsm6 Status: install ok installed Priority: optional Section: libs Installed-Size: 51 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libsm (2:1.2.2-1) Version: 2:1.2.2-1+b1 Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libuuid1 (>= 2.16) Pre-Depends: multiarch-support Description: X11 Session Management library This package provides the main interface to the X11 Session Management library, which allows for applications to both manage sessions, and make use of session managers to save and restore their state for later use. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libSM Package: cpio Status: install ok installed Priority: important Section: utils Installed-Size: 853 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Version: 2.11+dfsg-4.1 Replaces: cpio-mt Depends: libc6 (>= 2.17) Suggests: libarchive1 Conflicts: cpio-mt, mt-st (<< 0.6) Description: GNU cpio -- a program to manage archives of files GNU cpio is a tool for creating and extracting archives, or copying files from one place to another. It handles a number of cpio formats as well as reading and writing tar files. Homepage: http://www.gnu.org/software/cpio/ Package: keyboard-configuration Status: install ok installed Priority: optional Section: utils Installed-Size: 2477 Maintainer: Debian Install System Team Architecture: all Multi-Arch: foreign Source: console-setup Version: 1.123 Replaces: console-setup (<< 1.47), console-setup-mini (<< 1.47) Depends: liblocale-gettext-perl, initscripts Pre-Depends: debconf (>= 1.5.34) Breaks: console-setup (<< 1.71), console-setup-mini (<< 1.47) Conffiles: /etc/init.d/console-setup 0db5a9bc1f799d7ce34a971a8aa43264 /etc/init.d/keyboard-setup 6ecdd8d7eae634bc48cbc82a73c12c25 Description: system-wide keyboard preferences This package maintains the keyboard preferences in /etc/default/keyboard. Other packages can use the information provided by this package in order to configure the keyboard on the console or in X Window. Package: libpopt0 Status: install ok installed Priority: important Section: libs Installed-Size: 131 Maintainer: Paul Martin Architecture: amd64 Multi-Arch: same Source: popt Version: 1.16-10 Replaces: popt Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3) Description: lib for parsing cmdline parameters Popt was heavily influenced by the getopt() and getopt_long() functions, but it allows more powerful argument expansion. It can parse arbitrary argv[] style arrays and automatically set variables based on command line arguments. It also allows command line arguments to be aliased via configuration files and includes utility functions for parsing arbitrary strings into argv[] arrays using shell-like rules. . This package contains the runtime library and locale data. Homepage: http://rpm5.org/ Package: libxcb-dri3-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 19 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.4), libxcb1 (>= 1.9.2) Pre-Depends: multiarch-support Description: X C Binding, dri3 extension This package contains the library files needed to run software using libxcb-dri3, the dri3 extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: kmod Status: install ok installed Priority: important Section: admin Installed-Size: 274 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: foreign Version: 18-3 Replaces: module-init-tools (<< 4) Depends: libc6 (>= 2.17), libkmod2 (= 18-3), lsb-base (>= 3.0-6) Breaks: alsa-base (<= 1.0.25+3), module-init-tools (<< 4), oss-compat (= 4) Conffiles: /etc/init.d/kmod 96948a484687c865b98806684649cee8 Description: tools for managing Linux kernel modules This package contains a set of programs for loading, inserting, and removing kernel modules for Linux. It replaces module-init-tools. Package: libattr1 Status: install ok installed Priority: required Section: libs Installed-Size: 30 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: same Source: attr Version: 1:2.4.47-2 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Conflicts: attr (<< 2.0.0) Description: Extended attribute shared library Contains the runtime environment required by programs that make use of extended attributes. Homepage: http://savannah.nongnu.org/projects/attr/ Package: libk5crypto3 Status: install ok installed Priority: standard Section: libs Installed-Size: 281 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.12.1+dfsg-19+deb8u1 Depends: libc6 (>= 2.14), libkeyutils1 (>= 1.4), libkrb5support0 (>= 1.12~alpha1+dfsg) Pre-Depends: multiarch-support Suggests: krb5-doc, krb5-user Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa) Conflicts: libkrb53 Description: MIT Kerberos runtime libraries - Crypto Library Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime cryptography libraries used by applications and Kerberos clients. Homepage: http://web.mit.edu/kerberos/ Package: libss2 Status: install ok installed Priority: required Section: libs Installed-Size: 113 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: same Source: e2fsprogs Version: 1.42.12-1.1 Replaces: e2fsprogs (<< 1.34-1) Depends: libcomerr2, libc6 (>= 2.17) Pre-Depends: multiarch-support Description: command-line interface parsing library libss provides a simple command-line interface parser which will accept input from the user, parse the command into an argv argument vector, and then dispatch it to a handler function. . It was originally inspired by the Multics SubSystem library. Homepage: http://e2fsprogs.sourceforge.net Package: libxcb-glx0 Status: install ok installed Priority: optional Section: libs Installed-Size: 127 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.4), libxcb1 Pre-Depends: multiarch-support Description: X C Binding, glx extension This package contains the library files needed to run software using libxcb-glx, the glx extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: libgtk2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 6229 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: gtk+2.0 Version: 2.24.25-3 Provides: gtk2.0-binver-2.10.0 Depends: libgtk2.0-common, libatk1.0-0 (>= 1.32.0), libc6 (>= 2.14), libcairo2 (>= 1.6.4-6.1), libcups2 (>= 1.6.0), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libgdk-pixbuf2.0-0 (>= 2.22.0), libglib2.0-0 (>= 2.41.1), libpango-1.0-0 (>= 1.28.3), libpangocairo-1.0-0 (>= 1.28.3), libpangoft2-1.0-0 (>= 1.28.3), libx11-6 (>= 2:1.4.99.1), libxcomposite1 (>= 1:0.3-1), libxcursor1 (>> 1.1.2), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxi6, libxinerama1, libxrandr2 (>= 2:1.2.99.3), libxrender1, shared-mime-info Pre-Depends: multiarch-support Recommends: hicolor-icon-theme, libgtk2.0-bin Suggests: librsvg2-common, gvfs Description: GTK+ graphical user interface library GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the shared libraries. Homepage: http://www.gtk.org/ Package: nfacct Status: install ok installed Priority: extra Section: net Installed-Size: 54 Maintainer: Laurence J. Lane Architecture: amd64 Version: 1.0.1-1.1 Depends: libc6 (>= 2.7), libmnl0 (>= 1.0.3-4~), libnetfilter-acct1 Description: netfilter accounting object tool This is the command line tool to create/retrieve/delete netfilter accounting objects. . Requires Linux kernel 3.3+ nfnetlink_acct subsystem. Homepage: http://netfilter.org/projects/nfacct/ Package: libestr0 Status: install ok installed Priority: extra Section: libs Installed-Size: 50 Maintainer: Pierre Chifflier Architecture: amd64 Source: libestr Version: 0.1.9-1.1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Helper functions for handling strings (lib) The 'libestr' library implements some helper functions to handle strings and easily, escaping special characters etc. . This package contains the shared library. Homepage: http://libestr.sourceforge.net/ Package: libexpat1 Status: install ok installed Priority: optional Section: libs Installed-Size: 346 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: expat Version: 2.1.0-6+deb8u1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Conflicts: wink (<= 1.5.1060-4) Description: XML parsing C library - runtime library This package contains the runtime, shared library of expat, the C library for parsing XML. Expat is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). Homepage: http://expat.sourceforge.net Package: xserver-xorg-video-r128 Status: install ok installed Priority: optional Section: x11 Installed-Size: 245 Maintainer: Debian X Strike Force Architecture: amd64 Source: xserver-xorg-video-r128 (6.9.2-1) Version: 6.9.2-1+b2 Provides: xorg-driver-video Depends: libc6 (>= 2.14), xorg-video-abi-18, xserver-xorg-core (>= 2:1.15.99.903) Suggests: firmware-linux Description: X.Org X server -- ATI r128 display driver This driver for the X.Org X server (see xserver-xorg for a further description) provides support for the ATI Rage 'r128' series. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-r128 driver module. Package: less Status: install ok installed Priority: important Section: text Installed-Size: 253 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Version: 458-3 Depends: libc6 (>= 2.14), libtinfo5, debianutils (>= 1.8) Description: pager program similar to more This package provides "less", a file pager (that is, a memory-efficient utility for displaying text one screenful at a time). Less has many more features than the basic pager "more". As part of the GNU project, it is widely regarded as the standard pager on UNIX-derived systems. . Also provided are "lessecho", a simple utility for ensuring arguments with spaces are correctly quoted; "lesskey", a tool for modifying the standard (vi-like) keybindings; and "lesspipe", a filter for specific types of input, such as .doc or .txt.gz files. Homepage: http://www.greenwoodsoftware.com/less/ Package: liblzma5 Status: install ok installed Priority: required Section: libs Installed-Size: 309 Maintainer: Jonathan Nieder Architecture: amd64 Multi-Arch: same Source: xz-utils (5.1.1alpha+20120614-2) Version: 5.1.1alpha+20120614-2+b3 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: XZ-format compression library XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm compression format, which provides memory-hungry but powerful compression (often better than bzip2) and fast, easy decompression. . The native format of liblzma is XZ; it also supports raw (headerless) streams and the older LZMA format used by lzma. (For 7-Zip's related format, use the p7zip package instead.) Homepage: http://tukaani.org/xz/ Package: fontconfig-config Status: install ok installed Priority: optional Section: fonts Installed-Size: 425 Maintainer: Keith Packard Architecture: all Multi-Arch: foreign Source: fontconfig Version: 2.11.0-6.3 Replaces: fontconfig (<< 2.3.2-2) Depends: debconf (>= 0.5) | debconf-2.0, ucf (>= 0.29), fonts-dejavu-core | ttf-bitstream-vera | fonts-liberation | fonts-freefont Conflicts: fontconfig (<< 2.3.2-2) Conffiles: /etc/fonts/conf.d/README 42d13304ed2e9e5b60b74d6ed29b3729 /etc/fonts/fonts.conf eb95ec3d184f6007edbcf5a0c2cbf0bc Description: generic font configuration library - configuration Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . This package contains the configuration files and scripts for fontconfig. Package: libxcb-xfixes0 Status: install ok installed Priority: optional Section: libs Installed-Size: 43 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.4), libxcb1 Pre-Depends: multiarch-support Description: X C Binding, xfixes extension This package contains the library files needed to run software using libxcb-xfixes, the xfixes extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: xserver-common Status: install ok installed Priority: optional Section: x11 Installed-Size: 1874 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: xorg-server Version: 2:1.16.4-1 Replaces: xserver-xorg-core (<< 2:1.5.2) Depends: x11-common, xkb-data, x11-xkb-utils Recommends: xfonts-base, xauth Description: common files used by various X servers This package provides files necessary for all X.Org based X servers. Package: libgtk2.0-common Status: install ok installed Priority: optional Section: misc Installed-Size: 19823 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: gtk+2.0 Version: 2.24.25-3 Replaces: libgtk2.0-0 (<< 2.24.8-2) Recommends: libgtk2.0-0 Breaks: libgtk2.0-0 (<< 2.24.8-2) Conffiles: /etc/gtk-2.0/im-multipress.conf c358838e1789c1d4e6da7f525fc922cf Description: common files for the GTK+ graphical user interface library GTK+ is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK+ is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the common files which the libraries need. Homepage: http://www.gtk.org/ Package: gcc-4.8-base Status: install ok installed Priority: required Section: libs Installed-Size: 212 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-4.8 Version: 4.8.4-1 Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~) Description: GCC, the GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Homepage: http://gcc.gnu.org/ Package: libxcb-render0 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.4), libxcb1 (>= 1.8) Pre-Depends: multiarch-support Description: X C Binding, render extension This package contains the library files needed to run software using libxcb-render, the render extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: libasyncns0 Status: install ok installed Priority: optional Section: libs Installed-Size: 59 Maintainer: Tanguy Ortolo Architecture: amd64 Multi-Arch: same Source: libasyncns Version: 0.8-5 Depends: libc6 (>= 2.15) Pre-Depends: multiarch-support Description: Asynchronous name service query library libasyncns is a C library for Linux/Unix for executing name service queries asynchronously. It is an asynchronous wrapper around getaddrinfo(3), getnameinfo(3), res_query(3) and res_search(3) from libc and libresolv. Homepage: http://0pointer.de/lennart/projects/libasyncns/ Package: libhogweed2 Status: install ok installed Priority: optional Section: libs Installed-Size: 223 Maintainer: Magnus Holmgren Architecture: amd64 Multi-Arch: same Source: nettle Version: 2.7.1-5 Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.0.0), libnettle4 (= 2.7.1-5) Pre-Depends: multiarch-support Description: low level cryptographic library (public-key cryptos) Nettle is a cryptographic library that is designed to fit easily in more or less any context: In crypto toolkits for object-oriented languages (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel space. . It tries to solve a problem of providing a common set of cryptographic algorithms for higher-level applications by implementing a context-independent set of cryptographic algorithms. In that light, Nettle doesn't do any memory allocation or I/O, it simply provides the cryptographic algorithms for the application to use in any environment and in any way it needs. . This package contains the asymmetric cryptographic algorithms, which, require the GNU multiple precision arithmetic library (libgmp) for their large integer computations. Homepage: http://www.lysator.liu.se/~nisse/nettle/ Package: libpam-modules-bin Status: install ok installed Priority: required Section: admin Installed-Size: 248 Maintainer: Steve Langasek Architecture: amd64 Multi-Arch: foreign Source: pam Version: 1.1.8-3.1+deb8u1 Replaces: libpam-modules (<< 1.1.3-8) Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32) Description: Pluggable Authentication Modules for PAM - helper binaries This package contains helper binaries used by the standard set of PAM modules in the libpam-modules package. Homepage: http://pam.sourceforge.net/ Package: libxcb-util0 Status: install ok installed Priority: extra Section: libs Installed-Size: 79 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: xcb-util Version: 0.3.8-3 Depends: libc6 (>= 2.8), libxcb1 Pre-Depends: multiarch-support Description: utility libraries for X C Binding -- atom, aux and event This package contains the library files needed to run software using libxcb-util. . The xcb-util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which have traditionally been provided by Xlib. Homepage: http://xcb.freedesktop.org Package: libegl1-mesa-drivers Status: install ok installed Priority: optional Section: libs Installed-Size: 8340 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 10.3.2-1+deb8u1 Depends: libc6 (>= 2.17), libdrm-nouveau2 (>= 2.4.38), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.38), libegl1-mesa (= 10.3.2-1+deb8u1), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgbm1 (>= 7.11~1), libgcc1 (>= 1:4.7), libglapi-mesa (= 10.3.2-1+deb8u1), libllvm3.5, libopenvg1-mesa (>= 7.9~) | libopenvg1, libstdc++6 (>= 4.9), libwayland-client0 (>= 1.3.92), libwayland-server0 (>= 1.2.0), libx11-6 (>= 2:1.4.99.1), libxext6, libxfixes3, libwayland-egl1-mesa (= 10.3.2-1+deb8u1), libudev1 Pre-Depends: multiarch-support Description: free implementation of the EGL API -- hardware drivers This package contains the EGL native platform graphics interface library. EGL provides a platform-agnostic mechanism for creating rendering surfaces for use with other graphics libraries, such as OpenGL|ES and OpenVG. . This package contains the drivers required for hardware accelerated rendering of EGL-based graphics libraries, such as OpenGL|ES and OpenVG. Homepage: http://mesa3d.sourceforge.net/ Package: grep Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1272 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Version: 2.20-4.1 Provides: rgrep Depends: dpkg (>= 1.15.4) | install-info Pre-Depends: libc6 (>= 2.14), libpcre3 (>= 1:8.35) Conflicts: rgrep Description: GNU grep, egrep and fgrep 'grep' is a utility to search for text in files; it can be used from the command line or in scripts. Even if you don't want to use it, other packages on your system probably will. . The GNU family of grep utilities may be the "fastest grep in the west". GNU grep is based on a fast lazy-state deterministic matcher (about twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper search for a fixed string that eliminates impossible text from being considered by the full regexp matcher without necessarily having to look at every character. The result is typically many times faster than Unix grep or egrep. (Regular expressions containing backreferencing will run more slowly, however.) Homepage: http://www.gnu.org/software/grep/ Package: ifupdown Status: install ok installed Priority: important Section: admin Installed-Size: 122 Maintainer: Andrew Shadura Architecture: amd64 Multi-Arch: foreign Version: 0.7.53.1 Replaces: netbase (<< 5.0) Depends: iproute2 | iproute (>= 20071016-1), libc6 (>= 2.14), lsb-base (>= 4.1+Debian3), initscripts (>= 2.88dsf-25), adduser Recommends: isc-dhcp-client | dhcp-client Suggests: ppp, rdnssd, net-tools Breaks: dhcp3-client (<< 4.0), netbase (<< 5.0) Conffiles: /etc/default/networking 35cd4a2713981c9239ce4532c1bfc1c7 /etc/init.d/networking 6b377b7e2cfece0c9d1c81f40002636f /etc/init/network-interface-container.conf 4daa570594afc50940f140a7731d20d1 /etc/init/network-interface-security.conf feb6b4b52fe24c44ff1bc68addf245d6 /etc/init/network-interface.conf aae12345eba8e946579b06798b1752c1 /etc/init/networking.conf c50811e19bcd596d99b0467b40cfbb8b /etc/network/if-down.d/upstart 1a0205ddbc1446782a8d4d818e97d8a5 /etc/network/if-up.d/upstart dfbcde4fd4a3a2553930605e03e160ab Description: high level tools to configure network interfaces This package provides the tools ifup and ifdown which may be used to configure (or, respectively, deconfigure) network interfaces based on interface definitions in the file /etc/network/interfaces. Package: libjpeg62-turbo Status: install ok installed Priority: optional Section: libs Installed-Size: 341 Maintainer: Ondřej Surý Architecture: amd64 Multi-Arch: same Source: libjpeg-turbo Version: 1:1.3.1-12 Replaces: libjpeg62 Provides: libjpeg62 Depends: libc6 (>= 2.14) Conflicts: libjpeg62 Description: libjpeg-turbo JPEG runtime library The libjpeg-turbo JPEG library is a library for handling JPEG files. . libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2, NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64, and ARM systems. The libjpeg-turbo JPEG library is an API/ABI compatible with the IJG JPEG library. . This package contains the shared runtime library. Homepage: http://www.libjpeg-turbo.org/ Package: inputattach Status: install ok installed Priority: extra Section: utils Installed-Size: 38 Maintainer: Stephen Kitt Architecture: amd64 Source: joystick Version: 1:1.4.7-2 Depends: libc6 (>= 2.15) Breaks: joystick (<< 20051019-6) Description: utility to connect serial-attached peripherals to the input subsystem inputattach connects legacy serial-attached input peripherals to the input subsystem: keyboards, mice, joysticks, touch-screens... . Amongst other things this allows legacy mice to be accessed via the /dev/input/mice multiplexer. . Supported devices include: * Serial-attached keyboards including the Apple Newton keyboard, DEC LK201 / LK401 keyboards, the Stowaway keyboard, Sun type 4 and 5 keyboards, standard PS/2 keyboards with a serial adapter * Serial mice using Genius, Logitech, Microsoft or Mouse Systems protocols * Serial-attached touchscreens including those manufactured by 3M, ELO, Fujitsu, Penmount, Touchright, Touchwindow * Serial-attached joysticks including I-Force, SpaceBall, SpaceOrb, Gravis Stinger, WingMan Warrior * The Handykey Twiddler used as a joystick or a chording keyboard Homepage: https://sourceforge.net/projects/linuxconsole/ Package: libxdamage1 Status: install ok installed Priority: optional Section: libs Installed-Size: 22 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxdamage (1:1.1.4-2) Version: 1:1.1.4-2+b1 Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.4.99.1), libxfixes3 Pre-Depends: multiarch-support Description: X11 damaged region extension library libXdamage provides an X Window System client interface to the DAMAGE extension to the X protocol. . The Damage extension provides for notification of when on-screen regions have been 'damaged' (altered). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXdamage Package: libssl1.0.0 Status: install ok installed Priority: important Section: libs Installed-Size: 3065 Maintainer: Debian OpenSSL Team Architecture: amd64 Multi-Arch: same Source: openssl Version: 1.0.1k-3+deb8u2 Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0 Pre-Depends: multiarch-support Description: Secure Sockets Layer toolkit - shared libraries This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It provides the libssl and libcrypto shared libraries. Package: base-passwd Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 185 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: foreign Version: 3.5.37 Replaces: base Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145) Recommends: debconf (>= 0.5) | debconf-2.0 Description: Debian base system master password and group files These are the canonical master copies of the user database files (/etc/passwd and /etc/group), containing the Debian-allocated user and group IDs. The update-passwd tool is provided to keep the system databases synchronized with these master files. Package: libisccfg-export90 Status: install ok installed Priority: optional Section: libs Installed-Size: 78 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u4 Depends: libc6 (>= 2.4), libisc-export95 Pre-Depends: multiarch-support Description: Exported ISC CFG Shared Library The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the exported libisccfg shared library. Package: e2fslibs Status: install ok installed Priority: required Section: libs Installed-Size: 417 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: same Source: e2fsprogs Version: 1.42.12-1.1 Replaces: e2fsprogs (<< 1.34-1) Provides: libe2p2, libext2fs2 Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Description: ext2/ext3/ext4 file system libraries The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package provides the ext2fs and e2p libraries, for userspace software that directly accesses extended file systems. Programs that use libext2fs include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include dumpe2fs, chattr, and lsattr. Homepage: http://e2fsprogs.sourceforge.net Package: libxext6 Status: install ok installed Priority: optional Section: libs Installed-Size: 142 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxext Version: 2:1.3.3-1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0) Pre-Depends: multiarch-support Description: X11 miscellaneous extension library libXext provides an X Window System client interface to several extensions to the X protocol. . The supported protocol extensions are: - DOUBLE-BUFFER (DBE), the Double Buffer extension; - DPMS, the VESA Display Power Management System extension; - Extended-Visual-Information (EVI), an extension for gathering extra information about the X server's visuals; - LBX, the Low Bandwidth X extension; - MIT-SHM, the MIT X client/server shared memory extension; - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT; - Multi-Buffering, the multi-buffering and stereo display extension; - SECURITY, the X security extension; - SHAPE, the non-rectangular shaped window extension; - SYNC, the X synchronization extension; - TOG-CUP, the Open Group's Colormap Utilization extension; - XC-APPGROUP, the X Consortium's Application Group extension; - XC-MISC, the X Consortium's resource ID querying extension; - XTEST, the X test extension (this is one of two client-side implementations; the other is in the libXtst library, provided by the libxtst6 package); . libXext also provides a small set of utility functions to aid authors of client APIs for X protocol extensions. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXext Package: debianutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 147 Maintainer: Clint Adams Architecture: amd64 Multi-Arch: foreign Source: debianutils (4.4) Version: 4.4+b1 Replaces: manpages-pl (<< 1:0.5) Depends: sensible-utils Pre-Depends: libc6 (>= 2.15) Description: Miscellaneous utilities specific to Debian This package provides a number of small utilities which are used primarily by the installation scripts of Debian packages, although you may use them directly. . The specific utilities included are: add-shell installkernel ischroot remove-shell run-parts savelog tempfile which Package: libxfixes3 Status: install ok installed Priority: optional Section: libs Installed-Size: 38 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxfixes (1:5.0.1-2) Version: 1:5.0.1-2+b2 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0) Pre-Depends: multiarch-support Description: X11 miscellaneous 'fixes' extension library libXfixes provides an X Window System client interface to the 'XFIXES' extension to the X protocol. . It provides support for Region types, and some cursor functions. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXfixes Package: x11-xkb-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 471 Maintainer: Debian X Strike Force Architecture: amd64 Version: 7.7+1 Replaces: xbase-clients (<= 1:7.2.ds2-3) Depends: libc6 (>= 2.14), libx11-6, libxaw7, libxkbfile1, libxt6 Description: X11 XKB utilities xkbutils contains a number of client-side utilities for XKB, the X11 keyboard extension. . setxkbmap is a tool to query and change the current XKB map. . xkbbell generates a bell event through the keyboard. . xkbcomp is a tool to compile XKB definitions into map files the server can use. . xkbevd is an experimental tool to listen for certain XKB events and execute defined triggers when actions occur. . xkbprint is a tool to generate an image with the physical representation of the keyboard as XKB sees it. . xkbvleds shows the changing status of keyboard LEDs. . xkbwatch shows the changing status of modifiers and LEDs. Package: libevdev2 Status: install ok installed Priority: optional Section: libs Installed-Size: 107 Maintainer: Stephen Kitt Architecture: amd64 Source: libevdev Version: 1.3+dfsg-1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: wrapper library for evdev devices libevdev is a wrapper library for evdev devices. It provides functions covering the common tasks when dealing with evdev devices, thus avoiding erroneous ioctls and other errors. . This package contains the files required to run software using libevdev. Homepage: http://www.freedesktop.org/wiki/Software/libevdev/ Package: libsigc++-2.0-0c2a Status: install ok installed Priority: optional Section: libs Installed-Size: 108 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: libsigc++-2.0 Version: 2.4.0-1 Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.6) Pre-Depends: multiarch-support Description: type-safe Signal Framework for C++ - runtime This library implements a full callback system for use in widget libraries, abstract interfaces, and general programming. It provides the ability to connect an abstract callback to a class method, function, or function object, and contains adaptor classes for the connection of dissimilar callbacks. . These are the runtime files for libsigc++, needed only if you wish to run software which depends on it. Package: libgcrypt20 Status: install ok installed Priority: standard Section: libs Installed-Size: 1033 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Version: 1.6.3-2 Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14) Pre-Depends: multiarch-support Suggests: rng-tools Description: LGPL Crypto library - runtime library libgcrypt contains cryptographic functions. Many important free ciphers, hash algorithms and public key signing algorithms have been implemented: . Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED, Camellia, IDEA, Salsa, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512, Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC. Homepage: http://directory.fsf.org/project/libgcrypt/ Package: libtxc-dxtn-s2tc0 Status: install ok installed Priority: extra Section: libs Installed-Size: 260 Maintainer: Lennart Weller Architecture: amd64 Multi-Arch: same Source: s2tc Version: 0~git20131104-1.1 Provides: libtxc-dxtn0 Depends: libc6 (>= 2.3.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Pre-Depends: multiarch-support Conflicts: libtxc-dxtn0 Description: Texture compression library for Mesa S2TC is a patent-free S3TC compatible implementation and provides texture compression to Mesa. . The library is automatically loaded and adds the OpenGL extensions GL_S3_s3tc and GL_EXT_texture_compression_s3tc. Homepage: https://github.com/divVerent/s2tc Package: xinit Status: install ok installed Priority: optional Section: x11 Installed-Size: 109 Maintainer: Debian X Strike Force Architecture: amd64 Version: 1.3.4-1 Depends: libc6 (>= 2.11), libx11-6, coreutils (>= 7.4-1), x11-common, xauth Recommends: xserver-xorg | xserver, xterm | x-session-manager | x-window-manager | x-terminal-emulator Conffiles: /etc/X11/xinit/xserverrc 50faa91e980a25adcd0de32020b340bb /etc/X11/xinit/xinitrc c11ee025d7c11c6e0b7a90d76cb424d1 Description: X server initialisation tool xinit and startx are programs which facilitate starting an X server, and loading a base X session. Package: libncursesw5 Status: install ok installed Priority: important Section: libs Installed-Size: 388 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: ncurses (5.9+20140913-1) Version: 5.9+20140913-1+b1 Depends: libtinfo5 (= 5.9+20140913-1+b1), libc6 (>= 2.15) Pre-Depends: multiarch-support Recommends: libgpm2 Description: shared libraries for terminal handling (wide character support) The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the shared libraries necessary to run programs compiled with ncursesw, which includes support for wide characters. Homepage: http://invisible-island.net/ncurses/ Package: libjasper1 Status: install ok installed Priority: optional Section: libs Installed-Size: 339 Maintainer: Roland Stigge Architecture: amd64 Multi-Arch: same Source: jasper Version: 1.900.1-debian1-2.4 Replaces: libjasper-1.700-2 Depends: libc6 (>= 2.14), libjpeg62-turbo (>= 1.3.1) Pre-Depends: multiarch-support Suggests: libjasper-runtime Conflicts: libjasper-1.700-2 Description: JasPer JPEG-2000 runtime library JasPer is a collection of software (i.e., a library and application programs) for the coding and manipulation of images. This software can handle image data in a variety of formats. One such format supported by JasPer is the JPEG-2000 format defined in ISO/IEC 15444-1:2000. . This package contains the shared library. Package: bash Essential: yes Status: install ok installed Priority: required Section: shells Installed-Size: 5010 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: foreign Source: bash (4.3-11) Version: 4.3-11+b1 Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1) Depends: base-files (>= 2.1.12), debianutils (>= 2.15) Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libtinfo5 Recommends: bash-completion (>= 20060301-0) Suggests: bash-doc Conflicts: bash-completion (<< 20060301-0) Conffiles: /etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f /etc/skel/.bashrc e62ae447bdd228160f1f0b6bab8a7fd3 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b Description: GNU Bourne Again SHell Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). . Bash is ultimately intended to be a conformant implementation of the IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2). . The Programmable Completion Code, by Ian Macdonald, is now found in the bash-completion package. Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html Package: xserver-xorg-input-evdev Status: install ok installed Priority: optional Section: x11 Installed-Size: 206 Maintainer: Debian X Strike Force Architecture: amd64 Version: 1:2.9.0-2 Provides: xorg-driver-input Depends: libc6 (>= 2.7), libevdev2 (>= 0.9.1), libmtdev1 (>= 1.1.0), libudev1 (>= 183), xorg-input-abi-21, xserver-xorg-core (>= 2:1.15.99.903) Description: X.Org X server -- evdev input driver This package provides the driver for input devices using evdev, the Linux kernel's event delivery mechanism. This driver allows for multiple keyboards and mice to be treated as separate input devices. . More information about X.Org can be found at: . This package is built from the X.org xf86-input-evdev driver module. Package: isc-dhcp-common Status: install ok installed Priority: important Section: net Installed-Size: 451 Maintainer: Debian ISC DHCP maintainers Architecture: amd64 Source: isc-dhcp Version: 4.3.1-6+deb8u2 Depends: libc6 (>= 2.15), libdns-export100, libirs-export91, libisc-export95, debianutils (>= 2.8.2) Description: common files used by all of the isc-dhcp packages This package includes all of the files that are used in common by the various ISC DHCP packages, such as the dhcp-eval and dhcp-options manpages and the OMAPI command shell. Homepage: http://www.isc.org Package: dmidecode Status: install ok installed Priority: important Section: utils Installed-Size: 170 Maintainer: Jörg Frings-Fürst Architecture: amd64 Version: 2.12-3 Depends: libc6 (>= 2.4) Description: SMBIOS/DMI table decoder Dmidecode reports information about the system's hardware as described in the system BIOS according to the SMBIOS/DMI standard. . This information typically includes system manufacturer, model name, serial number, BIOS version, asset tag as well as a lot of other details of varying level of interest and reliability depending on the manufacturer. This will often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI, ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel, USB). . Beware that DMI data have proven to be too unreliable to be blindly trusted. Dmidecode does not scan the hardware, it only reports what the BIOS told it to. Homepage: http://dmidecode.nongnu.org/ Package: libjbig0 Status: install ok installed Priority: optional Section: libs Installed-Size: 101 Maintainer: Michael van der Kolff Architecture: amd64 Multi-Arch: same Source: jbigkit Version: 2.1-3.1 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Description: JBIGkit libraries JBIG-KIT provides a portable library of compression and decompression functions with a documented interface that you can include very easily into your image or document processing software. . This package contains the dynamically linked library. Homepage: http://www.cl.cam.ac.uk/~mgk25/jbigkit/ Package: libuuid1 Status: install ok installed Priority: required Section: libs Installed-Size: 89 Maintainer: Debian util-linux Maintainers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.25.2-6 Replaces: e2fsprogs (<< 1.34-1) Depends: passwd, libc6 (>= 2.4) Pre-Depends: multiarch-support Recommends: uuid-runtime Description: Universally Unique ID library The libuuid library generates and parses 128-bit universally unique ids (UUIDs). A UUID is an identifier that is unique across both space and time, with respect to the space of all UUIDs. A UUID can be used for multiple purposes, from tagging objects with an extremely short lifetime, to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. Package: libdb5.3 Status: install ok installed Priority: standard Section: libs Installed-Size: 1812 Maintainer: Debian Berkeley DB Group Architecture: amd64 Multi-Arch: same Source: db5.3 Version: 5.3.28-9 Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Description: Berkeley v5.3 Database Libraries [runtime] This is the runtime package for programs that use the v5.3 Berkeley database library. Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html Package: fonts-dejavu-core Status: install ok installed Priority: optional Section: fonts Installed-Size: 2896 Maintainer: Debian Fonts Task Force Architecture: all Multi-Arch: foreign Source: fonts-dejavu Version: 2.34-1 Replaces: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~) Breaks: ttf-dejavu (<< 2.20-1), ttf-dejavu-core (<< 2.33+svn2514-2~) Conffiles: /etc/fonts/conf.avail/20-unhint-small-dejavu-sans.conf f7df7bba810dd953dd78212900f4dcad /etc/fonts/conf.avail/57-dejavu-sans.conf 29cfe6c581fe2dbc222525ce00097002 /etc/fonts/conf.avail/58-dejavu-lgc-sans.conf b4a8f51e45aa24fdee47b3f838cc0205 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-serif.conf 0b01522fe76b4e5b8ab3d12383371348 /etc/fonts/conf.avail/57-dejavu-sans-mono.conf d3e4d007a9ac6c47243b5994f1d195e3 /etc/fonts/conf.avail/20-unhint-small-dejavu-sans-mono.conf 0cbf30e4580c5a8570da071ab12c5e4d /etc/fonts/conf.avail/58-dejavu-lgc-sans-mono.conf d2ee39274982cb4f831783cff742c8bc /etc/fonts/conf.avail/57-dejavu-serif.conf 1dca2f4ec93842e94f3919f7e0c8f7a9 /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans-mono.conf 10d6f2176d76ee9b89a19a17811257f2 /etc/fonts/conf.avail/58-dejavu-lgc-serif.conf 5f0b00e681b1f40b65dd336696ee0bbb /etc/fonts/conf.avail/20-unhint-small-dejavu-lgc-sans.conf 6488b24401e477e35aa71237054c8ada /etc/fonts/conf.avail/20-unhint-small-dejavu-serif.conf e90c678d46f49bb9d6ba469b64e80c0c Description: Vera font family derivate with additional characters DejaVu provides an expanded version of the Vera font family aiming for quality and broader Unicode coverage while retaining the original Vera style. DejaVu currently works towards conformance with the Multilingual European Standards (MES-1 and MES-2) for Unicode coverage. The DejaVu fonts provide serif, sans and monospaced variants. . This package only contains the sans, sans-bold, serif, serif-bold, mono and mono-bold variants. For additional variants, see the ttf-dejavu-extra package. . DejaVu fonts are intended for use on low-resolution devices (mainly computer screens) but can be used in printing as well. Homepage: http://dejavu-fonts.org/ Package: xbitmaps Status: install ok installed Priority: optional Section: x11 Installed-Size: 223 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Version: 1.1.1-2 Description: Base X bitmaps This package contains the base X bitmaps, which are used in many legacy X clients. Package: xserver-xorg-video-nouveau Status: install ok installed Priority: optional Section: x11 Installed-Size: 499 Maintainer: Debian X Strike Force Architecture: amd64 Version: 1:1.0.11-1 Provides: xorg-driver-video Depends: libc6 (>= 2.15), libdrm-nouveau2 (>= 2.4.38), libdrm2 (>= 2.4.25), libudev1 (>= 183), xorg-video-abi-18, xserver-xorg-core (>= 2:1.15.99.903) Recommends: libgl1-mesa-dri (>= 9.0) Description: X.Org X server -- Nouveau display driver This driver for the X.Org X server (see xserver-xorg for a further description) provides support for NVIDIA Riva, TNT, GeForce, and Quadro cards. . This package provides 2D support including EXA acceleration, Xv and RandR. 3D functionality is provided by the libgl1-mesa-dri package. . This package is built from the FreeDesktop.org xf86-video-nouveau driver. Homepage: http://nouveau.freedesktop.org/wiki/ Package: apt-utils Status: install ok installed Priority: important Section: admin Installed-Size: 950 Maintainer: APT Development Team Architecture: amd64 Source: apt Version: 1.0.9.8.2 Depends: apt, libapt-inst1.5 (>= 0.9.15.4), libapt-pkg4.12 (>= 0.9.16), libc6 (>= 2.14), libdb5.3, libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9) Description: package management related utility programs This package contains some less used commandline utilities related to package management with APT. . * apt-extracttemplates is used by debconf to prompt for configuration questions before installation. * apt-ftparchive is used to create Packages and other index files needed to publish an archive of debian packages * apt-sortpkgs is a Packages/Sources file normalizer. Package: libcap2-bin Status: install ok installed Priority: optional Section: utils Installed-Size: 110 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: foreign Source: libcap2 Version: 1:2.24-8 Replaces: libcap-bin Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10) Recommends: libpam-cap Breaks: libcap-bin Description: POSIX 1003.1e capabilities (utilities) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains additional utilities. Homepage: http://sites.google.com/site/fullycapable/ Package: debconf Status: install ok installed Priority: required Section: admin Installed-Size: 614 Maintainer: Debconf Developers Architecture: all Multi-Arch: foreign Version: 1.5.56 Replaces: debconf-tiny Provides: debconf-2.0 Pre-Depends: perl-base (>= 5.6.1-4) Recommends: apt-utils (>= 0.5.1), debconf-i18n Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13) Conffiles: /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811 Description: Debian configuration management system Debconf is a configuration management system for debian packages. Packages use Debconf to ask questions when they are installed. Package: debconf-i18n Status: install ok installed Priority: required Section: localization Installed-Size: 1091 Maintainer: Debconf Developers Architecture: all Source: debconf Version: 1.5.56 Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22) Depends: debconf (= 1.5.56), liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl Conflicts: debconf-english, debconf-utils (<< 1.3.22) Description: full internationalization support for debconf This package provides full internationalization for debconf, including translations into all available languages, support for using translated debconf templates, and support for proper display of multibyte character sets. Package: zlib1g Status: install ok installed Priority: required Section: libs Installed-Size: 179 Maintainer: Mark Brown Architecture: amd64 Multi-Arch: same Source: zlib (1:1.2.8.dfsg-2) Version: 1:1.2.8.dfsg-2+b1 Provides: libz1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12) Conflicts: zlib1 (<= 1:1.0.4-7) Description: compression library - runtime zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the shared library. Homepage: http://zlib.net/ Package: libevemu1 Status: install ok installed Priority: optional Section: libs Installed-Size: 106 Maintainer: Stephen M. Webb Architecture: amd64 Multi-Arch: same Source: evemu Version: 1.2.0-2 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Description: Linux Input Event Device Emulation Library The evemu library and tools are used to describe devices, record data, create emulation devices and replay data from kernel evdev (input event) devices. Homepage: http://www.freedesktop.org/wiki/Evemu/ Package: hostname Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 59 Maintainer: Debian Hostname Team Architecture: amd64 Version: 3.15 Replaces: nis (<< 3.17-30) Pre-Depends: libc6 (>= 2.4) Breaks: nis (<< 3.17-30) Description: utility to set/show the host name or domain name This package provides commands which can be used to display the system's DNS name, and to display or set its hostname or NIS domain name. Package: multiarch-support Status: install ok installed Priority: required Section: libs Installed-Size: 193 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Source: glibc Version: 2.19-18+deb8u2 Depends: libc6 (>= 2.3.6-2) Description: Transitional package to ensure multiarch compatibility This is a transitional package used to ensure multiarch support is present in ld.so before unpacking libraries to the multiarch directories. It can be removed once nothing on the system depends on it. Homepage: http://www.gnu.org/software/libc/libc.html Package: tzdata Status: install ok installed Priority: required Section: localization Installed-Size: 1274 Maintainer: GNU Libc Maintainers Architecture: all Multi-Arch: foreign Version: 2015g-0+deb8u1 Replaces: libc0.1, libc0.3, libc6, libc6.1 Provides: tzdata-jessie Depends: debconf (>= 0.5) | debconf-2.0 Description: time zone and daylight-saving time data This package contains data required for the implementation of standard local time for many representative locations around the globe. It is updated periodically to reflect changes made by political bodies to time zone boundaries, UTC offsets, and daylight-saving rules. Homepage: http://www.iana.org/time-zones Package: init Essential: yes Status: install ok installed Priority: required Section: metapackages Installed-Size: 29 Maintainer: pkg-systemd-maintainers Architecture: amd64 Source: init-system-helpers Version: 1.22 Pre-Depends: systemd-sysv | sysvinit-core | upstart Description: System-V-like init utilities - metapackage This package is an essential metapackage which allows you to select from three available init systems in Debian (systemd, sysvinit, upstart) while ensuring that one of these is available on the system at all times. Package: systemd-sysv Status: install ok installed Priority: important Section: admin Installed-Size: 78 Maintainer: Debian systemd Maintainers Architecture: amd64 Source: systemd Version: 215-17+deb8u3 Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart Depends: systemd (= 215-17+deb8u3) Pre-Depends: systemd Conflicts: sysvinit-core, upstart Description: system and service manager - SysV links systemd is a replacement for sysvinit. It is dependency-based and able to read the LSB init script headers in addition to parsing rcN.d links as hints. . It also provides process supervision using cgroups and the ability to not only depend on other init script being started, but also availability of a given mount point or dbus service. . This package provides the manual pages and links needed for systemd to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a link to systemd. Homepage: http://www.freedesktop.org/wiki/Software/systemd Package: mawk Status: install ok installed Priority: required Section: interpreters Installed-Size: 198 Maintainer: Steve Langasek Architecture: amd64 Multi-Arch: foreign Version: 1.3.3-17 Provides: awk Pre-Depends: libc6 (>= 2.11) Description: a pattern scanning and text processing language Mawk is an interpreter for the AWK Programming Language. The AWK language is useful for manipulation of data files, text retrieval and processing, and for prototyping and experimenting with algorithms. Mawk is a new awk meaning it implements the AWK language as defined in Aho, Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms to the POSIX 1003.2 (draft 11.3) definition of the AWK language which contains a few features not described in the AWK book, and mawk provides a small number of extensions. . Mawk is smaller and much faster than gawk. It has some compile-time limits such as NF = 32767 and sprintf buffer = 1020. Package: gzip Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 239 Maintainer: Bdale Garbee Architecture: amd64 Version: 1.6-4 Depends: dpkg (>= 1.15.4) | install-info Pre-Depends: libc6 (>= 2.17) Suggests: less Description: GNU compression utilities This package provides the standard GNU file compression utilities, which are also the default compression tools for Debian. They typically operate on files with names ending in '.gz', but can also decompress files ending in '.Z' created with 'compress'. Package: libelf1 Status: install ok installed Priority: optional Section: libs Installed-Size: 944 Maintainer: Kurt Roeckx Architecture: amd64 Multi-Arch: same Source: elfutils Version: 0.159-4.2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: library to read and write ELF files The libelf1 package provides a shared library which allows reading and writing ELF files on a high level. Third party programs depend on this package to read internals of ELF files. The programs of the elfutils package use it also to generate new ELF files. . This library is part of elfutils. Homepage: https://fedorahosted.org/elfutils/ Package: groff-base Status: install ok installed Priority: important Section: text Installed-Size: 3203 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: foreign Source: groff Version: 1.22.2-8 Replaces: groff (<< 1.20.1-6), jgroff (<< 1.17-1) Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1) Suggests: groff Breaks: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14) Conffiles: /etc/groff/man.local 99a34592e41fb1e0639cf0fc64596346 /etc/groff/mdoc.local f8c3e22fae1765942089881d9c5edeae Description: GNU troff text-formatting system (base system components) This package contains the traditional UN*X text formatting tools troff, nroff, tbl, eqn, and pic. These utilities, together with the man-db package, are essential for displaying the on-line manual pages. . groff-base is a stripped-down package containing the necessary components to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript device (groff's default). Users who want a full groff installation, with the standard set of devices, fonts, macros, and documentation, should install the groff package. Homepage: https://www.gnu.org/software/groff/ Package: liblognorm1 Status: install ok installed Priority: extra Section: libs Installed-Size: 98 Maintainer: Pierre Chifflier Architecture: amd64 Multi-Arch: same Source: liblognorm Version: 1.0.1-3 Replaces: liblognorm0 Depends: libc6 (>= 2.14), libestr0 (>= 0.1.0), libjson-c2 (>= 0.10) Pre-Depends: multiarch-support Description: Log normalizing library Liblognorm is a event and log normalization library that is capable of real-time processing. It provides the capability to normalize events to a set of standard formats. . This package contains the shared library. Homepage: http://www.liblognorm.com/ Package: libglib2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 4629 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: glib2.0 Version: 2.42.1-1 Replaces: libglib2.0-dev (<< 2.23.2-2) Depends: libc6 (>= 2.17), libffi6 (>= 3.0.4), libpcre3 (>= 8.10), libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2) Pre-Depends: multiarch-support Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs Breaks: glib-networking (<< 2.33.12), gvfs (<< 1.8), libgnome-desktop-3-2 (<< 3.4.2-2), python-gi (<< 3.7.2) Description: GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared libraries. Homepage: http://www.gtk.org/ Package: libxss1 Status: install ok installed Priority: optional Section: libs Installed-Size: 56 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxss Version: 1:1.2.2-1 Depends: libc6 (>= 2.2.5), libx11-6 (>= 2:1.4.99.1), libxext6, x11-common Pre-Depends: multiarch-support Description: X11 Screen Saver extension library libXss provides an X Window System client interface to the MIT-SCREEN-SAVER extension to the X protocol. . The Screen Saver extension allows clients behaving as screen savers to register themselves with the X server, to better integrate themselves with the running session. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libScrnSaver Package: gpgv Status: install ok installed Priority: important Section: utils Installed-Size: 449 Maintainer: Debian GnuPG-Maintainers Architecture: amd64 Multi-Arch: foreign Source: gnupg Version: 1.4.18-7 Depends: libbz2-1.0, libc6 (>= 2.14), zlib1g (>= 1:1.1.4) Suggests: gnupg Description: GNU privacy guard - signature verification tool GnuPG is GNU's tool for secure communication and data storage. . gpgv is a stripped-down version of gnupg which is only able to check signatures. It is smaller than the full-blown gnupg and uses a different (and simpler) way to check that the public keys used to make the signature are trustworthy. Homepage: http://www.gnupg.org Package: libasound2-data Status: install ok installed Priority: optional Section: libs Installed-Size: 334 Maintainer: Debian ALSA Maintainers Architecture: all Multi-Arch: foreign Source: alsa-lib Version: 1.0.28-1 Replaces: libasound2 (<< 1.0.27-4) Suggests: alsa-utils Breaks: libasound2 (<< 1.0.27-4) Description: Configuration files and profiles for ALSA drivers This package contains configuration files for ALSA drivers and UCM profiles for use with alsaucm. . ALSA is the Advanced Linux Sound Architecture. Homepage: http://www.alsa-project.org/ Package: libxshmfence1 Status: install ok installed Priority: optional Section: libs Installed-Size: 42 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxshmfence Version: 1.1-4 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Description: X shared memory fences - shared library This library provides an interface to shared-memory fences for synchronization between the X server and direct-rendering clients. . This package contains the xshmfence shared library. Package: libcap2 Status: install ok installed Priority: standard Section: libs Installed-Size: 61 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: same Version: 1:2.24-8 Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14) Pre-Depends: multiarch-support Description: POSIX 1003.1e capabilities (library) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains the shared library. Homepage: http://sites.google.com/site/fullycapable/ Package: evemu-tools Status: install ok installed Priority: optional Section: libs Installed-Size: 103 Maintainer: Stephen M. Webb Architecture: amd64 Source: evemu Version: 1.2.0-2 Depends: libevemu1 (= 1.2.0-2), libc6 (>= 2.8) Description: Linux Input Event Device Emulation Library - test tools The evemu library and tools are used to describe devices, record data, create emulation devices and replay data from kernel evdev (input event) devices. . This package provides test tools for the evemu library. Homepage: http://www.freedesktop.org/wiki/Evemu/ Package: libgdk-pixbuf2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 535 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: gdk-pixbuf Version: 2.31.1-2+deb8u4 Replaces: libgtk2.0-0 (<< 2.21.3), libgtk2.0-bin (<< 2.21.3) Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.37.6), libjasper1, libjpeg62-turbo (>= 1.3.1), libpng12-0 (>= 1.2.13-4), libtiff5 (>= 4.0.3), libx11-6, libgdk-pixbuf2.0-common (= 2.31.1-2+deb8u4) Pre-Depends: multiarch-support Breaks: libgtk2.0-0 (<< 2.21.3), libgtk2.0-bin (<< 2.21.3), librsvg2-2 (<< 2.26.3-2), libwmf0.2-7 (<< 0.2.8.4-7) Description: GDK Pixbuf library The GDK Pixbuf library provides: - Image loading and saving facilities. - Fast scaling and compositing of pixbufs. - Simple animation loading (ie. animated GIFs) Homepage: http://www.gtk.org/ Package: bsdutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 181 Maintainer: Debian util-linux Maintainers Architecture: amd64 Multi-Arch: foreign Source: util-linux (2.25.2-6) Version: 1:2.25.2-6 Pre-Depends: libc6 (>= 2.15), libsystemd0 Recommends: bsdmainutils Description: basic utilities from 4.4BSD-Lite This package contains the bare minimum of BSD utilities needed for a Debian system: logger, renice, script, scriptreplay, and wall. The remaining standard BSD utilities are provided by bsdmainutils. Package: whiptail Status: install ok installed Priority: important Section: utils Installed-Size: 54 Maintainer: Alastair McKinstry Architecture: amd64 Multi-Arch: foreign Source: newt (0.52.17-1) Version: 0.52.17-1+b1 Depends: libc6 (>= 2.14), libnewt0.52, libpopt0 (>= 1.14), libslang2 (>= 2.2.4) Conffiles: /etc/bash_completion.d/whiptail bcd454929e3a3107961ba3cb1a98c5f4 Description: Displays user-friendly dialog boxes from shell scripts Whiptail is a "dialog" replacement using newt instead of ncurses. It provides a method of displaying several different types of dialog boxes from shell scripts. This allows a developer of a script to interact with the user in a much friendlier manner. Homepage: https://fedorahosted.org/newt/ Package: libwayland-client0 Status: install ok installed Priority: optional Section: libs Installed-Size: 98 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: wayland Version: 1.6.0-2 Replaces: libwayland0 (<< 1.1.0-1) Depends: libc6 (>= 2.14), libffi6 (>= 3.0.4) Pre-Depends: multiarch-support Conflicts: libwayland0 (<< 1.1.0-1) Description: wayland compositor infrastructure - client library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the client side of the Wayland protocol. Homepage: http://wayland.freedesktop.org/ Package: dash Essential: yes Status: install ok installed Priority: required Section: shells Installed-Size: 191 Maintainer: Gerrit Pape Architecture: amd64 Source: dash (0.5.7-4) Version: 0.5.7-4+b1 Depends: debianutils (>= 2.15), dpkg (>= 1.15.0) Pre-Depends: libc6 (>= 2.14) Description: POSIX-compliant shell The Debian Almquist Shell (dash) is a POSIX-compliant shell derived from ash. . Since it executes scripts faster than bash, and has fewer library dependencies (making it more robust against software or hardware failures), it is used as the default system shell on Debian systems. Homepage: http://gondor.apana.org.au/~herbert/dash/ Package: xkb-data Status: install ok installed Priority: extra Section: x11 Installed-Size: 5578 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: xkeyboard-config Version: 2.12-1 Breaks: libx11-6 (<< 2:1.4.3) Description: X Keyboard Extension (XKB) configuration data This package contains configuration data used by the X Keyboard Extension (XKB), which allows selection of keyboard layouts when using a graphical interface. . Every X11 vendor provides its own XKB data files, so keyboard layout designers have to send their layouts to several places. The xkeyboard-config project has been launched at FreeDesktop in order to provide a central repository that could be used by all vendors. Homepage: http://www.freedesktop.org/Software/XKeyboardConfig Package: libgbm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 4344 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 10.3.2-1+deb8u1 Depends: libc6 (>= 2.17), libdrm-nouveau2 (>= 2.4.38), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.38), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc1 (>= 1:4.7), libglapi-mesa, libllvm3.5, libstdc++6 (>= 4.9), libwayland-client0 (>= 1.2.0), libwayland-server0 (>= 1.2.0), libudev1 Pre-Depends: multiarch-support Description: generic buffer management API -- runtime This package contains the GBM buffer management library. It provides a mechanism for allocating buffers for graphics rendering tied to Mesa. . GBM is intended to be used as a native platform for EGL on drm or openwfd. Homepage: http://mesa3d.sourceforge.net/ Package: liblogging-stdlog0 Status: install ok installed Priority: optional Section: libs Installed-Size: 56 Maintainer: Michael Biebl Architecture: amd64 Multi-Arch: same Source: liblogging Version: 1.0.4-1 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Description: easy to use and lightweight logging library Liblogging consists of several components with stdlog being the core component. Think of liblogging-stdlog as the next version of the syslog(3) API. It retains the simple semantics, but makes the API more sophisticated "behind the scenes" with better support for multiple threads and flexibility for different log destinations. . This package contains the shared library. Homepage: http://www.liblogging.org/ Package: joystick Status: install ok installed Priority: extra Section: utils Installed-Size: 109 Maintainer: Stephen Kitt Architecture: amd64 Version: 1:1.4.7-2 Depends: libc6 (>= 2.15), libsdl1.2debian (>= 1.2.11) Recommends: evtest, inputattach Description: set of testing and calibration tools for joysticks Some useful tools for using joysticks: ffcfstress(1) - force-feedback stress test ffmvforce(1) - force-feedback orientation test ffset(1) - force-feedback configuration tool fftest(1) - general force-feedback test jstest(1) - joystick test jscal(1) - joystick calibration tool . evtest and inputattach, which used to be part of this package, are now available separately. Homepage: https://sourceforge.net/projects/linuxconsole/ Package: gnupg Status: install ok installed Priority: important Section: utils Installed-Size: 5218 Maintainer: Debian GnuPG-Maintainers Architecture: amd64 Multi-Arch: foreign Version: 1.4.18-7 Depends: gpgv, libbz2-1.0, libc6 (>= 2.15), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4) Recommends: gnupg-curl, libldap-2.4-2 (>= 2.4.7) Suggests: gnupg-doc, libpcsclite1, parcimonie, xloadimage | imagemagick | eog Description: GNU privacy guard - a free PGP replacement GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC 4880. . GnuPG 1.4 is the standalone, non-modularized series. In contrast to the version 2 series, shipped with the gnupg2 package, it comes with no support for S/MIME and some other tools useful for desktop environments, but also with less dependencies. . The gnupg package is built without libcurl. So it does not support HKPS keyservers. Install the gnupg-curl package if you want to use the keyserver helper tools built with libcurl and supporting HKPS. Homepage: http://www.gnupg.org Package: mount Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 357 Maintainer: Debian util-linux Maintainers Architecture: amd64 Multi-Arch: foreign Source: util-linux Version: 2.25.2-6 Pre-Depends: libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.0.15), libsmartcols1 (>= 2.25) Suggests: nfs-common (>= 1:1.1.0-13) Description: Tools for mounting and manipulating filesystems This package provides the mount(8), umount(8), swapon(8), swapoff(8), and losetup(8) commands. Package: libx11-6 Status: install ok installed Priority: optional Section: libs Installed-Size: 1561 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libx11 Version: 2:1.6.2-3 Depends: libc6 (>= 2.15), libxcb1 (>= 1.2), libx11-data Pre-Depends: multiarch-support Description: X11 client-side library This package provides a client interface to the X Window System, otherwise known as 'Xlib'. It provides a complete API for the basic functions of the window system. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libX11 Package: libflac8 Status: install ok installed Priority: optional Section: libs Installed-Size: 248 Maintainer: Debian Multimedia Maintainers Architecture: amd64 Multi-Arch: same Source: flac Version: 1.3.0-3 Depends: libc6 (>= 2.14), libogg0 (>= 1.0rc3) Pre-Depends: multiarch-support Description: Free Lossless Audio Codec - runtime C library FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC is similar to MP3, but lossless. The FLAC project consists of: . * The stream format * libFLAC, which implements a reference encoder, stream decoder, and file decoder * flac, which is a command-line wrapper around libFLAC to encode and decode .flac files * Input plugins for various music players (Winamp, XMMS, and more in the works) . This package contains the runtime library libFLAC. Homepage: http://xiph.org/flac/ Package: libgl1-mesa-dri Status: install ok installed Priority: optional Section: libs Installed-Size: 13461 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 10.3.2-1+deb8u1 Replaces: libgl1-mesa-dri-experimental (<< 7.11.1), xlibmesa-dri (<< 1:7.0.0) Depends: libc6 (>= 2.17), libdrm-intel1 (>= 2.4.48), libdrm-nouveau2 (>= 2.4.38), libdrm-radeon1 (>= 2.4.31), libdrm2 (>= 2.4.38), libelf1 (>= 0.142), libexpat1 (>= 2.0.1), libgcc1 (>= 1:4.7), libllvm3.5, libstdc++6 (>= 4.9) Pre-Depends: multiarch-support Recommends: libtxc-dxtn-s2tc0 | libtxc-dxtn0 Breaks: libgl1-mesa-dri-experimental (<< 7.11.1), libgl1-mesa-glx (<< 7.10.2-4), libgl1-mesa-glx-no-multiarch, xserver-xorg-core (<< 2:1.14.3-5), xserver-xorg-core-no-multiarch Conflicts: xlibmesa-dri (<< 1:7.0.0) Conffiles: /etc/drirc 4c85301b21785034745233dd43e6036e Description: free implementation of the OpenGL API -- DRI modules This version of Mesa provides GLX and DRI capabilities: it is capable of both direct and indirect rendering. For direct rendering, it can use DRI modules from the libgl1-mesa-dri package to accelerate drawing. . This package does not include the OpenGL library itself, only the DRI modules for accelerating direct rendering. . For a complete description of Mesa, please look at the libgl1-mesa-swx11 package. Homepage: http://mesa3d.sourceforge.net/ Package: libsystemd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 213 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: same Source: systemd Version: 215-17+deb8u3 Pre-Depends: libc6 (>= 2.14), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), multiarch-support Description: systemd utility library The libsystemd0 library provides interfaces to various systemd components. Homepage: http://www.freedesktop.org/wiki/Software/systemd Package: libpsl0 Status: install ok installed Priority: optional Section: libs Installed-Size: 510 Maintainer: Tim Rühsen Architecture: amd64 Multi-Arch: same Source: libpsl Version: 0.5.1-1 Depends: libc6 (>= 2.8), libicu52 (>= 52~m1-1~) Description: Library for Public Suffix List (shared libraries) Libpsl allows checking domains against the Public Suffix List, It can be used to avoid privacy-leaking 'super-cookies', 'super domain' certificates, for domain highlighting purposes sorting domain lists by site and more. . This package contains runtime libraries. Homepage: https://github.com/rockdaboot/libpsl Package: libc6 Status: install ok installed Priority: required Section: libs Installed-Size: 10231 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: same Source: glibc Version: 2.19-18+deb8u2 Replaces: libc6-amd64 Depends: libgcc1 Suggests: glibc-doc, debconf | debconf-2.0, locales Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.19), locales-all (<< 2.19), lsb-core (<= 3.2-27), nscd (<< 2.19) Conflicts: prelink (<= 0.0.20090311-1), tzdata (<< 2007k-1), tzdata-etch Conffiles: /etc/ld.so.conf.d/x86_64-linux-gnu.conf 593ad12389ab2b6f952e7ede67b8fbbf Description: GNU C Library: Shared libraries Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. Homepage: http://www.gnu.org/software/libc/libc.html Package: netcat-traditional Status: install ok installed Priority: important Section: net Installed-Size: 157 Maintainer: Ruben Molina Architecture: amd64 Source: netcat Version: 1.10-41 Provides: netcat Depends: libc6 (>= 2.15) Description: TCP/IP swiss army knife A simple Unix utility which reads and writes data across network connections using TCP or UDP protocol. It is designed to be a reliable "back-end" tool that can be used directly or easily driven by other programs and scripts. At the same time it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities. . This is the "classic" netcat, written by *Hobbit*. It lacks many features found in netcat-openbsd. Package: libprocps3 Status: install ok installed Priority: important Section: libs Installed-Size: 132 Maintainer: Craig Small Architecture: amd64 Multi-Arch: same Source: procps Version: 2:3.3.9-9 Replaces: procps (<< 1:3.3.2-1) Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: library for accessing process information from /proc The libprocps library is a way of accessing information out of the /proc filesystem. . This package contains the shared libraries necessary to run programs compilied with libprocps. Homepage: http://gitorious.org/procps Package: libdirectfb-1.2-9 Status: install ok installed Priority: optional Section: libs Installed-Size: 2259 Maintainer: Debian DirectFB Team Architecture: amd64 Multi-Arch: same Source: directfb Version: 1.2.10.0-5.1 Depends: libc6 (>= 2.15) Pre-Depends: multiarch-support Description: direct frame buffer graphics - shared libraries DirectFB is a graphics library which was designed with embedded systems in mind. It offers maximum hardware accelerated performance at a minimum of resource usage and overhead. Homepage: http://www.directfb.org/ Package: libboost-iostreams1.55.0 Status: install ok installed Priority: important Section: libs Installed-Size: 164 Maintainer: Debian Boost Team Architecture: amd64 Multi-Arch: same Source: boost1.55 Version: 1.55.0+dfsg-3 Depends: libbz2-1.0, libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: Boost.Iostreams Library This package forms part of the Boost C++ Libraries collection. . Boost.Iostreams are a collection of concepts and a set of templates which turn models of these concepts into C++ standard library streams and stream buffers. Homepage: http://www.boost.org/libs/iostreams/ Package: xserver-xorg-input-joystick Status: install ok installed Priority: optional Section: x11 Installed-Size: 73 Maintainer: Debian X Strike Force Architecture: amd64 Source: xserver-xorg-input-joystick (1:1.6.2-1) Version: 1:1.6.2-1+b3 Provides: xorg-driver-input Depends: libc6 (>= 2.7), xorg-input-abi-21, xserver-xorg-core (>= 2:1.15.99.903) Description: X.Org X server -- joystick input driver This package provides the driver for joysticks. . More information about X.Org can be found at: . This package is built from the X.org xf86-input-joystick driver module. Package: x11-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 598 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: foreign Version: 7.7+2 Depends: libc6 (>= 2.15), libfontconfig1 (>= 2.11), libfontenc1, libfreetype6 (>= 2.2.1), libgl1-mesa-glx | libgl1, libx11-6, libx11-xcb1, libxaw7, libxcb-shape0, libxcb1 (>= 1.6), libxcomposite1 (>= 1:0.3-1), libxext6, libxft2 (>> 2.1.1), libxi6, libxinerama1, libxmu6, libxmuu1, libxrandr2 (>= 2:1.2.0), libxrender1, libxt6, libxtst6, libxv1, libxxf86dga1, libxxf86vm1 Suggests: mesa-utils Conffiles: /etc/X11/app-defaults/Editres-color 5ec5d0e8c953faaa06af647650f30ce6 /etc/X11/app-defaults/Viewres-color ff9c397a80443790a97b909050f63282 /etc/X11/app-defaults/Xmessage-color ca383db9e4e9648bda0952ad6b8a2115 /etc/X11/app-defaults/Viewres 4f77da598593ff07cda9d2d147a07772 /etc/X11/app-defaults/Xfd a8b4d28d2ad895e40cfb6fb9c69eeecd /etc/X11/app-defaults/XFontSel 183bca665ae87e3943bdb4362d21973d /etc/X11/app-defaults/Editres 4ab7f8d63e234cf35a62ef7ae959edf7 /etc/X11/app-defaults/Xmessage eed84b35dde8b18e7dcfc80e75c1da67 Description: X11 utilities An X client is a program that interfaces with an X server (almost always via the X libraries), and thus with some input and output hardware like a graphics card, monitor, keyboard, and pointing device (such as a mouse). . This package provides a miscellaneous assortment of X utilities that ship with the X Window System, including: - appres, editres, listres and viewres, which query the X resource database; - luit, a filter that can be run between an arbitrary application and a UTF-8 terminal emulator; - xdpyinfo, a display information utility for X; - xdriinfo, query configuration information of DRI drivers; - xev, an X event displayer; - xfd, a tool that displays all the glyphs in a given X font; - xfontsel, a tool for browsing and selecting X fonts; - xkill, a tool for terminating misbehaving X clients; - xlsatoms, which lists interned atoms defined on an X server; - xlsclients, which lists client applications running on an X display; - xlsfonts, a server font list displayer; - xmessage, a tool to display message or dialog boxes; - xprop, a property displayer for X; - xvinfo, an Xv extension information utility for X; - xwininfo, a window information utility for X; . The editres and viewres programs use bitmap images provided by the xbitmaps package. The luit program requires locale information from the libx11-data package. Package: libgdk-pixbuf2.0-common Status: install ok installed Priority: optional Section: libs Installed-Size: 3048 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: gdk-pixbuf Version: 2.31.1-2+deb8u4 Replaces: libgdk-pixbuf2.0-0 (<< 2.24.0-2) Breaks: libgdk-pixbuf2.0-0 (<< 2.24.0-2) Description: GDK Pixbuf library - data files This package contains the common files and translations for the GDK Pixbuf library. Homepage: http://www.gtk.org/ Package: libsdl1.2debian Status: install ok installed Priority: optional Section: libs Installed-Size: 508 Maintainer: Debian SDL packages maintainers Architecture: amd64 Multi-Arch: same Source: libsdl1.2 (1.2.15-10) Version: 1.2.15-10+b1 Replaces: libsdl1.2debian-all, libsdl1.2debian-alsa, libsdl1.2debian-esd, libsdl1.2debian-nas, libsdl1.2debian-oss, libsdl1.2debian-pulseaudio Depends: libasound2 (>= 1.0.16), libc6 (>= 2.15), libcaca0 (>= 0.99.beta17-1), libdirectfb-1.2-9, libpulse0 (>= 0.99.1), libx11-6 (>= 2:1.4.99.1), libxext6 Pre-Depends: multiarch-support Conflicts: libsdl1.2, libsdl1.2-all, libsdl1.2-esd, libsdl1.2-nas, libsdl1.2-oss, libsdl1.2debian-all, libsdl1.2debian-alsa, libsdl1.2debian-esd, libsdl1.2debian-nas, libsdl1.2debian-oss, libsdl1.2debian-pulseaudio Description: Simple DirectMedia Layer SDL is a library that allows programs portable low level access to a video framebuffer, audio output, mouse, and keyboard. . This version of SDL is compiled with X11, caca and DirectFB graphics drivers and OSS, ALSA, NAS and PulseAudio sound drivers. Homepage: http://www.libsdl.org/ Package: startpar Status: install ok installed Priority: required Section: admin Installed-Size: 95 Maintainer: Debian sysvinit maintainers Architecture: amd64 Version: 0.59-3 Replaces: sysvinit-utils (<< 2.88dsf-52) Depends: libc6 (>= 2.15) Suggests: insserv, sysv-rc Breaks: sysvinit-utils (<< 2.88dsf-52) Conffiles: /etc/init/startpar-bridge.conf 152b77b1904939b461edc251844d0008 Description: run processes in parallel and multiplex their output Used by the sysv-rc boot system executor to run init.d scripts in parallel while making sure the script output is not completely messed up. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: libharfbuzz0b Status: install ok installed Priority: optional Section: libs Installed-Size: 738 Maintainer: أحمد المحمودي (Ahmed El-Mahmoudy) Architecture: amd64 Multi-Arch: same Source: harfbuzz Version: 0.9.35-2 Replaces: libharfbuzz0, libharfbuzz0a Depends: libc6 (>= 2.14), libfreetype6 (>= 2.3.9), libglib2.0-0 (>= 2.30.0), libgraphite2-3 (>= 1.2.2) Pre-Depends: multiarch-support Conflicts: libharfbuzz0, libharfbuzz0a Description: OpenType text shaping engine (shared library) HarfBuzz is an implementation of the OpenType Layout engine (aka layout engine) and the script-specific logic (aka shaping engine). . This package contains the shared libraries. Homepage: http://www.freedesktop.org/wiki/Software/HarfBuzz Package: libdatrie1 Status: install ok installed Priority: optional Section: libs Installed-Size: 85 Maintainer: Theppitak Karoonboonyanan Architecture: amd64 Multi-Arch: same Source: libdatrie Version: 0.2.8-1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Double-array trie library This package provides shared libraries needed to run programs that use the datrie library. It is usually automatically installed. Homepage: http://linux.thai.net/projects/libthai Package: libtiff5 Status: install ok installed Priority: optional Section: libs Installed-Size: 593 Maintainer: Jay Berkenbilt Architecture: amd64 Multi-Arch: same Source: tiff Version: 4.0.3-12.3 Depends: libc6 (>= 2.14), libjbig0 (>= 2.0), libjpeg62-turbo (>= 1.3.1), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: Tag Image File Format (TIFF) library libtiff is a library providing support for the Tag Image File Format (TIFF), a widely used format for storing image data. This package includes the shared library. Homepage: http://libtiff.maptools.org Package: libirs-export91 Status: install ok installed Priority: optional Section: libs Installed-Size: 69 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u4 Depends: libc6 (>= 2.14), libdns-export100, libisc-export95, libisccfg-export90 Pre-Depends: multiarch-support Description: Exported IRS Shared Library The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the exported libirs shared library. Package: xfonts-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 390 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: foreign Version: 1:7.7+2 Depends: libc6 (>= 2.14), libfontenc1, libfreetype6 (>= 2.2.1), libxfont1 (>= 1:1.4.2), zlib1g (>= 1:1.1.4), x11-common, xfonts-encodings Description: X Window System font utility programs xfonts-utils provides a set of utility programs shipped with the X Window System that are needed for font management. . The programs in this package include: - bdftopcf, which converts BDF fonts to PCF fonts; - bdftruncate and ucs2any, tools to generate fonts with various encodings from ISO 10646-encoded fonts - mkfontdir, a program to generate fonts.dir files; - mkfontscale, a program to generate fonts.scale files; - fonttosfnt, a program to wrap bitmap fonts in a sfnt (TrueType) wrapper. Package: libpipeline1 Status: install ok installed Priority: important Section: libs Installed-Size: 63 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: same Source: libpipeline Version: 1.4.0-1 Depends: libc6 (>= 2.15) Pre-Depends: multiarch-support Description: pipeline manipulation library This is a C library for setting up and running pipelines of processes, without needing to involve shell command-line parsing which is often error-prone and insecure. Homepage: http://libpipeline.nongnu.org/ Package: libpangocairo-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 235 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: pango1.0 Version: 1.36.8-3 Replaces: libpango1.0-0 (<< 1.32.5-2) Depends: libc6 (>= 2.4), libcairo2 (>= 1.12.10), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.37.3), libpango-1.0-0 (>= 1.32.4), libpangoft2-1.0-0 (>= 1.28.1) Pre-Depends: multiarch-support Breaks: libpango1.0-0 (<< 1.32.5-2) Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Package: libpcre3 Status: install ok installed Priority: required Section: libs Installed-Size: 618 Maintainer: Mark Baker Architecture: amd64 Multi-Arch: same Source: pcre3 Version: 2:8.35-3.3+deb8u2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~) Conflicts: libpcre3-dev (<= 4.3-3) Description: Perl 5 Compatible Regular Expression Library - runtime files This is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. . This package contains the runtime libraries. Package: libthai0 Status: install ok installed Priority: optional Section: libs Installed-Size: 103 Maintainer: Theppitak Karoonboonyanan Architecture: amd64 Multi-Arch: same Source: libthai Version: 0.1.21-1 Depends: libthai-data (>= 0.1.10), libc6 (>= 2.14), libdatrie1 (>= 0.2.0) Pre-Depends: multiarch-support Enhances: libqtcore4, libqtgui4 Description: Thai language support library LibThai is a set of Thai language support routines aimed to ease developers' tasks to incorporate Thai language support in their applications. It includes important Thai-specific functions e.g. word breaking, input and output methods as well as basic character and string supports. . This package contains the shared libraries needed to run programs that use the LibThai library. Homepage: http://linux.thai.net/projects/libthai Package: libglapi-mesa Status: install ok installed Priority: optional Section: libs Installed-Size: 252 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 10.3.2-1+deb8u1 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Description: free implementation of the GL API -- shared library The Mesa GL API module is responsible for dispatching all the gl* functions. It is intended to be mainly used by both the libgles1-mesa and libgles2-mesa packages. Homepage: http://mesa3d.sourceforge.net/ Package: libdevmapper1.02.1 Status: install ok installed Priority: optional Section: libs Installed-Size: 330 Maintainer: Debian LVM Team Architecture: amd64 Multi-Arch: same Source: lvm2 (2.02.111-2.2) Version: 2:1.02.90-2.2 Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.90-2.2) Pre-Depends: multiarch-support Breaks: lvm2 (<< 2.02.66) Conflicts: libdevmapper1.02 Description: Linux Kernel Device Mapper userspace library The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. . This package contains the (user-space) shared library for accessing the device-mapper; it allows usage of the device-mapper through a clean, consistent interface (as opposed to through kernel ioctls). Homepage: http://sources.redhat.com/lvm2/ Package: cpp-4.9 Status: install ok installed Priority: optional Section: interpreters Installed-Size: 16406 Maintainer: Debian GCC Maintainers Architecture: amd64 Source: gcc-4.9 Version: 4.9.2-10 Replaces: gccgo-4.9 (<< 4.9.2-10) Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.14), libcloog-isl4 (>= 0.17), libgmp10 (>= 2:5.0.1~), libisl10 (>= 0.10), libmpc3, libmpfr4 (>= 3.1.2), zlib1g (>= 1:1.1.4) Suggests: gcc-4.9-locales (>= 4.9) Description: GNU C preprocessor A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. Homepage: http://gcc.gnu.org/ Package: libxvmc1 Status: install ok installed Priority: optional Section: libs Installed-Size: 47 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxvmc (2:1.0.8-2) Version: 2:1.0.8-2+b1 Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6, libxv1, x11-common Pre-Depends: multiarch-support Conffiles: /etc/X11/XvMCConfig 0976f2acc0790481782bab1a5c49d471 Description: X11 Video extension library libXvMC provides an X Window System client interface to the XVideo-MotionCompensation extension to the X protocol. . The XVideo-MotionCompensation extension allows for further accelerated drawing of videos. Video data may be sent at earlier stages of the decoding pipeline than raw YUV data. At the moment, driver support for XvMC is poor to non-existent. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXvMC Package: coreutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 14249 Maintainer: Michael Stone Architecture: amd64 Multi-Arch: foreign Version: 8.23-4 Replaces: mktemp, realpath, timeout Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13) Conflicts: timeout Description: GNU core utilities This package contains the basic file, shell and text manipulation utilities which are expected to exist on every operating system. . Specifically, this package includes: arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false flock fmt fold groups head hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test timeout touch tr true truncate tsort tty uname unexpand uniq unlink users vdir wc who whoami yes Homepage: http://gnu.org/software/coreutils Package: libdns-export100 Status: install ok installed Priority: optional Section: libs Installed-Size: 1254 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u4 Depends: libc6 (>= 2.4), libisc-export95 Pre-Depends: multiarch-support Description: Exported DNS Shared Library The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the exported libdns shared library. Package: xterm Status: install ok installed Priority: optional Section: x11 Installed-Size: 1709 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: foreign Version: 312-2 Provides: x-terminal-emulator Depends: xbitmaps, libc6 (>= 2.15), libfontconfig1 (>= 2.11), libice6 (>= 1:1.0.0), libtinfo5, libutempter0 (>= 1.1.5), libx11-6, libxaw7, libxft2 (>> 2.1.1), libxmu6, libxpm4, libxt6 Recommends: x11-utils Suggests: xfonts-cyrillic Conffiles: /etc/X11/app-defaults/KOI8RXTerm e904665737663827da6ff9b9651910df /etc/X11/app-defaults/KOI8RXTerm-color d2d26270262950b81921694506281cfe /etc/X11/app-defaults/UXTerm 3ee3b2958ca3aadba1d7f1f5e419951b /etc/X11/app-defaults/UXTerm-color 446ecb44b3bec790d5c7ac8582ef6ca5 /etc/X11/app-defaults/XTerm 56c3bc0cefd8d8dbf8fb586e35b3c4a2 /etc/X11/app-defaults/XTerm-color 0ceac6d8b2f3e33be29edddb64394d96 Description: X terminal emulator xterm is a terminal emulator for the X Window System. It provides DEC VT102 and Tektronix 4014 compatible terminals for programs that cannot use the window system directly. This version implements ISO/ANSI colors and most of the control sequences used by DEC VT220 terminals. . This package provides four commands: xterm, which is the traditional terminal emulator; uxterm, which is a wrapper around xterm that is intelligent about locale settings (especially those which use the UTF-8 character encoding), but which requires the luit program from the x11-utils package; koi8rxterm, a wrapper similar to uxterm for locales that use the KOI8-R character set; and lxterm, a simple wrapper that chooses which of the previous commands to execute based on the user's locale settings. . A complete list of control sequences supported by the X terminal emulator is provided in /usr/share/doc/xterm. . The xterm program uses bitmap images provided by the xbitmaps package. . Those interested in using koi8rxterm will likely want to install the xfonts-cyrillic package as well. Homepage: http://invisible-island.net/xterm/xterm.html Package: iproute2 Status: install ok installed Priority: important Section: net Installed-Size: 1093 Maintainer: Debian iproute2 Maintainers Architecture: amd64 Multi-Arch: foreign Version: 3.16.0-2 Replaces: iproute Provides: arpd Depends: libc6 (>= 2.14), libdb5.3, libselinux1 (>= 2.0.15) Recommends: libatm1 (>= 2.4.1-17~), libxtables10 Suggests: iproute2-doc Conflicts: arpd, iproute (<< 20130000-1) Conffiles: /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f /etc/iproute2/rt_protos 95ce0b4b5b79f5a8a45941fb418a904c /etc/iproute2/rt_dsfield 4264d5c7c8298300185aa04e1a736934 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61 Description: networking and traffic control tools The iproute2 suite is a collection of utilities for networking and traffic control. . These tools communicate with the Linux kernel via the (rt)netlink interface, providing advanced features not available through the legacy net-tools commands 'ifconfig' and 'route'. Homepage: http://www.linux-foundation.org/en/Net:Iproute2 Package: tcpd Status: install ok installed Priority: optional Section: net Installed-Size: 79 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: foreign Source: tcp-wrappers Version: 7.6.q-25 Replaces: libwrap0 (<< 7.6-8) Depends: libc6 (>= 2.4), libwrap0 (>= 7.6-4~) Description: Wietse Venema's TCP wrapper utilities Wietse Venema's network logger, also known as TCPD or LOG_TCP. . These programs log the client host name of incoming telnet, ftp, rsh, rlogin, finger etc. requests. . Security options are: - access control per host, domain and/or service; - detection of host name spoofing or host address spoofing; - booby traps to implement an early-warning system. Package: libbsd0 Status: install ok installed Priority: optional Section: libs Installed-Size: 121 Maintainer: Guillem Jover Architecture: amd64 Multi-Arch: same Source: libbsd Version: 0.7.0-2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: utility functions from BSD systems - shared library This library provides some C functions such as strlcpy() that are commonly available on BSD systems but not on others like GNU systems. . For a detailed list of the provided functions, please see the libbsd-dev package description. Homepage: http://libbsd.freedesktop.org/ Package: e2fsprogs Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 2957 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: foreign Version: 1.42.12-1.1 Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2) Pre-Depends: e2fslibs (= 1.42.12-1.1), libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1) Suggests: gpart, parted, e2fsck-static Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4) Conffiles: /etc/mke2fs.conf e2cdbf0620e93949af5857eb4739f949 Description: ext2/ext3/ext4 file system utilities The ext2, ext3 and ext4 file systems are successors of the original ext ("extended") file system. They are the main file system types used for hard disks on Debian and other Linux systems. . This package contains programs for creating, checking, and maintaining ext2/3/4-based file systems. It also includes the "badblocks" program, which can be used to scan for bad blocks on a disk or other storage device. Homepage: http://e2fsprogs.sourceforge.net Package: libpng12-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 267 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: same Source: libpng Version: 1.2.50-2+deb8u2 Replaces: libpng12-dev (<= 1.2.8rel-7) Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Conflicts: libpng12-dev (<= 1.2.8rel-7), mzscheme (<= 1:209-5), pngcrush (<= 1.5.10-2), pngmeta (<= 1.11-3), povray-3.5 (<= 3.5.0c-10), qemacs (<= 0.3.1-5) Description: PNG library - runtime libpng is a library implementing an interface for reading and writing PNG (Portable Network Graphics) format files. . This package contains the runtime library files needed to run software using libpng. Homepage: http://libpng.org/pub/png/libpng.html Package: tar Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 2619 Maintainer: Bdale Garbee Architecture: amd64 Multi-Arch: foreign Source: tar (1.27.1-2) Version: 1.27.1-2+b1 Replaces: cpio (<< 2.4.2-39) Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32) Suggests: bzip2, ncompress, xz-utils, tar-scripts Breaks: dpkg-dev (<< 1.14.26) Conflicts: cpio (<= 2.4.2-38) Conffiles: /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7 Description: GNU version of the tar archiving utility Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like PKZIP in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. Package: libkrb5support0 Status: install ok installed Priority: standard Section: libs Installed-Size: 136 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.12.1+dfsg-19+deb8u1 Depends: libc6 (>= 2.14), libkeyutils1 (>= 1.4) Pre-Depends: multiarch-support Breaks: libgssapi-krb5-2 (<< 1.12.1+dfsg-8), libk5crypto3 (<< 1.12.1+dfsg-8), libkadm5clnt-mit9 (<< 1.12.1+dfsg-8), libkadm5srv-mit9 (<< 1.12.1+dfsg-8), libkdb5-7 (<< 1.12.1+dfsg-8) Conflicts: libkrb53 Description: MIT Kerberos runtime libraries - Support library Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains an internal runtime support library used by other Kerberos libraries. Homepage: http://web.mit.edu/kerberos/ Package: xserver-xorg-core Status: install ok installed Priority: optional Section: x11 Installed-Size: 5634 Maintainer: Debian X Strike Force Architecture: amd64 Source: xorg-server Version: 2:1.16.4-1 Provides: xorg-input-abi-21, xorg-video-abi-18 Depends: xserver-common (>= 2:1.16.4-1), keyboard-configuration, udev (>= 149), libegl1-mesa | libegl1, libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libdrm2 (>= 2.3.1), libepoxy0 (>= 1.0), libgbm1 (>= 8.1~0), libgcrypt20 (>= 1.6.1), libgl1-mesa-glx | libgl1, libpciaccess0 (>= 0.12.902), libpixman-1-0 (>= 0.30.0), libselinux1 (>= 2.0.82), libudev1 (>= 183), libxau6, libxdmcp6, libxfont1 (>= 1:1.4.2), libxshmfence1 Recommends: libgl1-mesa-dri (>= 7.10.2-4) Suggests: xfonts-100dpi | xfonts-75dpi, xfonts-scalable Breaks: libgl1-mesa-dri (<< 7.10.2-4), libgl1-mesa-dri-experimental (<< 7.10.2-4), xserver-xorg-input, xserver-xorg-input-2, xserver-xorg-input-2.1, xserver-xorg-input-4, xserver-xorg-input-7, xserver-xorg-input-joystick (<= 1:1.5.0-3), xserver-xorg-input-synaptics (<= 1.2.2-1), xserver-xorg-input-tslib (<= 0.0.6-3), xserver-xorg-input-vmmouse (<= 1:12.6.5-4), xserver-xorg-input-wacom (<= 0.10.5+20100415-1), xserver-xorg-video, xserver-xorg-video-1.0, xserver-xorg-video-1.9, xserver-xorg-video-2, xserver-xorg-video-4, xserver-xorg-video-5, xserver-xorg-video-6, xserver-xorg-video-cyrix (<= 1:1.1.0-8), xserver-xorg-video-i810 (<< 2:2.4), xserver-xorg-video-imstt (<= 1:1.1.0-7), xserver-xorg-video-nsc (<= 1:2.8.3-4), xserver-xorg-video-sunbw2 (<= 1:1.1.0-5), xserver-xorg-video-v4l (<< 1:0.2.0), xserver-xorg-video-vga (<= 1:4.1.0-8) Conflicts: xserver-xorg-input-evtouch Description: Xorg X server - core server The Xorg X server is an X server for several architectures and operating systems, which is derived from the XFree86 4.x series of X servers. . The Xorg server supports most modern graphics hardware from most vendors, and supersedes all XFree86 X servers. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Package: libbz2-1.0 Status: install ok installed Priority: important Section: libs Installed-Size: 114 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: same Source: bzip2 (1.0.6-7) Version: 1.0.6-7+b3 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Description: high-quality block-sorting file compressor library - runtime This package contains libbzip2 which is used by the bzip2 compressor. . bzip2 is a freely available, patent free, high-quality data compressor. It typically compresses files to within 10% to 15% of the best available techniques, whilst being around twice as fast at compression and six times faster at decompression. . bzip2 compresses files using the Burrows-Wheeler block-sorting text compression algorithm, and Huffman coding. Compression is generally considerably better than that achieved by more conventional LZ77/LZ78-based compressors, and approaches the performance of the PPM family of statistical compressors. . The archive file format of bzip2 (.bz2) is incompatible with that of its predecessor, bzip (.bz). Homepage: http://www.bzip.org/ Package: ucf Status: install ok installed Priority: standard Section: utils Installed-Size: 229 Maintainer: Manoj Srivastava Architecture: all Multi-Arch: foreign Version: 3.0030 Depends: debconf (>= 1.5.19), coreutils (>= 5.91) Conffiles: /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e Description: Update Configuration File(s): preserve user changes to config files Debian policy mandates that user changes to configuration files must be preserved during package upgrades. The easy way to achieve this behavior is to make the configuration file a 'conffile', in which case dpkg handles the file specially during upgrades, prompting the user as needed. . This is appropriate only if it is possible to distribute a default version that will work for most installations, although some system administrators may choose to modify it. This implies that the default version will be part of the package distribution, and must not be modified by the maintainer scripts during installation (or at any other time). . This script attempts to provide conffile-like handling for files that may not be labelled conffiles, and are not shipped in a Debian package, but handled by the postinst instead. This script allows one to maintain files in /etc, preserving user changes and in general offering the same facilities while upgrading that dpkg normally provides for 'conffiles'. . Additionally, this script provides facilities for transitioning a file that had not been provided with conffile-like protection to come under this schema, and attempts to minimize questions asked at installation time. Indeed, the transitioning facility is better than the one offered by dpkg while transitioning a file from a non-conffile to conffile status. Package: xfonts-encodings Status: install ok installed Priority: optional Section: x11 Installed-Size: 668 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Version: 1:1.0.4-2 Replaces: xfonts-base (<< 1:1.0.0) Depends: x11-common Description: Encodings for X.Org fonts This package contains the encodings that map to specific characters. Package: libkmod2 Status: install ok installed Priority: important Section: libs Installed-Size: 134 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: same Source: kmod Version: 18-3 Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Description: libkmod shared library This library provides an API for insertion, removal, configuration and listing of kernel modules. Package: libpulse0 Status: install ok installed Priority: optional Section: libs Installed-Size: 888 Maintainer: Pulseaudio maintenance team Architecture: amd64 Multi-Arch: same Source: pulseaudio Version: 5.0-13 Depends: libasyncns0 (>= 0.3), libc6 (>= 2.15), libcap2 (>= 1:2.10), libdbus-1-3 (>= 1.1.1), libice6 (>= 1:1.0.0), libjson-c2 (>= 0.10), libsm6, libsndfile1 (>= 1.0.20), libsystemd0, libwrap0 (>= 7.6-4~), libx11-6, libx11-xcb1, libxcb1, libxtst6 Pre-Depends: multiarch-support Suggests: pulseaudio Breaks: pavucontrol (<< 0.9.8) Conffiles: /etc/pulse/client.conf bdea965cdb68b445c04a1fa62193c096 Description: PulseAudio client libraries PulseAudio, previously known as Polypaudio, is a sound server for POSIX and WIN32 systems. It is a drop in replacement for the ESD sound server with much better latency, mixing/re-sampling quality and overall architecture. . Client libraries used by applications that access a PulseAudio sound server via PulseAudio's native interface. Homepage: http://www.pulseaudio.org Package: libxmuu1 Status: install ok installed Priority: optional Section: libs Installed-Size: 66 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxmu Version: 2:1.1.2-1 Depends: libc6 (>= 2.2.5), libx11-6 Pre-Depends: multiarch-support Description: X11 miscellaneous micro-utility library libXmuu provides a set of miscellaneous utility convenience functions for X libraries to use. It is a lighter version of libXmu that does not depend on libXt or libXext; for more information on libXmu, see libxmu6. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXmu Package: libxml2 Status: install ok installed Priority: standard Section: libs Installed-Size: 1765 Maintainer: Debian XML/SGML Group Architecture: amd64 Multi-Arch: same Version: 2.9.1+dfsg1-5+deb8u1 Depends: libc6 (>= 2.15), liblzma5 (>= 5.1.1alpha+20120614), zlib1g (>= 1:1.2.3.3) Pre-Depends: multiarch-support Recommends: xml-core Description: GNOME XML library XML is a metalanguage to let you design your own markup language. A regular markup language defines a way to describe information in a certain class of documents (eg HTML). XML lets you define your own customized markup languages for many classes of document. It can do this because it's written in SGML, the international standard metalanguage for markup languages. . This package provides a library providing an extensive API to handle such XML data files. Homepage: http://xmlsoft.org/ Package: libutempter0 Status: install ok installed Priority: optional Section: libs Installed-Size: 84 Maintainer: Debian Krap Maintainers Architecture: amd64 Source: libutempter Version: 1.1.5-4 Depends: libc6 (>= 2.2.5), adduser Description: A privileged helper for utmp/wtmp updates (runtime) The libutempter library provides interface for terminal emulators such as screen and xterm to record user sessions to utmp and wtmp files. . The utempter is a privileged helper used by libutempter library to manipulate utmp and wtmp files. Homepage: http://freshmeat.net/projects/libutempter Package: libblkid1 Status: install ok installed Priority: required Section: libs Installed-Size: 326 Maintainer: Debian util-linux Maintainers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.25.2-6 Depends: libc6 (>= 2.17), libuuid1 (>= 2.16) Pre-Depends: multiarch-support Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifying filesystems by hard-coded device names, but via a logical naming system instead. Package: libxfont1 Status: install ok installed Priority: optional Section: libs Installed-Size: 244 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxfont Version: 1:1.5.1-1 Depends: libbz2-1.0, libc6 (>= 2.14), libfontenc1, libfreetype6 (>= 2.2.1), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Breaks: xfs (<< 1:1.1.4) Conflicts: xprint (<< 2:1.6.0-1) Description: X11 font rasterisation library libXfont provides various services for X servers, most notably font selection and rasterisation (through external libraries). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXfont Package: xserver-xorg-video-radeon Status: install ok installed Priority: optional Section: x11 Installed-Size: 780 Maintainer: Debian X Strike Force Architecture: amd64 Source: xserver-xorg-video-ati Version: 1:7.5.0-1 Provides: xorg-driver-video Depends: libc6 (>= 2.17), libdrm-radeon1 (>= 2.4.39), libpciaccess0, libudev1 (>= 183), xorg-video-abi-18, xserver-xorg-core (>= 2:1.15.99.903) Suggests: firmware-linux Description: X.Org X server -- AMD/ATI Radeon display driver This package provides the 'radeon' driver for the AMD/ATI cards. The following chips should be supported: R100, RV100, RS100, RV200, RS200, RS250, R200, RV250, RV280, RS300, RS350, RS400/RS480, R300, R350, R360, RV350, RV360, RV370, RV380, RV410, R420, R423/R430, R480/R481, RV505/RV515/RV516/RV550, R520, RV530/RV560, RV570/R580, RS600/RS690/RS740, R600, RV610/RV630, RV620/RV635, RV670, RS780/RS880, RV710/RV730, RV740/RV770/RV790, CEDAR, REDWOOD, JUNIPER, CYPRESS, HEMLOCK, PALM, SUMO/SUMO2, BARTS, TURKS, CAICOS, CAYMAN, ARUBA. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-ati driver module. Package: libfreetype6 Status: install ok installed Priority: optional Section: libs Installed-Size: 889 Maintainer: Steve Langasek Architecture: amd64 Multi-Arch: same Source: freetype Version: 2.5.2-3+deb8u1 Depends: libc6 (>= 2.14), libpng12-0 (>= 1.2.13-4), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: FreeType 2 font engine, shared library files The FreeType project is a team of volunteers who develop free, portable and high-quality software solutions for digital typography. They specifically target embedded systems and focus on bringing small, efficient and ubiquitous products. . The FreeType 2 library is their new software font engine. It has been designed to provide the following important features: * A universal and simple API to manage font files * Support for several font formats through loadable modules * High-quality anti-aliasing * High portability & performance . Supported font formats include: * TrueType files (.ttf) and collections (.ttc) * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format * Type 1 Multiple Master fonts. The FreeType 2 API also provides routines to manage design instances easily * Type 1 CID-keyed fonts * OpenType/CFF (.otf) fonts * CFF/Type 2 fonts * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with the Adobe SVG viewer plugin. * Windows FNT/FON bitmap fonts . This package contains the files needed to run programs that use the FreeType 2 library. . Home Page: http://www.freetype.org/ Authors: David Turner Robert Wilhelm Werner Lemberg Homepage: http://www.freetype.org Package: libxtst6 Status: install ok installed Priority: optional Section: libs Installed-Size: 45 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxtst (2:1.2.2-1) Version: 2:1.2.2-1+b1 Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6, libxi6, x11-common Pre-Depends: multiarch-support Description: X11 Testing -- Record extension library libXtst provides an X Window System client interface to the Record extension to the X protocol. . The Record extension allows X clients to synthesise input events, which is useful for automated testing. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXtst Package: libxmu6 Status: install ok installed Priority: optional Section: libs Installed-Size: 153 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxmu Version: 2:1.1.2-1 Depends: libc6 (>= 2.14), libx11-6, libxext6, libxt6 Pre-Depends: multiarch-support Description: X11 miscellaneous utility library libXmu provides a set of miscellaneous utility convenience functions for X libraries to use. libXmuu is a lighter-weight version that does not depend on libXt or libXext; for more information, see libxmuu1. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXmu Package: libtasn1-6 Status: install ok installed Priority: standard Section: libs Installed-Size: 100 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Version: 4.2-3+deb8u1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Manage ASN.1 structures (runtime) Manage ASN1 (Abstract Syntax Notation One) structures. The main features of this library are: * on-line ASN1 structure management that doesn't require any C code file generation. * off-line ASN1 structure management with C code file generation containing an array. * DER (Distinguish Encoding Rules) encoding * no limits for INTEGER and ENUMERATED values . This package contains runtime libraries. Homepage: http://www.gnu.org/software/libtasn1/ Package: libasound2 Status: install ok installed Priority: optional Section: libs Installed-Size: 1187 Maintainer: Debian ALSA Maintainers Architecture: amd64 Multi-Arch: same Source: alsa-lib Version: 1.0.28-1 Depends: libc6 (>= 2.16), libasound2-data (>= 1.0.28-1) Pre-Depends: multiarch-support Suggests: libasound2-plugins (>= 1.0.24) Breaks: bluez-alsa (<= 4.94-2), libasound2-plugin-equal (<= 0.6-1), libasound2-plugins (<< 1.0.24) Description: shared library for ALSA applications This package contains the ALSA library and its standard plugins, as well as the required configuration files. . ALSA is the Advanced Linux Sound Architecture. Homepage: http://www.alsa-project.org/ Package: libdrm2 Status: install ok installed Priority: optional Section: libs Installed-Size: 110 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libdrm Version: 2.4.58-2 Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Description: Userspace interface to kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. . This package provides the runtime environment for libdrm. Package: isc-dhcp-client Status: install ok installed Priority: important Section: net Installed-Size: 561 Maintainer: Debian ISC DHCP maintainers Architecture: amd64 Source: isc-dhcp Version: 4.3.1-6+deb8u2 Provides: dhcp-client Depends: libc6 (>= 2.15), libdns-export100, libirs-export91, libisc-export95, debianutils (>= 2.8.2), isc-dhcp-common (= 4.3.1-6+deb8u2), iproute2 Suggests: resolvconf, avahi-autoipd Conffiles: /etc/dhcp/dhclient-enter-hooks.d/debug 72de8917c04f1dd3003459b35adcc66d /etc/dhcp/dhclient-exit-hooks.d/debug 72de8917c04f1dd3003459b35adcc66d /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 9f5b3bd5f605e2debf1a7a88a705c1ba /etc/dhcp/dhclient.conf ed8f55fbf1e31a2ab1ac263818c99773 Description: DHCP client for automatically obtaining an IP address This is the Internet Software Consortium's DHCP client. . Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP (actually dhcpd includes much of the functionality of bootpd). It gives client machines "leases" for IP addresses and can automatically set their network configuration. If your machine depends on DHCP (especially likely if it's a workstation on a large network, or a laptop, or attached to a cable modem), keep this or another DHCP client installed. . Extra documentation can be found in the package isc-dhcp-common. Homepage: http://www.isc.org Package: lsb-base Status: install ok installed Priority: required Section: misc Installed-Size: 72 Maintainer: Debian LSB Team Architecture: all Multi-Arch: foreign Source: lsb Version: 4.1+Debian13+nmu1 Description: Linux Standard Base 4.1 init script functionality The Linux Standard Base (http://www.linuxbase.org/) is a standard core system that third-party applications written for Linux can depend upon. . This package only includes the init-functions shell library, which may be used by other packages' initialization scripts for console logging and other purposes. Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb Package: libgraphite2-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 165 Maintainer: Debian LibreOffice Team Architecture: amd64 Multi-Arch: same Source: graphite2 Version: 1.2.4-3 Replaces: libgraphite2-2.0.0 Provides: libgraphite2-2.0.0 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Breaks: libgraphite2-2.0.0 (<< 1.2.0) Description: Font rendering engine for Complex Scripts -- library Graphite is a system that can be used to create and use "smart fonts" capable of displaying writing systems with various complex behaviors, such as: contextual shaping, ligatures, reordering, split glyphs, bidirectionality, stacking diacritics and complex positioning. . This library was designed and developed by the NRSI (Non-Roman Script Initiative) within SIL International (www.sil.org) to act as a complement to other smart font rendering technologies with limited practical local extensibility. Its purpose is to help meet the needs of a very large number of "minority language" communities for local extensibility of complex script behaviors. . The behavior of the rendering engine for a given writing system is specified through extra tables added to a TrueType font. These tables are generated by compiling a GDL (Graphite Description Language) source file into a font using grcompiler. . This package contains the shared library. Package: procps Status: install ok installed Priority: important Section: admin Installed-Size: 670 Maintainer: Craig Small Architecture: amd64 Multi-Arch: foreign Version: 2:3.3.9-9 Provides: watch Depends: libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libprocps3, libtinfo5, lsb-base (>= 3.0-10), initscripts Recommends: psmisc Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1), xmem (<= 1.20-27.1) Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3) Conffiles: /etc/init.d/procps 021482ebab1024f5ed76e650e5191e8f /etc/sysctl.conf 76c1d8285c578d5e827c3e07b9738112 /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089 Description: /proc file system utilities This package provides command line and full screen utilities for browsing procfs, a "pseudo" file system dynamically generated by the kernel to provide information about the status of entries in its process table (such as whether the process is running, stopped, or a "zombie"). . It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop, snice, sysctl, tload, top, uptime, vmstat, w, and watch. Homepage: http://gitorious.org/procps Package: libpangoft2-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 274 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: pango1.0 Version: 1.36.8-3 Replaces: libpango1.0-0 (<< 1.32.5-2) Depends: libc6 (>= 2.4), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), libglib2.0-0 (>= 2.37.3), libharfbuzz0b (>= 0.9.9), libpango-1.0-0 (>= 1.36.0) Pre-Depends: multiarch-support Breaks: libpango1.0-0 (<< 1.32.5-2) Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Package: libxcb-sync1 Status: install ok installed Priority: optional Section: libs Installed-Size: 38 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.14), libxcb1 Pre-Depends: multiarch-support Description: X C Binding, sync extension This package contains the library files needed to run software using libxcb-sync, the sync extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: libgssapi-krb5-2 Status: install ok installed Priority: standard Section: libs Installed-Size: 393 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.12.1+dfsg-19+deb8u1 Depends: libc6 (>= 2.14), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkeyutils1 (>= 1.4), libkrb5-3 (= 1.12.1+dfsg-19+deb8u1), libkrb5support0 (>= 1.12~alpha1+dfsg) Pre-Depends: multiarch-support Suggests: krb5-doc, krb5-user Breaks: libgssglue1 (<< 0.2-2) Conffiles: /etc/gss/mech.d/README 27e753ba1dc72900d2892b8efef6e35e Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime library for the MIT Kerberos implementation of GSS-API used by applications and Kerberos clients. Homepage: http://web.mit.edu/kerberos/ Package: xauth Status: install ok installed Priority: optional Section: x11 Installed-Size: 98 Maintainer: Debian X Strike Force Architecture: amd64 Version: 1:1.0.9-1 Depends: libc6 (>= 2.14), libx11-6, libxau6, libxext6, libxmuu1 Description: X authentication utility xauth is a small utility to read and manipulate Xauthority files, which are used by servers and clients alike to control authentication and access to X sessions. Package: libgpg-error0 Status: install ok installed Priority: standard Section: libs Installed-Size: 444 Maintainer: Debian GnuPG Maintainers Architecture: amd64 Multi-Arch: same Source: libgpg-error Version: 1.17-3 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: library for common error values and messages in GnuPG components Library that defines common error values for all GnuPG components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt, pinentry, SmartCard Daemon and possibly more in the future. Homepage: http://www.gnupg.org/related_software/libgpg-error/ Package: evtest Status: install ok installed Priority: extra Section: utils Installed-Size: 35 Maintainer: Stephen Kitt Architecture: amd64 Version: 1:1.32-1 Depends: libc6 (>= 2.8) Recommends: evemu-tools Description: utility to monitor Linux input device events evtest monitors a Linux input device, displaying all the events it generates. . It can be used to determine mice button bindings, keymaps for exotic keyboards... It is commonly used to debug issues with input devices in X.Org. . evtest is now in maintenance mode and doesn't support all the features of the latest kernels; evemu-record from the evemu-tools package should be used instead. Homepage: http://cgit.freedesktop.org/evtest/ Package: xserver-xorg Status: install ok installed Priority: optional Section: x11 Installed-Size: 361 Maintainer: Debian X Strike Force Architecture: amd64 Source: xorg Version: 1:7.7+7 Provides: xserver Depends: xserver-xorg-core (>= 2:1.15.0.901), xserver-xorg-video-all | xorg-driver-video, xserver-xorg-input-all | xorg-driver-input, xserver-xorg-input-evdev, libc6 (>= 2.7), xkb-data (>= 1.4), x11-xkb-utils Recommends: libgl1-mesa-dri Description: X.Org X server This package depends on the full suite of the server and drivers for the X.Org X server. It does not provide the actual server itself. Package: libogg0 Status: install ok installed Priority: optional Section: libs Installed-Size: 76 Maintainer: Ron Lee Architecture: amd64 Multi-Arch: same Source: libogg Version: 1.3.2-1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Ogg bitstream library Libogg is a library for manipulating ogg bitstreams. It handles both making ogg bitstreams and getting packets from ogg bitstreams. Homepage: http://xiph.org/ogg/ Package: libsndfile1 Status: install ok installed Priority: optional Section: libs Installed-Size: 491 Maintainer: Erik de Castro Lopo Architecture: amd64 Multi-Arch: same Source: libsndfile Version: 1.0.25-9.1 Depends: libc6 (>= 2.14), libflac8 (>= 1.3.0), libvorbisenc2 (>= 1.1.2) Pre-Depends: multiarch-support Description: Library for reading/writing audio files libsndfile is a library of C routines for reading and writing files containing sampled audio data. . Various versions of WAV (integer, floating point, GSM, and compressed formats); Microsoft PCM, A-law and u-law formats; AIFF, AIFC and RIFX; various AU/SND formats (Sun/NeXT, Dec AU, G721 and G723 ADPCM); RAW header-less PCM files; Amiga IFF/8SVX/16SV PCM files; Ensoniq PARIS (.PAF); Apple's Core Audio Format (CAF) and others. Homepage: http://www.mega-nerd.com/libsndfile/ Package: libatk1.0-data Status: install ok installed Priority: optional Section: misc Installed-Size: 962 Maintainer: Debian GNOME Maintainers Architecture: all Multi-Arch: foreign Source: atk1.0 Version: 2.14.0-1 Description: Common files for the ATK accessibility toolkit ATK is a toolkit providing accessibility interfaces for applications or other toolkits. By implementing these interfaces, those other toolkits or applications can be used with tools such as screen readers, magnifiers, and other alternative input devices. . This contains the common files which the runtime libraries need. Homepage: http://www.gtk.org/ Package: xfonts-75dpi Status: install ok installed Priority: optional Section: fonts Installed-Size: 4488 Maintainer: Debian X Strike Force Architecture: all Version: 1:1.0.3 Depends: xfonts-utils (>= 1:7.5+2) Suggests: xfs | xserver Conffiles: /etc/X11/fonts/75dpi/xfonts-75dpi.alias 6bc48023f2ae7f3bfc105db7b0ee6b49 Description: 75 dpi fonts for X xfonts-75dpi provides a set of bitmapped fonts at 75 dots per inch. In most cases it is desirable to have the X font server (xfs) and/or an X server installed to make the fonts available to X clients. . This package contains only fonts in the ISO 10646-1 and ISO 8859-1 encodings, to conserve disk space. For other encodings, see the xfonts-75dpi-transcoded package. . This package and xfonts-100dpi provide the same set of fonts, rendered at different resolutions; only one or the other is necessary, but both may be installed. xfonts-75dpi may be more suitable for small monitors and/or small screen resolutions (under 1024x768). . This package requires the xfonts-utils package to prepare the font directories for use by an X server or X font server. Package: nano Status: install ok installed Priority: important Section: editors Installed-Size: 1667 Maintainer: Jordi Mallach Architecture: amd64 Version: 2.2.6-3 Replaces: pico Provides: editor Depends: dpkg (>= 1.15.4) | install-info, libc6 (>= 2.14), libncursesw5 (>= 5.6+20070908), libtinfo5 Suggests: spell Breaks: alpine-pico (<= 2.00+dfsg-5) Conflicts: pico Conffiles: /etc/nanorc fc57b93c907fefbccf12317d40b4a204 Description: small, friendly text editor inspired by Pico GNU nano is an easy-to-use text editor originally designed as a replacement for Pico, the ncurses-based editor from the non-free mailer package Pine (itself now available under the Apache License as Alpine). . However, nano also implements many features missing in pico, including: - feature toggles; - interactive search and replace (with regular expression support); - go to line (and column) command; - auto-indentation and color syntax-highlighting; - filename tab-completion and support for multiple buffers; - full internationalization support. Homepage: http://www.nano-editor.org/ Package: base-files Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 412 Maintainer: Santiago Vila Architecture: amd64 Multi-Arch: foreign Version: 8+deb8u3 Replaces: base, dpkg (<= 1.15.0), miscutils Provides: base Pre-Depends: awk Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~) Conffiles: /etc/debian_version 3b96d9b93fc13776d851a5690388ac4d /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6 /etc/issue a7eef95d86c3649a192350845d8cb2ae /etc/issue.net 8b9e8badfb7d547ef236e3165dd363e4 Description: Debian base system miscellaneous files This package contains the basic filesystem hierarchy of a Debian system, and several important miscellaneous files, such as /etc/debian_version, /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others, and the text of several common licenses in use on Debian systems. Package: libdrm-intel1 Status: install ok installed Priority: optional Section: libs Installed-Size: 194 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libdrm Version: 2.4.58-2 Depends: libc6 (>= 2.17), libdrm2 (>= 2.4.38), libpciaccess0 Pre-Depends: multiarch-support Description: Userspace interface to intel-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Package: libx11-xcb1 Status: install ok installed Priority: optional Section: libs Installed-Size: 235 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libx11 Version: 2:1.6.2-3 Depends: libc6 (>= 2.2.5), libx11-6 Pre-Depends: multiarch-support Description: Xlib/XCB interface library libX11-xcb provides functions needed by clients which take advantage of Xlib/XCB to mix calls to both Xlib and XCB over the same X connection. . More information about X.Org can be found at: . More information about XCB can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libX11 Package: libgmp10 Status: install ok installed Priority: optional Section: libs Installed-Size: 556 Maintainer: Debian Science Team Architecture: amd64 Multi-Arch: same Source: gmp Version: 2:6.0.0+dfsg-6 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Multiprecision arithmetic library GNU MP is a programmer's library for arbitrary precision arithmetic (ie, a bignum package). It can operate on signed integer, rational, and floating point numeric types. . It has a rich set of functions, and the functions have a regular interface. Homepage: http://gmplib.org/ Package: sensible-utils Status: install ok installed Priority: required Section: utils Installed-Size: 110 Maintainer: Anibal Monsalve Salazar Architecture: all Multi-Arch: foreign Version: 0.0.9 Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~) Description: Utilities for sensible alternative selection This package provides a number of small utilities which are used by programs to sensibly select and spawn an appropriate browser, editor, or pager. . The specific utilities included are: sensible-browser sensible-editor sensible-pager Package: libpixman-1-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1001 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: pixman Version: 0.32.6-3 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: pixel-manipulation library for X and cairo A library for manipulating pixel regions -- a set of Y-X banded rectangles, image compositing using the Porter/Duff model and implicit mask generation for geometric primitives including trapezoids, triangles, and rectangles. Package: libisc-export95 Status: install ok installed Priority: optional Section: libs Installed-Size: 350 Maintainer: LaMont Jones Architecture: amd64 Source: bind9 Version: 1:9.9.5.dfsg-9+deb8u4 Depends: libc6 (>= 2.15) Pre-Depends: multiarch-support Description: Exported ISC Shared Library The Berkeley Internet Name Domain (BIND) implements an Internet domain name server. BIND is the most widely-used name server software on the Internet, and is supported by the Internet Software Consortium, www.isc.org. . This package delivers the exported libisc shared library. Package: libxcursor1 Status: install ok installed Priority: optional Section: libs Installed-Size: 62 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcursor (1:1.1.14-1) Version: 1:1.1.14-1+b1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.4.99.1), libxfixes3, libxrender1 Pre-Depends: multiarch-support Description: X cursor management library Xcursor is a simple library designed to help locate and load cursors for the X Window System. Cursors can be loaded from files or memory and can exist in several sizes; the library automatically picks the best size. When using images loaded from files, Xcursor prefers to use the Render extension's CreateCursor request for rendering cursors. Where the Render extension is not supported, Xcursor maps the cursor image to a standard X cursor and uses the core X protocol CreateCursor request. Package: passwd Status: install ok installed Priority: required Section: admin Installed-Size: 2453 Maintainer: Shadow package maintainers Architecture: amd64 Multi-Arch: foreign Source: shadow Version: 1:4.2-3+deb8u1 Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1) Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules, debianutils (>= 2.15.2) Conffiles: /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63 Description: change and administer password and group data This package includes passwd, chsh, chfn, and many other programs to maintain password and group data. . Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian Homepage: http://pkg-shadow.alioth.debian.org/ Package: init-system-helpers Status: install ok installed Priority: extra Section: admin Installed-Size: 97 Maintainer: pkg-systemd-maintainers Architecture: all Multi-Arch: foreign Version: 1.22 Depends: perl-base (>= 5.20.1-3) Breaks: systemd (<< 44-12) Description: helper tools for all init systems This package contains helper tools that are necessary for switching between the various init systems that Debian contains (e.g. sysvinit, upstart, systemd). An example is deb-systemd-helper, a script that enables systemd unit files without depending on a running systemd. . While this package is maintained by pkg-systemd-maintainers, it is NOT specific to systemd at all. Maintainers of other init systems are welcome to include their helpers in this package. Package: xserver-xorg-video-vesa Status: install ok installed Priority: optional Section: x11 Installed-Size: 100 Maintainer: Debian X Strike Force Architecture: amd64 Source: xserver-xorg-video-vesa (1:2.3.3-1) Version: 1:2.3.3-1+b3 Provides: xorg-driver-video Depends: libc6 (>= 2.14), xorg-video-abi-18, xserver-xorg-core (>= 2:1.15.99.903) Description: X.Org X server -- VESA display driver This driver for the X.Org X server (see xserver-xorg for a further description) uses the standard VESA interface provided on all video cards, but runs unaccelerated. This driver is not recommended for use unless you have a problem with the normal driver for your card, because it will perform very badly. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-vesa driver module. Package: ncurses-base Essential: yes Status: install ok installed Priority: required Section: misc Installed-Size: 371 Maintainer: Craig Small Architecture: all Multi-Arch: foreign Source: ncurses Version: 5.9+20140913-1 Provides: ncurses-runtime Breaks: ncurses-term (<< 5.7+20100313-3) Conflicts: ncurses, ncurses-runtime Conffiles: /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171 Description: basic terminal type definitions The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains terminfo data files to support the most common types of terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220, vt52, and xterm. Homepage: http://invisible-island.net/ncurses/ Package: libxxf86dga1 Status: install ok installed Priority: optional Section: libs Installed-Size: 41 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxxf86dga (2:1.1.4-1) Version: 2:1.1.4-1+b1 Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6 Pre-Depends: multiarch-support Description: X11 Direct Graphics Access extension library libXxf86dga provides the XFree86-DGA extension, which allows direct graphics access to a framebuffer-like region, and also allows relative mouse reporting, et al. It is mainly used by games and emulators for games. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXxf86dga Package: libc-bin Essential: yes Status: install ok installed Priority: required Section: libs Installed-Size: 3263 Maintainer: GNU Libc Maintainers Architecture: amd64 Multi-Arch: foreign Source: glibc Version: 2.19-18+deb8u2 Replaces: libc0.1, libc0.3, libc6, libc6.1 Depends: libc6 (>> 2.19), libc6 (<< 2.20), libcap2 (>= 1:2.10) Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10) Conffiles: /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6 Description: GNU C Library: Binaries This package contains utility programs related to the GNU C Library. . * catchsegv: catch segmentation faults in programs * getconf: query system configuration variables * getent: get entries from administrative databases * iconv, iconvconfig: convert between character encodings * ldd, ldconfig: print/configure shared library dependencies * locale, localedef: show/generate locale definitions * tzselect, zdump, zic: select/dump/compile time zones Homepage: http://www.gnu.org/software/libc/libc.html Package: libsemanage1 Status: install ok installed Priority: optional Section: libs Installed-Size: 245 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libsemanage (2.3-1) Version: 2.3-1+b1 Depends: libsemanage-common (= 2.3-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.1.12), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4) Pre-Depends: multiarch-support Description: SELinux policy management library This package provides the shared libraries for SELinux policy management. It uses libsepol for binary policy manipulation and libselinux for interacting with the SELinux system. It also exec's helper programs for loading policy and for checking whether the file_contexts configuration is valid (load_policy and setfiles from policycoreutils) presently, although this may change at least for the bootstrapping case . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: http://userspace.selinuxproject.org/ Package: libsdl2-2.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1084 Maintainer: Debian SDL packages maintainers Architecture: amd64 Multi-Arch: same Source: libsdl2 Version: 2.0.2+dfsg1-6 Replaces: libsdl-1.3-0 Depends: libasound2 (>= 1.0.16), libc6 (>= 2.15), libpulse0 (>= 0.99.1), libwayland-client0 (>= 1.3.92), libwayland-cursor0 (>= 1.0.2), libwayland-egl1-mesa (>= 10.0.2) | libwayland-egl1, libx11-6 (>= 2:1.2.99.901), libxcursor1 (>> 1.1.2), libxext6, libxi6 (>= 2:1.2.99.4), libxinerama1, libxkbcommon0 (>= 0.2.0), libxrandr2 (>= 2:1.2.0), libxss1, libxxf86vm1 Pre-Depends: multiarch-support Conflicts: libsdl-1.3-0 Description: Simple DirectMedia Layer SDL is a library that allows programs portable low level access to a video framebuffer, audio output, mouse, and keyboard. . This version of SDL is compiled with X11, caca and DirectFB graphics drivers and OSS, ALSA, NAS and PulseAudio sound drivers. Homepage: http://www.libsdl.org/ Package: libgl1-mesa-glx Status: install ok installed Priority: optional Section: libs Installed-Size: 702 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 10.3.2-1+deb8u1 Replaces: libgl1, libgl1-mesa-dri (<< 6.4.0) Provides: libgl1 Depends: libc6 (>= 2.14), libdrm2 (>= 2.3.1), libexpat1 (>= 2.0.1), libglapi-mesa (= 10.3.2-1+deb8u1), libx11-6 (>= 2:1.4.99.1), libx11-xcb1, libxcb-dri2-0 (>= 1.8), libxcb-dri3-0, libxcb-glx0 (>= 1.8), libxcb-present0, libxcb-sync1, libxcb1 (>= 1.9.2), libxdamage1 (>= 1:1.1), libxext6, libxfixes3, libxshmfence1, libxxf86vm1, libudev1 Pre-Depends: multiarch-support Recommends: libgl1-mesa-dri (>= 7.2) Breaks: fglrx-glx (<< 1:11-6-1), glx-diversions (<< 0.4), libgl1-nvidia-alternatives (<= 275.09.07-1) Conflicts: libgl1, libgl1-mesa-dri (<< 6.4.0) Description: free implementation of the OpenGL API -- GLX runtime This version of Mesa provides GLX and DRI capabilities: it is capable of both direct and indirect rendering. For direct rendering, it can use DRI modules from the libgl1-mesa-dri package to accelerate drawing. . This package does not include the modules themselves: these can be found in the libgl1-mesa-dri package. . For a complete description of Mesa, please look at the libgl1-mesa-swx11 package. Homepage: http://mesa3d.sourceforge.net/ Package: libepoxy0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1036 Maintainer: Eric Anholt Architecture: amd64 Source: libepoxy Version: 1.2-1 Depends: libc6 (>= 2.7) Description: OpenGL function pointer management library It hides the complexity of dlopen(), dlsym(), glXGetProcAddress(), eglGetProcAddress(), etc. from the app developer, with very little knowledge needed on their part. They get to read GL specs and write code using undecorated function names like glCompileShader(). Homepage: https://github.com/anholt/libepoxy Package: udev Status: install ok installed Priority: important Section: admin Installed-Size: 6048 Maintainer: Debian systemd Maintainers Architecture: amd64 Multi-Arch: foreign Source: systemd Version: 215-17+deb8u3 Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libkmod2 (>= 5~), libselinux1 (>= 2.0.65), libudev1 (= 215-17+deb8u3), adduser, lsb-base (>= 3.0-6), util-linux (>= 2.16), procps Pre-Depends: debconf (>= 1.4.69) | debconf-2.0 Breaks: consolekit (<< 0.4.6-1), kmod (<< 14), plymouth (<< 0.9.0-7), systemd (<< 215-1) Conffiles: /etc/init.d/udev 988e81a81706a99e7f4b83988b386b00 /etc/init.d/udev-finish fd3ce194c134bcd790681ea487b19126 /etc/init/udev-fallback-graphics.conf b8bfe7164e10cd0e53494b243c5728b1 /etc/init/udev-finish.conf 089140a32d519840674be9a274da1a42 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18 /etc/modprobe.d/fbdev-blacklist.conf 0b9c466830040ec52986cc3ea117bef5 /etc/udev/udev.conf ae415f84e2967eff580089fb08aa0a61 Description: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. Homepage: http://www.freedesktop.org/wiki/Software/systemd Package: libnettle4 Status: install ok installed Priority: optional Section: libs Installed-Size: 331 Maintainer: Magnus Holmgren Architecture: amd64 Multi-Arch: same Source: nettle Version: 2.7.1-5 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: low level cryptographic library (symmetric and one-way cryptos) Nettle is a cryptographic library that is designed to fit easily in more or less any context: In crypto toolkits for object-oriented languages (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel space. . It tries to solve a problem of providing a common set of cryptographic algorithms for higher-level applications by implementing a context-independent set of cryptographic algorithms. In that light, Nettle doesn't do any memory allocation or I/O, it simply provides the cryptographic algorithms for the application to use in any environment and in any way it needs. . This package contains the symmetric and one-way cryptographic algorithms. To avoid having this package depend on libgmp, the asymmetric cryptos reside in a separate library, libhogweed. Homepage: http://www.lysator.liu.se/~nisse/nettle/ Package: iptables Status: install ok installed Priority: important Section: net Installed-Size: 3557 Maintainer: Laurence J. Lane Architecture: amd64 Source: iptables (1.4.21-2) Version: 1.4.21-2+b1 Depends: libc6 (>= 2.15), libnfnetlink0, libxtables10 (= 1.4.21-2+b1) Description: administration tools for packet filtering and NAT iptables is the userspace command line program used to configure the Linux packet filtering ruleset. It is targeted towards system administrators. Since Network Address Translation is also configured from the packet filter ruleset, iptables is used for this, too. The iptables package also includes ip6tables. ip6tables is used for configuring the IPv6 packet filter Homepage: http://www.netfilter.org/ Package: libatk1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 217 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: atk1.0 Version: 2.14.0-1 Depends: libc6 (>= 2.4), libglib2.0-0 (>= 2.41.1), libatk1.0-data (= 2.14.0-1) Pre-Depends: multiarch-support Description: ATK accessibility toolkit ATK is a toolkit providing accessibility interfaces for applications or other toolkits. By implementing these interfaces, those other toolkits or applications can be used with tools such as screen readers, magnifiers, and other alternative input devices. . This is the runtime part of ATK, needed to run applications built with it. Homepage: http://www.gtk.org/ Package: sysvinit-utils Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 147 Maintainer: Debian sysvinit maintainers Architecture: amd64 Source: sysvinit Version: 2.88dsf-59 Replaces: last, sysvinit (<= 2.86.ds1-65) Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), startpar Suggests: bootlogd, sash Breaks: upstart (<< 1.5-0ubuntu5) Conflicts: chkconfig (<< 11.0-79.1-2), last, startpar (<< 0.58-2), sysvconfig Description: System-V-like utilities This package contains the important System-V-like utilities. . Specifically, this package includes: killall5, last, lastb, mesg, pidof, service, sulogin Homepage: http://savannah.nongnu.org/projects/sysvinit Package: debian-archive-keyring Status: install ok installed Priority: important Section: misc Installed-Size: 108 Maintainer: Debian Release Team Architecture: all Multi-Arch: foreign Version: 2014.3 Depends: gpgv Recommends: gnupg Breaks: apt (<< 0.7.25.1) Conffiles: /etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg 548a861c55fdf06fb9b0419c30cd33ec /etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg 28ffc0824518a9d42fb40e5caad7c5ef /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b /etc/apt/trusted.gpg.d/debian-archive-squeeze-automatic.gpg 342e9f6a4bd60ac4e3f1fe74dc46e844 /etc/apt/trusted.gpg.d/debian-archive-squeeze-stable.gpg 2e662da7572ee5fe2e921c7b1de6e564 /etc/apt/trusted.gpg.d/debian-archive-wheezy-automatic.gpg e5d3c1f7461bc12685f9b331c60beadd /etc/apt/trusted.gpg.d/debian-archive-wheezy-stable.gpg 722258fff5af68c002429c4433bd228b Description: GnuPG archive keys of the Debian archive The Debian project digitally signs its Release files. This package contains the archive keys used for that. Package: libtext-iconv-perl Status: install ok installed Priority: required Section: perl Installed-Size: 92 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Source: libtext-iconv-perl (1.7-5) Version: 1.7-5+b2 Depends: libc6 (>= 2.2.5), perl-base (>= 5.20.0-4), perlapi-5.20.0 Description: converts between character sets in Perl The iconv() family of functions from XPG4 defines an API for converting between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They are provided by libc6. . This package allows access to them from Perl via the Text::Iconv package. Homepage: http://search.cpan.org/search?module=Text::Iconv Package: libapt-inst1.5 Status: install ok installed Priority: important Section: libs Installed-Size: 352 Maintainer: APT Development Team Architecture: amd64 Multi-Arch: same Source: apt Version: 1.0.9.8.2 Depends: libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.4.0) Pre-Depends: multiarch-support Description: deb package format runtime library This library provides methods to query and extract information from deb packages. This includes the control data and the package file content. Package: libisl10 Status: install ok installed Priority: optional Section: libs Installed-Size: 1417 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: isl Version: 0.12.2-2 Depends: libc6 (>= 2.14), libgmp10 Pre-Depends: multiarch-support Breaks: libcloog-isl4 (<< 0.18.1) Description: manipulating sets and relations of integer points bounded by linear constraints isl is a library for manipulating sets and relations of integer points bounded by linear constraints. Supported operations on sets include intersection, union, set difference, emptiness check, convex hull, (integer) affine hull, integer projection, and computing the lexicographic minimum using parametric integer programming. It also includes an ILP solver based on generalized basis reduction. . This package contains the runtime library. Homepage: http://freecode.com/projects/isl Package: libtext-wrapi18n-perl Status: install ok installed Priority: required Section: perl Installed-Size: 28 Maintainer: Anibal Monsalve Salazar Architecture: all Version: 0.06-7 Depends: libtext-charwidth-perl Description: internationalized substitute of Text::Wrap This module is a substitution for Text::Wrap, supporting multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth characters such as east Asian characters, combining characters such as diacritical marks and Thai, and languages which don't use whitespaces between words such as Chinese and Japanese. . It provides wrap(). Homepage: http://search.cpan.org/search?module=Text::WrapI18N Package: libsemanage-common Status: install ok installed Priority: optional Section: libs Installed-Size: 65 Maintainer: Debian SELinux maintainers Architecture: all Multi-Arch: foreign Source: libsemanage Version: 2.3-1 Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~) Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~) Conffiles: /etc/selinux/semanage.conf e69d42a4d98a93c3b8e201bdda367c55 Description: Common files for SELinux policy management libraries This package provides the common files used by the shared libraries for SELinux policy management. . Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Homepage: http://userspace.selinuxproject.org/ Package: libp11-kit0 Status: install ok installed Priority: standard Section: libs Installed-Size: 299 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: p11-kit Version: 0.20.7-1 Depends: libc6 (>= 2.16), libffi6 (>= 3.0.4) Pre-Depends: multiarch-support Description: Library for loading and coordinating access to PKCS#11 modules - runtime Provides a way to load and enumerate PKCS#11 modules. Provides a standard configuration setup for installing PKCS#11 modules in such a way that they're discoverable. . Also solves problems with coordinating the use of PKCS#11 by different components or libraries living in the same process. . This package contains the shared library required for applications loading and accessing PKCS#11 modules. Homepage: http://p11-glue.freedesktop.org/p11-kit.html Package: libpango-1.0-0 Status: install ok installed Priority: optional Section: libs Installed-Size: 510 Maintainer: Debian GNOME Maintainers Architecture: amd64 Multi-Arch: same Source: pango1.0 Version: 1.36.8-3 Replaces: libpango1.0-0 (<< 1.32.5-2) Provides: pango1.0-multiarch-modver-1.8.0 Depends: fontconfig (>= 2.1.91), libc6 (>= 2.14), libglib2.0-0 (>= 2.37.3), libthai0 (>= 0.1.12) Pre-Depends: multiarch-support Breaks: libpango1.0-0 (<< 1.32.5-2), plymouth (<< 0.8.3-19) Description: Layout and rendering of internationalized text Pango is a library for layout and rendering of text, with an emphasis on internationalization. Pango can be used anywhere that text layout is needed. however, most of the work on Pango-1.0 was done using the GTK+ widget toolkit as a test platform. Pango forms the core of text and font handling for GTK+-2.0. . Pango is designed to be modular; the core Pango layout can be used with four different font backends: - Core X windowing system fonts - Client-side fonts on X using the Xft library - Direct rendering of scalable fonts using the FreeType library - Native fonts on Microsoft backends . This package contains the shared libraries. Package: libgnutls-openssl27 Status: install ok installed Priority: standard Section: libs Installed-Size: 205 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: gnutls28 Version: 3.3.8-6+deb8u3 Depends: libgnutls-deb0-28 (= 3.3.8-6+deb8u3), libc6 (>= 2.14) Pre-Depends: multiarch-support Description: GNU TLS library - OpenSSL wrapper GnuTLS is a portable library which implements the Transport Layer Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram Transport Layer Security (DTLS 1.0, 1.2) protocols. . GnuTLS features support for: - TLS extensions: server name indication, max record size, opaque PRF input, etc. - authentication using the SRP protocol. - authentication using both X.509 certificates and OpenPGP keys. - TLS Pre-Shared-Keys (PSK) extension. - Inner Application (TLS/IA) extension. - X.509 and OpenPGP certificate handling. - X.509 Proxy Certificates (RFC 3820). - all the strong encryption algorithms (including SHA-256/384/512 and Camellia (RFC 4132)). . This package contains the runtime library of the GnuTLS OpenSSL wrapper. Homepage: http://www.gnutls.org/ Package: libwayland-egl1-mesa Status: install ok installed Priority: optional Section: libs Installed-Size: 88 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 10.3.2-1+deb8u1 Replaces: libegl1-mesa-drivers (<< 10.1.0-2), libwayland-egl1 Provides: libwayland-egl1 Depends: libc6 (>= 2.2.5), libegl1-mesa (= 10.3.2-1+deb8u1) Pre-Depends: multiarch-support Recommends: libegl1-mesa-drivers Breaks: libegl1-mesa-drivers (<< 10.1.0-2) Conflicts: libwayland-egl1 Description: implementation of the Wayland EGL platform -- runtime This package contains the mesa implementation of the Wayland EGL platform Homepage: http://mesa3d.sourceforge.net/ Package: libdebconfclient0 Status: install ok installed Priority: optional Section: libs Installed-Size: 53 Maintainer: Debian Install System Team Architecture: amd64 Multi-Arch: same Source: cdebconf Version: 0.192 Depends: libc6 (>= 2.2.5) Pre-Depends: multiarch-support Description: Debian Configuration Management System (C-implementation library) Debconf is a configuration management system for Debian packages. It is used by some packages to prompt you for information before they are installed. This is a reimplementation of the original debconf version in C. . This is the libraries needed by libdebconfclient-dev and cdebconf. Package: libgnutls-deb0-28 Status: install ok installed Priority: standard Section: libs Installed-Size: 1959 Maintainer: Debian GnuTLS Maintainers Architecture: amd64 Multi-Arch: same Source: gnutls28 Version: 3.3.8-6+deb8u3 Replaces: gnutls0, gnutls0.4, gnutls3 Depends: libc6 (>= 2.17), libgmp10 (>= 2:6), libhogweed2 (>= 2.7), libnettle4 (>= 2.7), libp11-kit0 (>= 0.20.7), libtasn1-6 (>= 4.1-0), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Suggests: gnutls-bin Conflicts: gnutls0, gnutls0.4 Description: GNU TLS library - main runtime library GnuTLS is a portable library which implements the Transport Layer Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram Transport Layer Security (DTLS 1.0, 1.2) protocols. . GnuTLS features support for: - TLS extensions: server name indication, max record size, opaque PRF input, etc. - authentication using the SRP protocol. - authentication using both X.509 certificates and OpenPGP keys. - TLS Pre-Shared-Keys (PSK) extension. - Inner Application (TLS/IA) extension. - X.509 and OpenPGP certificate handling. - X.509 Proxy Certificates (RFC 3820). - all the strong encryption algorithms (including SHA-256/384/512 and Camellia (RFC 4132)). . This package contains the main runtime library. Homepage: http://www.gnutls.org/ Package: libselinux1 Status: install ok installed Priority: required Section: libs Installed-Size: 213 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libselinux Version: 2.3-2 Depends: libc6 (>= 2.14), libpcre3 (>= 8.10) Pre-Depends: multiarch-support Description: SELinux runtime shared libraries This package provides the shared libraries for Security-enhanced Linux that provides interfaces (e.g. library functions for the SELinux kernel APIs like getcon(), other support functions like getseuserbyname()) to SELinux-aware applications. Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. . libselinux1 provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API. libselinux may use the shared libsepol to manipulate the binary policy if necessary (e.g. to downgrade the policy format to an older version supported by the kernel) when loading policy. Homepage: http://userspace.selinuxproject.org/ Package: systemd Status: install ok installed Priority: important Section: admin Installed-Size: 13838 Maintainer: Debian systemd Maintainers Architecture: amd64 Version: 215-17+deb8u3 Depends: libacl1 (>= 2.2.51-8), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libkmod2 (>= 5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9), libsystemd0 (= 215-17+deb8u3), util-linux (>= 2.19.1-2), mount (>= 2.21), initscripts (>= 2.88dsf-53.2), sysv-rc, udev (>= 208-8), acl, adduser, libcap2-bin Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32) Recommends: libpam-systemd, dbus Suggests: systemd-ui Breaks: lsb-base (<< 4.1+Debian4), lvm2 (<< 2.02.104-1), systemd-shim (<< 8-2) Conflicts: klogd Conffiles: /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190 /etc/dbus-1/system.d/org.freedesktop.login1.conf 96bf488f3da8f0ca813cc78e71eeb605 /etc/dbus-1/system.d/org.freedesktop.machine1.conf d658acaf7192de735ab798c58ab149ae /etc/dbus-1/system.d/org.freedesktop.systemd1.conf 46533268285a0df22b1f1667ddc05642 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe /etc/pam.d/systemd-user aebb8b8a2c698614b00961f327a683ef /etc/systemd/bootchart.conf 838a83315ad2f9d4c4b7f20b7475ba28 /etc/systemd/journald.conf 51f19202dcc5aff6d2c3448dbf92f354 /etc/systemd/logind.conf 747ae2312b6922546190bf806d8d12be /etc/systemd/resolved.conf 81a9c57d4eb587decc49040595674c5a /etc/systemd/system.conf 3d0e13a72d72acb55409a831b72a15e6 /etc/systemd/timesyncd.conf 605e4f25097b8ea22f2f5cb3fde3f13c /etc/systemd/user.conf 9eaad8fbb7bb6230d4b28abb76b4e81c Description: system and service manager systemd is a replacement for sysvinit. It is dependency-based and able to read the LSB init script headers in addition to parsing rcN.d links as hints. . It also provides process supervision using cgroups and the ability to not only depend on other init script being started, but also availability of a given mount point or dbus service. . Installing the systemd package will not switch your init system unless you boot with init=/bin/systemd or install systemd-sysv in addition. Homepage: http://www.freedesktop.org/wiki/Software/systemd Package: dpkg Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 7197 Origin: debian Maintainer: Dpkg Developers Bugs: debbugs://bugs.debian.org Architecture: amd64 Multi-Arch: foreign Version: 1.17.26 Replaces: manpages-it (<< 2.80-4) Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4), tar (>= 1.23) Suggests: apt Breaks: apt (<< 0.7.7~), apt-cudf (<< 3.3~beta1-3~), aptitude (<< 0.4.7-1~), auctex (<< 11.87-3+deb8u1~), ccache (<< 3.1.10-1~), cups (<< 1.7.5-10~), debian-security-support (<< 2014.10.26~), distcc (<< 3.1-6.1~), doc-base (<< 0.10.5~), dpkg-dev (<< 1.15.8), fontconfig (<< 2.11.0-6.2~), fusionforge-plugin-mediawiki (<< 5.3.2+20141104-3~), gap-core (<< 4r7p5-2~), gitweb (<< 1:2.1.4-2.1~), grace (<< 1:5.1.24-3~), gxine (<< 0.5.908-3.1~), hoogle (<< 4.2.33-4~), icecc (<< 1.0.1-2~), install-info (<< 5.1.dfsg.1-3~), libapache2-mod-php5 (<< 5.6.4+dfsg-3~), libapache2-mod-php5filter (<< 5.6.4+dfsg-3~), libdpkg-perl (<< 1.15.8), libjs-protoaculous (<< 5~), man-db (<< 2.6.3-6~), mcollective (<< 2.6.0+dfsg-2.1~), php5-fpm (<< 5.6.4+dfsg-3~), pypy (<< 2.4.0+dfsg-3~), readahead-fedora (<< 2:1.5.6-5.2~), wordpress (<< 4.1+dfsg-1~), xfonts-traditional (<< 1.7~), xine-ui (<< 0.99.9-1.2~) Conflicts: ada-reference-manual (<< 20021112web-4~), asn1-mode (<< 2.7-7~), bogosort (<< 0.4.2-3~), cl-yacc (<< 0.3-3~), cpp-4.1-doc (<< 4.1.2.nf2-4~), cpp-4.2-doc (<< 4.2.4.nf1-4~), gcc-4.1-doc (<< 4.1.2.nf2-4~), gcc-4.2-doc (<< 4.2.4.nf1-4~), gcj-4.1-doc (<< 4.1.2.nf2-4~), gcj-4.2-doc (<< 4.2.4.nf1-4~), gfortran-4.1-doc (<< 4.1.2.nf2-4~), gfortran-4.2-doc (<< 4.2.4.nf1-4~), ggz-docs (<< 0.0.14.1-2~), glame (<< 2.0.1-6~), gnat-4.1-doc (<< 4.1.2.nf2-4~), gnat-4.2-doc (<< 4.2.4.nf1-4~), gtalk (<< 0.99.10-16~), libalogg-dev (<< 1.3.7-2~), libgtk1.2-doc (<< 1.2.10-19~), libnettle-dev (<< 2~), liborbit-dev (<< 0.5.17-12~), libreadline5-dev (<< 5.2-8~), librep-doc (<< 0.90~), mmucl (<< 1.5.2-3~), nxml-mode (<< 20041004-9~), octave3.0-info (<< 1:3.0.5-7+rm), octave3.2-info (<< 3.2.4-12+rm), polgen-doc (<< 1.3-3+rm), r6rs-doc (<< 1.0-2~), serveez-doc (<< 0.1.5-3~), slat (<< 2.0-6~), texlive-base-bin-doc (<< 2007.dfsg.2-9~), ttcn-el (<< 0.6.9-2~), ulog-acctd (<< 0.4.3-3~), xconq-doc (<< 7.4.1-5~), zenirc (<< 2.112.dfsg-1~) Conffiles: /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9 Description: Debian package management system This package provides the low-level infrastructure for handling the installation and removal of Debian software packages. . For Debian package development tools, install dpkg-dev. Homepage: https://wiki.debian.org/Teams/Dpkg Package: libmtdev1 Status: install ok installed Priority: optional Section: libs Installed-Size: 79 Maintainer: Nobuhiro Iwamatsu Architecture: amd64 Multi-Arch: same Source: mtdev Version: 1.1.5-1 Depends: libc6 (>= 2.2.5) Pre-Depends: multiarch-support Description: Multitouch Protocol Translation Library - shared library libmtdev is a library for translating evdev multitouch events using the legacy protocol to the new multitouch slots protocol. This is necessary for kernel drivers that have not been updated to use the newer protocol. Homepage: http://bitmath.org/code/mtdev/ Package: wget Status: install ok installed Priority: important Section: web Installed-Size: 1725 Maintainer: Noël Köthe Architecture: amd64 Multi-Arch: foreign Version: 1.16-1 Depends: libc6 (>= 2.17), libgnutls-deb0-28 (>= 3.3.0), libidn11 (>= 1.13), libnettle4, libpsl0 (>= 0.4.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Recommends: ca-certificates Conflicts: wget-ssl Conffiles: /etc/wgetrc 618c05b4106ad20141dcf6deada2e87f Description: retrieves files from the web Wget is a network utility to retrieve files from the web using HTTP(S) and FTP, the two most widely used internet protocols. It works non-interactively, so it will work in the background, after having logged off. The program supports recursive retrieval of web-authoring pages as well as FTP sites -- you can use Wget to make mirrors of archives and home pages or to travel the web like a WWW robot. . Wget works particularly well with slow or unstable connections by continuing to retrieve a document until the document is fully downloaded. Re-getting files from where it left off works on servers (both HTTP and FTP) that support it. Both HTTP and FTP retrievals can be time stamped, so Wget can see if the remote file has changed since the last retrieval and automatically retrieve the new version if it has. . Wget supports proxy servers; this can lighten the network load, speed up retrieval, and provide access behind firewalls. Homepage: http://www.gnu.org/software/wget/ Package: vim-common Status: install ok installed Priority: important Section: editors Installed-Size: 404 Maintainer: Debian Vim Maintainers Architecture: amd64 Source: vim Version: 2:7.4.488-7 Replaces: vim-gui-common (<< 2:7.4.488-4~) Depends: libc6 (>= 2.3.4) Recommends: vim | vim-gnome | vim-gtk | vim-athena | vim-nox | vim-tiny Breaks: vim-gui-common (<< 2:7.4.488-4~) Conffiles: /etc/vim/vimrc 5fd31a932a5738dd87418b1b201dcf7c Description: Vi IMproved - Common files Vim is an almost compatible version of the UNIX editor Vi. . Many new features have been added: multi level undo, syntax highlighting, command line history, on-line help, filename completion, block operations, folding, Unicode support, etc. . This package contains files shared by all non GUI-enabled vim variants (vim and vim-tiny currently) available in Debian. Examples of such shared files are: manpages, common executables like xxd, and configuration files. Homepage: http://www.vim.org/ Package: xfonts-100dpi Status: install ok installed Priority: optional Section: fonts Installed-Size: 4820 Maintainer: Debian X Strike Force Architecture: all Version: 1:1.0.3 Depends: xfonts-utils (>= 1:7.5+2) Suggests: xfs | xserver Conffiles: /etc/X11/fonts/100dpi/xfonts-100dpi.alias 85bebd6ca213aa656c301a72eb4397cb Description: 100 dpi fonts for X xfonts-100dpi provides a set of bitmapped fonts at 100 dots per inch. In most cases it is desirable to have the X font server (xfs) and/or an X server installed to make the fonts available to X clients. . This package contains only fonts in the ISO 10646-1 and ISO 8859-1 encodings, to conserve disk space. For other encodings, see the xfonts-100dpi-transcoded package. . This package and xfonts-75dpi provide the same set of fonts, rendered at different resolutions; only one or the other is necessary, but both may be installed. xfonts-100dpi may be more suitable for large monitors and/or large screen resolutions (over 1024x768). . This package requires the xfonts-utils package to prepare the font directories for use by an X server or X font server. Package: libice6 Status: install ok installed Priority: optional Section: libs Installed-Size: 122 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libice (2:1.0.9-1) Version: 2:1.0.9-1+b1 Depends: libc6 (>= 2.14), x11-common Pre-Depends: multiarch-support Description: X11 Inter-Client Exchange library This package provides the main interface to the X11 Inter-Client Exchange library, which allows for communication of data between X clients. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libICE Package: libfontenc1 Status: install ok installed Priority: optional Section: libs Installed-Size: 43 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libfontenc (1:1.1.2-1) Version: 1:1.1.2-1+b2 Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: X11 font encoding library libfontenc is a library which helps font libraries portably determine and deal with different encodings of fonts. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libfontenc Package: libxcomposite1 Status: install ok installed Priority: optional Section: libs Installed-Size: 56 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxcomposite Version: 1:0.4.4-1 Depends: libc6 (>= 2.2.5), libx11-6 (>= 2:1.4.99.1) Pre-Depends: multiarch-support Description: X11 Composite extension library libXcomposite provides an X Window System client interface to the Composite extension to the X protocol. . The Composite extension allows clients called compositing managers to control the final drawing of the screen. Rendering is done into an off-screen buffer. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXcomposite Package: sysv-rc Status: install ok installed Priority: required Section: admin Installed-Size: 125 Maintainer: Debian sysvinit maintainers Architecture: all Multi-Arch: foreign Source: sysvinit Version: 2.88dsf-59 Replaces: file-rc Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10), startpar Recommends: lsb-base (>= 3.2-14) Suggests: bum Breaks: initscripts (<< 2.86.ds1-63) Conflicts: file-rc Description: System-V-like runlevel change mechanism This package provides support for the System-V like system for booting, changing runlevels, and shutting down, configured through symbolic links in /etc/rc?.d/. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: tasksel-data Status: install ok installed Priority: important Section: admin Installed-Size: 551 Maintainer: Debian Install System Team Architecture: all Source: tasksel Version: 3.31+deb8u1 Depends: tasksel (= 3.31+deb8u1) Recommends: laptop-detect Conflicts: tasksel (<< 2.67) Description: official tasks used for installation of Debian systems This package contains data about the standard tasks available on a Debian system. Package: apt Status: install ok installed Priority: important Section: admin Installed-Size: 3177 Maintainer: APT Development Team Architecture: amd64 Version: 1.0.9.8.2 Replaces: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0) Depends: libapt-pkg4.12 (>= 1.0.9.8.2), libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9), debian-archive-keyring, gnupg Suggests: aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), apt-doc, python-apt Breaks: manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0) Conflicts: python-apt (<< 0.7.93.2~) Conffiles: /etc/apt/apt.conf.d/01autoremove 5bf3e7bfa3bec23d634c9f3652da1787 /etc/cron.daily/apt 4f33a76ad3e46913db2be02f0b587933 /etc/kernel/postinst.d/apt-auto-removal 5d7236fb0c051eec2f5156b641fc447b /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3 Description: commandline package manager This package provides commandline tools for searching and managing as well as querying information about packages as a low-level access to all features of the libapt-pkg library. . These include: * apt-get for retrieval of packages and information about them from authenticated sources and for installation, upgrade and removal of packages together with their dependencies * apt-cache for querying available information about installed as well as installable packages * apt-cdrom to use removable media as a source for packages * apt-config as an interface to the configuration settings * apt-key as an interface to manage authentication keys Package: libxcb-shm0 Status: install ok installed Priority: optional Section: libs Installed-Size: 23 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.4), libxcb1 (>= 1.9.2) Pre-Depends: multiarch-support Description: X C Binding, shm extension This package contains the library files needed to run software using libxcb-shm, the shm extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: liblocale-gettext-perl Status: install ok installed Priority: required Section: perl Installed-Size: 37 Maintainer: Debian Perl Group Architecture: amd64 Source: liblocale-gettext-perl (1.05-8) Version: 1.05-8+b1 Depends: libc6 (>= 2.2.5) Pre-Depends: perl-base (>= 5.20.0-4), perlapi-5.20.0 Description: module using libc functions for internationalization in Perl The gettext module permits access from perl to the gettext() family of functions for retrieving message strings from databases constructed to internationalize software. . It provides gettext(), dgettext(), dcgettext(), textdomain(), bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext() and dngettext(). Homepage: https://metacpan.org/release/gettext Package: libmpfr4 Status: install ok installed Priority: optional Section: libs Installed-Size: 789 Maintainer: Debian QA Group Architecture: amd64 Multi-Arch: same Source: mpfr4 Version: 3.1.2-2 Depends: libc6 (>= 2.14), libgmp10 Pre-Depends: multiarch-support Conflicts: libgmp3 (<< 4.1.4-3) Description: multiple precision floating-point computation MPFR provides a library for multiple-precision floating-point computation with correct rounding. The computation is both efficient and has a well-defined semantics. It copies the good ideas from the ANSI/IEEE-754 standard for double-precision floating-point arithmetic (53-bit mantissa). Homepage: http://www.mpfr.org/ Package: dmsetup Status: install ok installed Priority: optional Section: admin Installed-Size: 123 Maintainer: Debian LVM Team Architecture: amd64 Multi-Arch: foreign Source: lvm2 (2.02.111-2.2) Version: 2:1.02.90-2.2 Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.90), util-linux (>> 2.16) Conflicts: devicekit-disks (<< 009) Description: Linux Kernel Device Mapper userspace library The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. . This package contains a utility for modifying device mappings. Homepage: http://sources.redhat.com/lvm2/ Package: libxpm4 Status: install ok installed Priority: optional Section: libs Installed-Size: 123 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxpm (1:3.5.11-1) Version: 1:3.5.11-1+b1 Depends: libc6 (>= 2.14), libx11-6 Pre-Depends: multiarch-support Description: X11 pixmap library libXpm provides support and common operation for the XPM pixmap format, which is commonly used in legacy X applications. XPM is an extension of the monochrome XBM bitmap specified in the X protocol. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXpm Package: x11-xserver-utils Status: install ok installed Priority: optional Section: x11 Installed-Size: 443 Maintainer: Debian X Strike Force Architecture: amd64 Source: x11-xserver-utils (7.7+3) Version: 7.7+3+b1 Replaces: iceauth, sessreg, xbase-clients (<< 1:7.3), xgamma, xhost, xmodmap, xrandr, xrdb, xrefresh, xrgb, xset, xsetmode, xsetpointer, xsetroot, xstdcmap, xutils (<< 1:7.2), xvidtune Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libx11-6, libxaw7, libxcursor1 (>> 1.1.2), libxext6, libxi6, libxmu6, libxmuu1, libxrandr2 (>= 2:1.4.0), libxrender1, libxt6, libxxf86vm1, cpp Suggests: nickle, cairo-5c, xorg-docs-core Conflicts: iceauth, sessreg, xgamma, xhost, xmodmap, xrandr, xrdb, xrefresh, xrgb, xset, xsetmode, xsetpointer, xsetroot, xstdcmap, xvidtune Conffiles: /etc/X11/app-defaults/Xvidtune 0493a0782b498e9f0dee51a4013a80e6 Description: X server utilities An X client is a program that interfaces with an X server (almost always via the X libraries), and thus with some input and output hardware like a graphics card, monitor, keyboard, and pointing device (such as a mouse). . This package provides a miscellaneous assortment of X Server utilities that ship with the X Window System, including: - iceauth, a tool for manipulating ICE protocol authorization records; - rgb; - sessreg, a simple program for managing utmp/wtmp entries; - xcmsdb, a device color characteristic utility for the X Color Management System; - xgamma, a tool for querying and setting a monitor's gamma correction; - xhost, a very dangerous program that you should never use; - xmodmap, a utility for modifying keymaps and pointer button mappings in X; - xrandr, a command-line interface to the RandR extension; - xrdb, a tool to manage the X server resource database; - xrefresh, a tool that forces a redraw of the X screen; - xset, a tool for setting miscellaneous X server parameters; - xsetmode and xsetpointer, tools for handling X Input devices; - xsetroot, a tool for tailoring the appearance of the root window; - xstdcmap, a utility to selectively define standard colormap properties; - xvidtune, a tool for customizing X server modelines for your monitor. Package: libxt6 Status: install ok installed Priority: optional Section: libs Installed-Size: 494 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxt (1:1.1.4-1) Version: 1:1.1.4-1+b1 Depends: libc6 (>= 2.14), libice6 (>= 1:1.0.0), libsm6, libx11-6 Pre-Depends: multiarch-support Description: X11 toolkit intrinsics library libXt provides the X Toolkit Intrinsics, an abstract widget library upon which other toolkits are based. Xt is the basis for many toolkits, including the Athena widgets (Xaw), and LessTif (a Motif implementation). . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXt Package: libpciaccess0 Status: install ok installed Priority: optional Section: libs Installed-Size: 108 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libpciaccess (0.13.2-3) Version: 0.13.2-3+b1 Depends: libc6 (>= 2.7), zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Suggests: pciutils Description: Generic PCI access library for X Provides functionality for X to access the PCI bus and devices in a platform-independent way. Package: libxcb-shape0 Status: install ok installed Priority: optional Section: libs Installed-Size: 24 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.4), libxcb1 Pre-Depends: multiarch-support Description: X C Binding, shape extension This package contains the library files needed to run software using libxcb-shape, the shape extension for the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: libxrender1 Status: install ok installed Priority: optional Section: libs Installed-Size: 87 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxrender (1:0.9.8-1) Version: 1:0.9.8-1+b1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0) Pre-Depends: multiarch-support Description: X Rendering Extension client library The X Rendering Extension (Render) introduces digital image composition as the foundation of a new rendering model within the X Window System. Rendering geometric figures is accomplished by client-side tessellation into either triangles or trapezoids. Text is drawn by loading glyphs into the server and rendering sets of them. The Xrender library exposes this extension to X clients. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXrender Package: diffutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 950 Maintainer: Santiago Vila Architecture: amd64 Source: diffutils (1:3.3-1) Version: 1:3.3-1+b1 Replaces: diff Pre-Depends: libc6 (>= 2.17) Suggests: diffutils-doc, wdiff Description: File comparison utilities The diffutils package provides the diff, diff3, sdiff, and cmp programs. . `diff' shows differences between two files, or each corresponding file in two directories. `cmp' shows the offsets and line numbers where two files differ. `cmp' can also show all the characters that differ between the two files, side by side. `diff3' shows differences among three files. `sdiff' merges two files interactively. . The set of differences produced by `diff' can be used to distribute updates to text files (such as program source code) to other people. This method is especially useful when the differences are small compared to the complete files. Given `diff' output, the `patch' program can update, or "patch", a copy of the file. Homepage: http://www.gnu.org/software/diffutils/ Package: libcloog-isl4 Status: install ok installed Priority: optional Section: libs Installed-Size: 204 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: cloog (0.18.2-1) Version: 0.18.2-1+b2 Depends: libc6 (>= 2.14), libgmp10, libisl10 (>= 0.11) Pre-Depends: multiarch-support Description: Chunky Loop Generator (runtime library) CLooG is a software which generates loops for scanning Z-polyhedra. . This package contains the runtime library. Homepage: http://www.CLooG.org Package: libxv1 Status: install ok installed Priority: optional Section: libs Installed-Size: 37 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxv (2:1.0.10-1) Version: 2:1.0.10-1+b1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6 Pre-Depends: multiarch-support Description: X11 Video extension library libXv provides an X Window System client interface to the XVideo extension to the X protocol. . The XVideo extension allows for accelerated drawing of videos. Hardware adaptors are exposed to clients, which may draw in a number of colourspaces, including YUV. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXv Package: man-db Status: install ok installed Priority: important Section: doc Installed-Size: 2514 Maintainer: Colin Watson Architecture: amd64 Multi-Arch: foreign Version: 2.7.0.2-5 Replaces: man, manpages-de (<< 0.5-4), manpages-zh (<< 1.5.2-1.1), nlsutils Provides: man, man-browser Depends: groff-base (>= 1.18.1.1-15), bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, libc6 (>= 2.17), libgdbm3 (>= 1.8.3), libpipeline1 (>= 1.3.0), zlib1g (>= 1:1.1.4) Pre-Depends: dpkg (>= 1.16.1~) Suggests: groff, less, www-browser Breaks: manpages-zh (<< 1.5.2-1.1) Conflicts: man, suidmanager (<< 0.50) Conffiles: /etc/cron.daily/man-db e467745743809f974051c3ec5b9cd022 /etc/cron.weekly/man-db 9527d2000fb1f221dbcecb75467a3e49 /etc/manpath.config 167675fd93075fb5f6ce1aa5f56a8a22 Description: on-line manual pager This package provides the man command, the primary way of examining the on-line help files (manual pages). Other utilities provided include the whatis and apropos commands for searching the manual page database, the manpath utility for determining the manual page search path, and the maintenance utilities mandb, catman and zsoelim. man-db uses the groff suite of programs to format and display the manual pages. Homepage: http://man-db.nongnu.org/ Package: shared-mime-info Status: install ok installed Priority: optional Section: misc Installed-Size: 4396 Maintainer: Sebastian Dröge Architecture: amd64 Multi-Arch: foreign Version: 1.3-1 Depends: libc6 (>= 2.14), libglib2.0-0 (>= 2.35.9), libxml2 (>= 2.7.4) Conflicts: libglib2.0-0 (<< 2.17.2), libgnomevfs2-0 (<< 1:2.24.0), tracker (<< 0.6.90) Description: FreeDesktop.org shared MIME database and spec This is the shared MIME-info database from the X Desktop Group. It is required by any program complying to the Shared MIME-Info Database spec, which is also included in this package. . At this time at least ROX, GNOME, KDE and XFCE use this database. Homepage: http://freedesktop.org/wiki/Software/shared-mime-info Package: libxkbcommon0 Status: install ok installed Priority: optional Section: libs Installed-Size: 302 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxkbcommon Version: 0.4.3-2 Depends: xkb-data, libc6 (>= 2.17) Pre-Depends: multiarch-support Description: library interface to the XKB compiler - shared library This package provides a library to handle keyboard descriptions, including loading them from disk, parsing them and handling their state. It's mainly meant for client toolkits, window systems, and other system applications; currently that includes Wayland, kmscon, GTK+, Clutter, and more. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libxkbcommon Homepage: http://www.xkbcommon.org/ Package: libnfnetlink0 Status: install ok installed Priority: extra Section: libs Installed-Size: 61 Maintainer: Alexander Wirt Architecture: amd64 Multi-Arch: same Source: libnfnetlink Version: 1.0.1-3 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Netfilter netlink library libnfnetlink is the low-level library for netfilter related kernel/userspace communication. It provides a generic messaging infrastructure for in-kernel netfilter subsystems (such as nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their respective users and/or management tools in userspace. Package: libavahi-client3 Status: install ok installed Priority: optional Section: libs Installed-Size: 136 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.6.31-5 Depends: libavahi-common3 (>= 0.6.22), libc6 (>= 2.4), libdbus-1-3 (>= 1.1.1) Pre-Depends: multiarch-support Description: Avahi client library Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains the library for Avahi's C API which allows you to integrate mDNS/DNS-SD functionality into your application. Homepage: http://avahi.org/ Package: libpam-modules Status: install ok installed Priority: required Section: admin Installed-Size: 860 Maintainer: Steve Langasek Architecture: amd64 Multi-Arch: same Source: pam Version: 1.1.8-3.1+deb8u1 Replaces: libpam-umask, libpam0g-util Provides: libpam-mkhomedir, libpam-motd, libpam-umask Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.1+deb8u1) Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask Conffiles: /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89 /etc/security/namespace.init b46b23d64860d1557d2a8f44b231fd54 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192 Description: Pluggable Authentication Modules for PAM This package completes the set of modules for PAM. It includes the pam_unix.so module as well as some specialty modules. Homepage: http://pam.sourceforge.net/ Package: libmpc3 Status: install ok installed Priority: extra Section: libs Installed-Size: 128 Maintainer: Laurent Fousse Architecture: amd64 Multi-Arch: same Source: mpclib3 Version: 1.0.2-1 Depends: libc6 (>= 2.3), libgmp10, libmpfr4 (>= 3.1.2) Pre-Depends: multiarch-support Description: multiple precision complex floating-point library MPC is a portable library written in C for arbitrary precision arithmetic on complex numbers providing correct rounding. For the time being, it contains all arithmetic operations over complex numbers, the exponential and the logarithm functions, the trigonometric and hyperbolic functions. . Ultimately, it should implement a multiprecision equivalent of the ISO C99 standard. . It builds upon the GNU MP and the MPFR libraries. Homepage: http://www.multiprecision.org/mpc/ Package: insserv Status: install ok installed Priority: optional Section: misc Installed-Size: 183 Maintainer: Petter Reinholdtsen Architecture: amd64 Version: 1.14.0-5 Depends: libc6 (>= 2.7) Suggests: bootchart2 Breaks: sysv-rc (<< 2.87dsf-3) Conffiles: /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd /etc/insserv.conf b15785c0c4b022a3ba0edb78ba71297c Description: boot sequence organizer using LSB init.d script dependency information The insserv program is used by the standard SysV-based init system. It updates the order of symlinks in /etc/rc?.d/ based on dependencies specified by LSB headers in the init.d scripts themselves. . These declared relations between scripts make it possible to optimize the boot sequence for the currently installed set of packages, while detecting and rejecting dependency loops. . Using insserv incorrectly can result in an unbootable system. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: libstdc++6 Status: install ok installed Priority: important Section: libs Installed-Size: 1319 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-4.9 Version: 4.9.2-10 Replaces: libstdc++6-4.9-dbg (<< 4.9.0-3) Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.18), libgcc1 (>= 1:4.1.1) Pre-Depends: multiarch-support Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Conflicts: scim (<< 1.4.2-1) Description: GNU Standard C++ Library v3 This package contains an additional runtime library for C++ programs built with the GNU compiler. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Homepage: http://gcc.gnu.org/ Package: libkrb5-3 Status: install ok installed Priority: standard Section: libs Installed-Size: 972 Maintainer: Sam Hartman Architecture: amd64 Multi-Arch: same Source: krb5 Version: 1.12.1+dfsg-19+deb8u1 Depends: libc6 (>= 2.16), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.9+dfsg~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.12.1+dfsg-19+deb8u1) Pre-Depends: multiarch-support Recommends: krb5-locales Suggests: krb5-doc, krb5-user Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3) Conflicts: libkrb53 Description: MIT Kerberos runtime libraries Kerberos is a system for authenticating users and services on a network. Kerberos is a trusted third-party service. That means that there is a third party (the Kerberos server) that is trusted by all the entities on the network (users and services, usually called "principals"). . This is the MIT reference implementation of Kerberos V5. . This package contains the runtime library for the main Kerberos v5 API used by applications and Kerberos clients. Homepage: http://web.mit.edu/kerberos/ Package: gcc-4.9-base Status: install ok installed Priority: required Section: libs Installed-Size: 218 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-4.9 Version: 4.9.2-10 Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~) Description: GCC, the GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Homepage: http://gcc.gnu.org/ Package: libffi6 Status: install ok installed Priority: optional Section: libs Installed-Size: 71 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: libffi (3.1-2) Version: 3.1-2+b2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Foreign Function Interface library runtime A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language. Package: libaudit-common Status: install ok installed Priority: optional Section: libs Installed-Size: 49 Maintainer: Laurent Bigonville Architecture: all Multi-Arch: foreign Source: audit Version: 1:2.4-1 Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2) Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2) Conffiles: /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2 Description: Dynamic library for security auditing - common files The audit-libs package contains the dynamic libraries needed for applications to use the audit framework. It is used to monitor systems for security related events. . This package contains the libaudit.conf configuration file and the associated manpage. Homepage: http://people.redhat.com/sgrubb/audit/ Package: libtext-charwidth-perl Status: install ok installed Priority: required Section: perl Installed-Size: 85 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Source: libtext-charwidth-perl (0.04-7) Version: 0.04-7+b3 Depends: libc6 (>= 2.2.5), perl-base (>= 5.20.0-4), perlapi-5.20.0 Description: get display widths of characters on the terminal This module permits perl software to get the display widths of characters and strings on the terminal, using wcwidth() and wcswidth() from libc. . It provides mbwidth(), mbswidth(), and mblen(). Homepage: http://search.cpan.org/search?module=Text::CharWidth Package: libavahi-common3 Status: install ok installed Priority: optional Section: libs Installed-Size: 121 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.6.31-5 Depends: libc6 (>= 2.14), libavahi-common-data Pre-Depends: multiarch-support Description: Avahi common library Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains the Avahi common library, which is a set of common functions used by many of Avahis components and client applications. Homepage: http://avahi.org/ Package: libdrm-radeon1 Status: install ok installed Priority: optional Section: libs Installed-Size: 107 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libdrm Version: 2.4.58-2 Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.38) Pre-Depends: multiarch-support Description: Userspace interface to radeon-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Package: xfonts-scalable Status: install ok installed Priority: optional Section: fonts Installed-Size: 532 Maintainer: Debian X Strike Force Architecture: all Version: 1:1.0.3-1 Depends: xfonts-utils Suggests: xfs | xserver Conflicts: xfntscl Conffiles: /etc/X11/fonts/Type1/xfonts-scalable.scale b579d5c7759383647c486da590d60815 Description: scalable fonts for X xfonts-scalable provides fonts that can be drawn at any size by the X server or font server without loss of quality. In most cases it is desirable to have the X font server (xfs) and/or an X server installed to make the fonts available to X clients. . This package is missing three fonts from the X.Org source archives because the license terms on the fonts do not meet the Debian Free Software Guidelines; they are the Type1 fonts Adobe Utopia, IBM Courier, and Bigelow & Holmes (B&H) Luxi. . This package requires the xutils package to prepare the font directories for use by an X server or X font server. Package: libcomerr2 Status: install ok installed Priority: required Section: libs Installed-Size: 101 Maintainer: Theodore Y. Ts'o Architecture: amd64 Multi-Arch: same Source: e2fsprogs Version: 1.42.12-1.1 Replaces: e2fsprogs (<< 1.34-1) Provides: libcomerr-kth-compat Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Description: common error description library libcomerr is an attempt to present a common error-handling mechanism to manipulate the most common form of error code in a fashion that does not have the problems identified with mechanisms commonly in use. Homepage: http://e2fsprogs.sourceforge.net Package: libthai-data Status: install ok installed Priority: optional Section: libs Installed-Size: 610 Maintainer: Theppitak Karoonboonyanan Architecture: all Multi-Arch: foreign Source: libthai Version: 0.1.21-1 Breaks: libthai0 (<< 0.1.10) Description: Data files for Thai language support library LibThai is a set of Thai language support routines aimed to ease developers' tasks to incorporate Thai language support in their applications. It includes important Thai-specific functions e.g. word breaking, input and output methods as well as basic character and string supports. . This package contains data files needed by the LibThai library. Homepage: http://linux.thai.net/projects/libthai Package: findutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 1406 Maintainer: Andreas Metzler Architecture: amd64 Multi-Arch: foreign Source: findutils (4.4.2-9) Version: 4.4.2-9+b1 Pre-Depends: libc6 (>= 2.17) Suggests: mlocate | locate Description: utilities for finding files--find, xargs GNU findutils provides utilities to find files meeting specified criteria and perform various actions on the files which are found. This package contains 'find' and 'xargs'; however, 'locate' has been split off into a separate package. Homepage: http://savannah.gnu.org/projects/findutils/ Package: libpam0g Status: install ok installed Priority: required Section: libs Installed-Size: 252 Maintainer: Steve Langasek Architecture: amd64 Multi-Arch: same Source: pam Version: 1.1.8-3.1+deb8u1 Replaces: libpam0g-util Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0 Pre-Depends: multiarch-support Suggests: libpam-doc Description: Pluggable Authentication Modules library Contains the shared library for Linux-PAM, a library that enables the local system administrator to choose how applications authenticate users. In other words, without rewriting or recompiling a PAM-aware application, it is possible to switch between the authentication mechanism(s) it uses. One may entirely upgrade the local authentication system without touching the applications themselves. Homepage: http://pam.sourceforge.net/ Package: libxdmcp6 Status: install ok installed Priority: optional Section: libs Installed-Size: 38 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxdmcp (1:1.1.1-1) Version: 1:1.1.1-1+b1 Depends: libc6 (>= 2.2.5) Pre-Depends: multiarch-support Description: X11 Display Manager Control Protocol library This package provides the main interface to the X11 display manager control protocol library, which allows for remote logins to display managers. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXdmcp Package: libcap-ng0 Status: install ok installed Priority: optional Section: libs Installed-Size: 59 Maintainer: Pierre Chifflier Architecture: amd64 Multi-Arch: same Source: libcap-ng Version: 0.7.4-2 Depends: libc6 (>= 2.8) Pre-Depends: multiarch-support Description: An alternate POSIX capabilities library This library implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . The libcap-ng library is intended to make programming with POSIX capabilities much easier than the traditional libcap library. . This package contains header files and libraries for libcap-ng. Homepage: http://people.redhat.com/sgrubb/libcap-ng Package: dbus Status: install ok installed Priority: standard Section: admin Installed-Size: 882 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: foreign Version: 1.8.20-0+deb8u1 Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libcap-ng0, libdbus-1-3 (>= 1.7.6), libexpat1 (>= 2.0.1), libselinux1 (>= 2.0.65), libsystemd0, adduser, lsb-base (>= 3.2-14) Suggests: dbus-x11 Conffiles: /etc/dbus-1/session.conf b96c3a72dbcf8d8019f8d9b3b0c1b743 /etc/dbus-1/system.conf cc9caaf3b2f4a11f188bf81f0e59eabb /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015 /etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27 Description: simple interprocess messaging system (daemon and utilities) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . D-Bus supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-Bus also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. . It comes with several bindings, including GLib, Python, Qt and Java. . This package contains the D-Bus daemon and related utilities. . The client-side library can be found in the libdbus-1-3 package, as it is no longer contained in this package. Homepage: http://dbus.freedesktop.org/ Package: libmount1 Status: install ok installed Priority: required Section: libs Installed-Size: 357 Maintainer: Debian util-linux Maintainers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.25.2-6 Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 1.32) Pre-Depends: multiarch-support Description: device mounting library The device mounting library, used by mount and umount helpers. Package: libxxf86vm1 Status: install ok installed Priority: optional Section: libs Installed-Size: 35 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxxf86vm (1:1.1.3-1) Version: 1:1.1.3-1+b1 Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0), libxext6 Pre-Depends: multiarch-support Description: X11 XFree86 video mode extension library libXxf86vm provides an interface to the XFree86-VidModeExtension extension, which allows client applications to get and set video mode timings in extensive detail. It is used by the xvidtune program in particular. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXxf86vm Package: libvorbisenc2 Status: install ok installed Priority: optional Section: libs Installed-Size: 757 Maintainer: Debian Xiph.org Maintainers Architecture: amd64 Multi-Arch: same Source: libvorbis Version: 1.3.4-2 Depends: libc6 (>= 2.4), libogg0 (>= 1.0rc3), libvorbis0a (= 1.3.4-2) Pre-Depends: multiarch-support Description: encoder library for Vorbis General Audio Compression Codec Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates from 16 to 128 kbps/channel. . The Vorbisenc library provides a convenient API for setting up an encoding environment using libvorbis. Homepage: http://www.xiph.org/vorbis/ Package: libkeyutils1 Status: install ok installed Priority: standard Section: libs Installed-Size: 55 Maintainer: Christian Kastner Architecture: amd64 Multi-Arch: same Source: keyutils (1.5.9-5) Version: 1.5.9-5+b1 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Linux Key Management Utilities (library) Keyutils is a set of utilities for managing the key retention facility in the kernel, which can be used by filesystems, block devices and more to gain and retain the authorization and encryption keys required to perform secure operations. . This package provides a wrapper library for the key management facility system calls. Homepage: http://people.redhat.com/~dhowells/keyutils/ Package: libdrm-nouveau2 Status: install ok installed Priority: optional Section: libs Installed-Size: 91 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libdrm Version: 2.4.58-2 Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.38) Pre-Depends: multiarch-support Description: Userspace interface to nouveau-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Package: libnewt0.52 Status: install ok installed Priority: important Section: libs Installed-Size: 171 Maintainer: Alastair McKinstry Architecture: amd64 Multi-Arch: same Source: newt (0.52.17-1) Version: 0.52.17-1+b1 Depends: libc6 (>= 2.15), libslang2 (>= 2.2.4) Pre-Depends: multiarch-support Recommends: libfribidi0 Conffiles: /etc/newt/palette.original d41d8cd98f00b204e9800998ecf8427e Description: Not Erik's Windowing Toolkit - text mode windowing with slang Newt is a windowing toolkit for text mode built from the slang library. It allows color text mode applications to easily use stackable windows, push buttons, check boxes, radio buttons, lists, entry fields, labels, and displayable text. Scrollbars are supported, and forms may be nested to provide extra functionality. This package contains the shared library for programs that have been built with newt. Homepage: https://fedorahosted.org/newt/ Package: bsdmainutils Status: install ok installed Priority: important Section: utils Installed-Size: 571 Maintainer: Debian Bsdmainutils Team Architecture: amd64 Multi-Arch: foreign Version: 9.0.6 Depends: libc6 (>= 2.14), libncurses5 (>= 5.5-5~), libtinfo5, bsdutils (>= 3.0-0), debianutils (>= 1.8) Suggests: cpp, wamerican | wordlist, whois, vacation Breaks: bsdutils (<< 1:2.13-11) Conffiles: /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96 /etc/cron.daily/bsdmainutils 559387f792462a62e3efb1d573e38d11 /etc/default/bsdmainutils bded239f4fea461cc5c92c3bd5a28cc9 Description: collection of more utilities from FreeBSD This package contains lots of small programs many people expect to find when they use a BSD-style Unix system. . It provides banner (as printerbanner), calendar, col, colcrt, colrm, column, from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and write (as bsd-write). . This package used to contain whois and vacation, which are now distributed in their own packages. Also here was tsort, which is now in the "coreutils" package. Package: libxft2 Status: install ok installed Priority: optional Section: libs Installed-Size: 141 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: xft Version: 2.3.2-1 Depends: libc6 (>= 2.14), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.3.5), libx11-6, libxrender1 Pre-Depends: multiarch-support Description: FreeType-based font drawing library for X Xft provides a client-side font API for X applications, making the FreeType font rasterizer available to X clients. Fontconfig is used for font specification resolution. Where available, the RENDER extension handles glyph drawing; otherwise, the core X protocol is used. Package: libcaca0 Status: install ok installed Priority: optional Section: libs Installed-Size: 1040 Maintainer: Sam Hocevar Architecture: amd64 Multi-Arch: same Source: libcaca Version: 0.99.beta19-2 Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libncursesw5 (>= 5.6+20070908), libslang2 (>= 2.2.4), libstdc++6 (>= 4.1.1), libtinfo5, zlib1g (>= 1:1.1.4) Pre-Depends: multiarch-support Description: colour ASCII art library libcaca is the Colour AsCii Art library. It provides high level functions for colour text drawing, simple primitives for line, polygon and ellipse drawing, as well as powerful image to text conversion routines. . This package contains the shared library for libcaca. Homepage: http://caca.zoy.org/wiki/libcaca Package: login Essential: yes Status: install ok installed Priority: required Section: admin Installed-Size: 2758 Maintainer: Shadow package maintainers Architecture: amd64 Source: shadow Version: 1:4.2-3+deb8u1 Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1) Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1) Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1) Conffiles: /etc/login.defs c8e7f89a2c5665cf75a760d4341ce2d2 /etc/pam.d/login 8cc9269fe679cb725d55925e95914499 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a /etc/securetty d9e5bf5e6bfa00ddd273a3bcf1a49bec Description: system login tools These tools are required to be able to login and use your system. The login program invokes your user shell and enables command execution. The newgrp program is used to change your effective group ID (useful for workgroup type situations). The su program allows changing your effective user ID (useful being able to execute commands as another user). Homepage: http://pkg-shadow.alioth.debian.org/ Package: net-tools Status: install ok installed Priority: important Section: net Installed-Size: 784 Maintainer: net-tools Team Architecture: amd64 Source: net-tools (1.60-26) Version: 1.60-26+b1 Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00) Depends: libc6 (>= 2.14) Conflicts: ja-trans (<= 0.8-2) Description: NET-3 networking toolkit This package includes the important tools for controlling the network subsystem of the Linux kernel. This includes arp, ifconfig, netstat, rarp, nameif and route. Additionally, this package contains utilities relating to particular network hardware types (plipconfig, slattach, mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr). . In the upstream package 'hostname' and friends are included. Those are not installed by this package, since there is a special "hostname*.deb". Homepage: http://net-tools.berlios.de/ Package: adduser Status: install ok installed Priority: important Section: admin Installed-Size: 1066 Maintainer: Debian Adduser Developers Architecture: all Multi-Arch: foreign Version: 3.113+nmu3 Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1) Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0 Suggests: liblocale-gettext-perl, perl-modules Conffiles: /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2 Description: add and remove users and groups This package includes the 'adduser' and 'deluser' commands for creating and removing users. . - 'adduser' creates new users and groups and adds existing users to existing groups; - 'deluser' removes users and groups and removes users from a given group. . Adding users with 'adduser' is much easier than adding them manually. Adduser will choose appropriate UID and GID values, create a home directory, copy skeletal user configuration, and automate setting initial values for the user's password, real name and so on. . Deluser can back up and remove users' home directories and mail spool or all the files they own on the system. . A custom script can be executed after each of the commands. . Development mailing list: http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/ Homepage: http://alioth.debian.org/projects/adduser/ Package: initscripts Status: install ok installed Priority: required Section: admin Installed-Size: 165 Maintainer: Debian sysvinit maintainers Architecture: amd64 Multi-Arch: foreign Source: sysvinit Version: 2.88dsf-59 Replaces: libc0.1, libc0.3, libc6, libc6.1 Depends: libc6 (>= 2.4), mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.88dsf-50), sysv-rc | file-rc, coreutils (>= 5.93) Recommends: psmisc, e2fsprogs Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.74), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), initramfs-tools (<< 0.104), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), util-linux (<< 2.20.1-5), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9) Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1) Conffiles: /etc/init.d/bootlogs 41ad826ad3091964c994b03177bbc29b /etc/init.d/bootmisc.sh 7e77260cb4071c21a99d581bfb8d2b74 /etc/init.d/checkfs.sh 8cd37d9296845ce642e5671198469c32 /etc/init.d/checkroot.sh 9c6f18f6f6b09ce96175bbbc5aaa8c99 /etc/init.d/checkroot-bootclean.sh 955dcf4da7378f9f981d3f04c94d36d7 /etc/init.d/halt a0e668699f774d928ddc62954155adb5 /etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d /etc/init.d/killprocs 9866a64a5d3d34552b0c36f5667cdacd /etc/init.d/motd dbc3f882af04254005bb96e4f780e5a0 /etc/init.d/mountall.sh 7dc50e51261550184c078955c01b5628 /etc/init.d/mountall-bootclean.sh 4c6b07a64798d8d78783e271238511f4 /etc/init.d/mountnfs.sh a33d7b1a4d5043ea997af1f44c600cb9 /etc/init.d/mountnfs-bootclean.sh 68aeda71fd9ae6861c3859c4ac33ee62 /etc/init.d/mountdevsubfs.sh c18f4495f67dec33e257946215f54508 /etc/init.d/mountkernfs.sh 12a99beb128e18bb6b277882233545af /etc/init.d/rc.local 7d505630f083ddc543cb68fbeb83a6b5 /etc/init.d/reboot 39ce57bc053ad1bf9861347927d7db6b /etc/init.d/rmnologin eb11c47dd70b51a6e0d927f50490965e /etc/init.d/sendsigs 617e0ce4756cd2ac0c53634c4667fe22 /etc/init.d/single bc7e38f0849ebfe767d162861fae002c /etc/init.d/umountfs 49f742a0f5af8124caba6c4264e78aa6 /etc/init.d/umountnfs.sh 5137d5524cdba56d07e61c1cd5bb7238 /etc/init.d/umountroot 57c8e9e95211ab355591dc8c211c8e8f /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a /etc/default/rcS a4af750cc5d1edc264d47dc01d11e1b8 /etc/default/tmpfs 9af2949a1c0373adfa0c7db2453eee62 /etc/network/if-up.d/mountnfs 528b2efd88285d2f443fcf54234b5156 Description: scripts for initializing and shutting down the system The scripts in this package initialize a standard Debian system at boot time and shut it down at halt or reboot time. Homepage: http://savannah.nongnu.org/projects/sysvinit Package: libvorbis0a Status: install ok installed Priority: optional Section: libs Installed-Size: 232 Maintainer: Debian Xiph.org Maintainers Architecture: amd64 Multi-Arch: same Source: libvorbis Version: 1.3.4-2 Depends: libc6 (>= 2.15), libogg0 (>= 1.1.0) Pre-Depends: multiarch-support Description: decoder library for Vorbis General Audio Compression Codec Ogg Vorbis is a fully open, non-proprietary, patent-and-royalty-free, general-purpose compressed audio format for audio and music at fixed and variable bitrates from 16 to 128 kbps/channel. . The Vorbis library is the primary Ogg Vorbis library. Homepage: http://www.xiph.org/vorbis/ Package: libnetfilter-acct1 Status: install ok installed Priority: extra Section: libs Installed-Size: 14 Maintainer: Laurence J. Lane Architecture: amd64 Multi-Arch: same Source: libnetfilter-acct Version: 1.0.2-1.1 Depends: libc6 (>= 2.4), libmnl0 (>= 1.0.3-4~) Pre-Depends: multiarch-support Description: Netfilter acct library libnetfilter_acct is a userspace library providing an interface to the extended netfilter accounting infrastructure. Homepage: http://www.netfilter.org/projects/libnetfilter_acct/ Package: x11-common Status: install ok installed Priority: optional Section: x11 Installed-Size: 466 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: xorg Version: 1:7.7+7 Depends: debconf (>= 0.5) | debconf-2.0, lsb-base (>= 1.3-9ubuntu2) Conffiles: /etc/X11/rgb.txt 09ee098b83d94c7c046d6b55ebe84ae1 /etc/X11/Xresources/x11-common b640adb1cd646ec097f8df5b6deca9f0 /etc/X11/Xsession.d/20x11-common_process-args b3365bc1fd7637dc237eda93533d0fe9 /etc/X11/Xsession.d/99x11-common_start 3874d5e8f3ec888f69adb126e223e168 /etc/X11/Xsession.d/35x11-common_xhost-local 3080616d080574d7b06c2b2a20af53dd /etc/X11/Xsession.d/40x11-common_xsessionrc db544c8543d1cb3762b9859288e77040 /etc/X11/Xsession.d/30x11-common_xresources 61cebe25ee0c64e981b88958dfee6f9c /etc/X11/Xsession.d/50x11-common_determine-startup b4570043736ae7f22947067b6d28ab8d /etc/X11/Xsession.d/90x11-common_ssh-agent ae74aadf705c5fccf841ef921b45ca72 /etc/X11/Xreset.d/README b344c222b5daf81926fd3270df374b5f /etc/X11/Xreset 05d188ccac2f3360af8fe0c216640233 /etc/X11/Xsession.options 210cd520efa87a5197cac01e10b3a84a /etc/X11/Xsession 8662d290adffe530016ebf825b9af06f /etc/init.d/x11-common aacceda738fb4e684ff00b5ac3fb6c0a Description: X Window System (X.Org) infrastructure x11-common contains the filesystem infrastructure required for further installation of the X Window System in any configuration; it does not provide a full installation of clients, servers, libraries, and utilities required to run the X Window System. . A number of terms are used to refer to the X Window System, including "X", "X Version 11", "X11", "X11R6", and "X11R7". The version of X used in Debian is derived from the version released by the X.Org Foundation, and is thus often also referred to as "X.Org". All of the preceding quoted terms are functionally interchangeable in an Debian system. Package: xdm Status: install ok installed Priority: optional Section: x11 Installed-Size: 725 Maintainer: Debian X Strike Force Architecture: amd64 Version: 1:1.1.11-1 Provides: x-display-manager Depends: libc6 (>= 2.11), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libx11-6, libxau6, libxaw7, libxdmcp6, libxext6, libxft2 (>> 2.1.1), libxinerama1, libxmu6, libxpm4, libxrender1, libxt6, debconf (>= 1.2.9) | debconf-2.0, x11-utils | xbase-clients | xmessage, cpp, lsb-base (>= 3.2-14), x11-xserver-utils, procps Conffiles: /etc/pam.d/xdm 830653ab50611df8aebd6bdd9bc4d64b /etc/X11/xdm/xdm.options 9c013a17289fff7a2f2d638e0aaddfa4 /etc/X11/xdm/Xreset 3b3504ceda0586aa253481771c32f066 /etc/X11/xdm/xdm-config 14de5c0e46f063c7470826a51af57dd2 /etc/X11/xdm/Xsetup d7ae4aa8ac7104183324ee8a537d9598 /etc/X11/xdm/Xresources 164484bb191896839da99f666b11bf59 /etc/X11/xdm/Xsession 15866358329a2c7fb4597f988e6bd61e /etc/X11/xdm/Xaccess 2464abb93d898af368a315eee3978b3d /etc/X11/xdm/Xservers d437d5632080bbb55911bbc2e0e0f47f /etc/X11/xdm/Xwilling 54e5cab60ba03032fbece1c9cdac4fc1 /etc/X11/xdm/Xstartup a4c8ae74bf9ae4656691e45937568282 /etc/X11/app-defaults/Chooser 7d69169e9ef2aa5c7ce9826953cfbca5 /etc/logrotate.d/xdm 981790902fe236e24798e6f642b88fdc /etc/init.d/xdm 1bf096f512c3bd3e7904a5d5ab81a92a /etc/insserv.conf.d/xdm 5b76e5488d12eed089d5de7e101acefa Description: X display manager xdm manages a collection of X servers, which may be on the local host or remote machines. It provides services similar to those provided by init, getty, and login on character-based terminals: prompting for login name and password, authenticating the user, and running a session. xdm supports XDMCP (X Display Manager Control Protocol) and can also be used to run a chooser process which presents the user with a menu of possible hosts that offer XDMCP display management. Package: libacl1 Status: install ok installed Priority: required Section: libs Installed-Size: 80 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: same Source: acl Version: 2.2.52-2 Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14) Pre-Depends: multiarch-support Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth Description: Access control list shared library This package contains the libacl.so dynamic library containing the POSIX 1003.1e draft standard 17 functions for manipulating access control lists. Homepage: http://savannah.nongnu.org/projects/acl/ Package: ncurses-bin Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 535 Maintainer: Craig Small Architecture: amd64 Multi-Arch: foreign Source: ncurses (5.9+20140913-1) Version: 5.9+20140913-1+b1 Pre-Depends: libc6 (>= 2.14), libtinfo5 (>= 5.9+20130119) Description: terminal-related programs and man pages The ncurses library routines are a terminal-independent method of updating character screens with reasonable optimization. . This package contains the programs used for manipulating the terminfo database and individual terminfo entries, as well as some programs for resetting terminals and such. Homepage: http://invisible-island.net/ncurses/ Package: acl Status: install ok installed Priority: optional Section: utils Installed-Size: 258 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: foreign Version: 2.2.52-2 Depends: libacl1 (= 2.2.52-2), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14) Description: Access control list utilities This package contains the getfacl and setfacl utilities needed for manipulating access control lists. Homepage: http://savannah.nongnu.org/projects/acl/ Package: libslang2 Status: install ok installed Priority: important Section: libs Installed-Size: 1543 Maintainer: Alastair McKinstry Architecture: amd64 Multi-Arch: same Source: slang2 Version: 2.3.0-2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Recommends: libpng12-0 Description: S-Lang programming library - runtime version S-Lang is a C programmer's library that includes routines for the rapid development of sophisticated, user friendly, multi-platform applications. . This package contains only the shared library libslang.so.* and copyright information. It is only necessary for programs that use this library (such as jed and slrn). If you plan on doing development with S-Lang, you will need the companion -dev package as well. Built-Using: unicode-data (= 7.0-2) Homepage: http://www.jedsoft.org/slang/ Package: xserver-xorg-video-mach64 Status: install ok installed Priority: optional Section: x11 Installed-Size: 303 Maintainer: Debian X Strike Force Architecture: amd64 Version: 6.9.4-2 Provides: xorg-driver-video Depends: libc6 (>= 2.14), xorg-video-abi-18, xserver-xorg-core (>= 2:1.15.99.903) Description: X.Org X server -- ATI Mach64 display driver This driver for the X.Org X server (see xserver-xorg for a further description) provides support for the ATI Mach64 series. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-mach64 driver module. Package: cron Status: install ok installed Priority: important Section: admin Installed-Size: 194 Maintainer: Javier Fernández-Sanguino Peña Architecture: amd64 Version: 3.0pl1-127+deb8u1 Provides: cron-daemon Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), init-system-helpers (>= 1.18~), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11) Pre-Depends: dpkg (>= 1.15.7.2) Recommends: exim4 | postfix | mail-transport-agent Suggests: anacron (>= 2.0-1), logrotate, checksecurity Breaks: dpkg (<< 1.15.4) Conffiles: /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2 /etc/crontab 8f111d100ea459f68d333d63a8ef2205 /etc/default/cron eae0d979b5007d2af41540d8c2631359 /etc/init.d/cron 85d7a3783889ea93dcda2fb488420c1c /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0 Description: process scheduling daemon The cron daemon is a background process that runs particular programs at particular times (for example, every minute, day, week, or month), as specified in a crontab. By default, users may also create crontabs of their own so that processes are run on their behalf. . Output from the commands is usually mailed to the system administrator (or to the user in question); you should probably install a mail system as well so that you can receive these messages. . This cron package does not provide any system maintenance tasks. Basic periodic maintenance tasks are provided by other packages, such as checksecurity. Homepage: http://ftp.isc.org/isc/cron/ Package: libmnl0 Status: install ok installed Priority: extra Section: libs Installed-Size: 60 Maintainer: Anibal Monsalve Salazar Architecture: amd64 Multi-Arch: same Source: libmnl Version: 1.0.3-5 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: minimalistic Netlink communication library libmnl is a minimalistic user-space library oriented to Netlink developers. There are a lot of common tasks in parsing, validating, constructing of both the Netlink header and TLVs that are repetitive and easy to get wrong. This library aims to provide simple helpers that allows you to re-use code and to avoid re-inventing the wheel. . The main features of this library are: . Small: the shared library requires around 30KB for an x86-based computer. . Simple: this library avoids complexity and elaborated abstractions that tend to hide Netlink details. . Easy to use: the library simplifies the work for Netlink-wise developers. It provides functions to make socket handling, message building, validating, parsing and sequence tracking, easier. . Easy to re-use: you can use the library to build your own abstraction layer on top of this library. . Decoupling: the interdependency of the main bricks that compose the library is reduced, i.e. the library provides many helpers, but the programmer is not forced to use them. . This package contains the shared libraries needed to run programs that use the minimalistic Netlink communication library. Homepage: http://netfilter.org/projects/libmnl/ Package: libapt-pkg4.12 Status: install ok installed Priority: important Section: libs Installed-Size: 2660 Maintainer: APT Development Team Architecture: amd64 Multi-Arch: same Source: apt Version: 1.0.9.8.2 Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:4.1.1), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 4.9), zlib1g (>= 1:1.2.2.3) Pre-Depends: multiarch-support Breaks: apt (<< 0.9.4~), libapt-inst1.5 (<< 0.9.9~) Description: package management runtime library This library provides the common functionality for searching and managing packages as well as information about packages. Higher-level package managers can depend upon this library. . This includes: * retrieval of information about packages from multiple sources * retrieval of packages and all dependent packages needed to satisfy a request either through an internal solver or by interfacing with an external one * authenticating the sources and validating the retrieved data * installation and removal of packages in the system * providing different transports to retrieve data over cdrom, ftp, http, rsh as well as an interface to add more transports like https (apt-transport-https) and debtorrent (apt-transport-debtorrent). Package: libxcb1 Status: install ok installed Priority: optional Section: libs Installed-Size: 161 Maintainer: XCB Developers Architecture: amd64 Multi-Arch: same Source: libxcb (1.10-3) Version: 1.10-3+b1 Depends: libc6 (>= 2.14), libxau6, libxdmcp6 Pre-Depends: multiarch-support Breaks: alsa-utils (<< 1.0.24.2-5), libxcb-xlib0 Description: X C Binding This package contains the library files needed to run software using libxcb, the X C Binding. . The XCB library provides an interface to the X Window System protocol, designed to replace the Xlib interface. XCB provides several advantages over Xlib: . * Size: small library and lower memory footprint * Latency hiding: batch several requests and wait for the replies later * Direct protocol access: one-to-one mapping between interface and protocol * Thread support: access XCB from multiple threads, with no explicit locking * Easy creation of new extensions: automatically generates interface from machine-parsable protocol descriptions Homepage: http://xcb.freedesktop.org Package: libusb-0.1-4 Status: install ok installed Priority: important Section: libs Installed-Size: 42 Maintainer: Aurelien Jarno Architecture: amd64 Multi-Arch: same Source: libusb Version: 2:0.1.12-25 Replaces: libusb-dev (<< 2:0.1.12-25) Depends: libc6 (>= 2.15) Pre-Depends: multiarch-support Description: userspace USB programming library Library for programming USB applications without the knowledge of Linux kernel internals. Homepage: http://www.linux-usb.org/ Package: libwayland-cursor0 Status: install ok installed Priority: optional Section: libs Installed-Size: 67 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: wayland Version: 1.6.0-2 Replaces: libwayland0 (<< 1.1.0-1) Depends: libc6 (>= 2.14), libwayland-client0 (>= 1.3.92) Pre-Depends: multiarch-support Conflicts: libwayland0 (<< 1.1.0-1) Description: wayland compositor infrastructure - cursor library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships a helper library to manage cursors. Homepage: http://wayland.freedesktop.org/ Package: traceroute Status: install ok installed Priority: important Section: net Installed-Size: 127 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Source: traceroute (1:2.0.20-2) Version: 1:2.0.20-2+b1 Depends: libc6 (>= 2.14) Description: Traces the route taken by packets over an IPv4/IPv6 network The traceroute utility displays the route used by IP packets on their way to a specified network (or Internet) host. Traceroute displays the IP number and host name (if possible) of the machines along the route taken by the packets. Traceroute is used as a network debugging tool. If you're having network connectivity problems, traceroute will show you where the trouble is coming from along the route. . Install traceroute if you need a tool for diagnosing network connectivity problems. Homepage: http://traceroute.sourceforge.net/ Package: libllvm3.5 Status: install ok installed Priority: optional Section: libs Installed-Size: 29817 Maintainer: LLVM Packaging Team Architecture: amd64 Multi-Arch: same Source: llvm-toolchain-3.5 Version: 1:3.5-10 Depends: libc6 (>= 2.15), libedit2 (>= 2.11-20080614), libffi6 (>= 3.0.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9), libtinfo5, zlib1g (>= 1:1.2.0) Pre-Depends: multiarch-support Description: Modular compiler and toolchain technologies, runtime library LLVM is a collection of libraries and tools that make it easy to build compilers, optimizers, just-in-time code generators, and many other compiler-related programs. . This package contains the LLVM runtime library. Homepage: http://www.llvm.org/ Package: logrotate Status: install ok installed Priority: important Section: admin Installed-Size: 91 Maintainer: Paul Martin Architecture: amd64 Source: logrotate (3.8.7-1) Version: 3.8.7-1+b1 Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.14), libpopt0 (>= 1.14), libselinux1 (>= 1.32), cron | anacron | cron-daemon, base-passwd (>= 2.0.3.4) Recommends: mailx Breaks: postgresql-common (<= 126) Conffiles: /etc/cron.daily/logrotate d2281ecb6f898b446ac8a5984ab5a243 /etc/logrotate.conf 176edd439a499501372cf3d04e795810 Description: Log rotation utility The logrotate utility is designed to simplify the administration of log files on a system which generates a lot of log files. Logrotate allows for the automatic rotation compression, removal and mailing of log files. Logrotate can be set to handle a log file daily, weekly, monthly or when the log file gets to a certain size. Normally, logrotate runs as a daily cron job. Homepage: https://fedorahosted.org/logrotate/ Package: libopenvg1-mesa Status: install ok installed Priority: optional Section: libs Installed-Size: 122 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 10.3.2-1+deb8u1 Replaces: libopenvg1 Provides: libopenvg1 Depends: libc6 (>= 2.3.4) Pre-Depends: multiarch-support Conflicts: libopenvg1 Description: free implementation of the OpenVG API -- runtime This package contains the mesa implementation of the OpenVG 2D acceleration library. OpenVG provides a device independent and vendor-neutral interface for sophisticated 2D graphical applications, while allowing device manufacturers to provide hardware acceleration on devices ranging from wrist watches to full microprocessor-based desktop and server machines. Homepage: http://mesa3d.sourceforge.net/ Package: libsepol1 Status: install ok installed Priority: required Section: libs Installed-Size: 339 Maintainer: Debian SELinux maintainers Architecture: amd64 Multi-Arch: same Source: libsepol Version: 2.3-2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: SELinux library for manipulating binary security policies Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement®, Role-based Access Control, and Multi-level Security. . libsepol provides an API for the manipulation of SELinux binary policies. It is used by checkpolicy (the policy compiler) and similar tools, as well as by programs like load_policy that need to perform specific transformations on binary policies such as customizing policy boolean settings. Homepage: http://userspace.selinuxproject.org/ Package: libx11-data Status: install ok installed Priority: optional Section: x11 Installed-Size: 1582 Maintainer: Debian X Strike Force Architecture: all Multi-Arch: foreign Source: libx11 Version: 2:1.6.2-3 Breaks: libx11-6 (<< 2:1.4.1) Description: X11 client-side library This package provides the locale data files for libx11. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libX11 Package: libxau6 Status: install ok installed Priority: optional Section: libs Installed-Size: 61 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxau Version: 1:1.0.8-1 Depends: libc6 (>= 2.4) Pre-Depends: multiarch-support Description: X11 authorisation library This package provides the main interface to the X11 authorisation handling, which controls authorisation for X connections, both client-side and server-side. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXau Package: libidn11 Status: install ok installed Priority: standard Section: libs Installed-Size: 318 Maintainer: Debian Libidn Team Architecture: amd64 Multi-Arch: same Source: libidn (1.29-1) Version: 1.29-1+b2 Replaces: libidn11-dev Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Conflicts: libidn9-dev Description: GNU Libidn library, implementation of IETF IDN specifications GNU Libidn is a fully documented implementation of the Stringprep, Punycode and IDNA specifications. Libidn's purpose is to encode and decode internationalized domain names. The Nameprep, XMPP, SASLprep, and iSCSI profiles are supported. . This package contains the shared library. Homepage: https://www.gnu.org/software/libidn/ Package: rsyslog Status: install ok installed Priority: important Section: admin Installed-Size: 1834 Maintainer: Michael Biebl Architecture: amd64 Version: 8.4.2-1+deb8u2 Provides: linux-kernel-log-daemon, system-log-daemon Depends: libc6 (>= 2.17), libestr0 (>= 0.1.4), libjson-c2 (>= 0.10), liblogging-stdlog0 (>= 1.0.2), liblognorm1 (>= 0.3.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4), init-system-helpers (>= 1.18~), lsb-base (>= 3.2-14), initscripts (>= 2.88dsf-13.3) Recommends: logrotate Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-mongodb, rsyslog-doc, rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp Conflicts: linux-kernel-log-daemon, system-log-daemon Conffiles: /etc/default/rsyslog c7af23c348917e877399baea1849727a /etc/init.d/rsyslog a1ef1bb01ba370040d705c92fc09e92e /etc/logcheck/ignore.d.server/rsyslog 650507df599fbbdd6cb4142bd77fd2ff /etc/logrotate.d/rsyslog b995d89ccfe4a83ac3ffc5ab95b80f7b /etc/rsyslog.conf 169baf73fd49d20d142d088e663a9a63 Description: reliable system and kernel logging daemon Rsyslog is a multi-threaded implementation of syslogd (a system utility providing support for message logging), with features that include: * reliable syslog over TCP, SSL/TLS and RELP * on-demand disk buffering * email alerting * writing to MySQL or PostgreSQL databases (via separate output plugins) * permitted sender lists * filtering on any part of the syslog message * on-the-wire message compression * fine-grained output format control * failover to backup destinations * enterprise-class encrypted syslog relaying . It is the default syslogd on Debian systems. Homepage: http://www.rsyslog.com/ Package: libxrandr2 Status: install ok installed Priority: optional Section: libs Installed-Size: 64 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: libxrandr (2:1.4.2-1) Version: 2:1.4.2-1+b1 Depends: libc6 (>= 2.14), libx11-6 (>= 2:1.6.0), libxext6, libxrender1 Pre-Depends: multiarch-support Description: X11 RandR extension library libXrandr provides an X Window System client interface to the RandR extension to the X protocol. . The RandR extension allows for run-time configuration of display attributes such as resolution, rotation, and reflection. . More information about X.Org can be found at: . This module can be found at git://anongit.freedesktop.org/git/xorg/lib/libXrandr Package: libdbus-1-3 Status: install ok installed Priority: optional Section: libs Installed-Size: 368 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: dbus Version: 1.8.20-0+deb8u1 Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Recommends: dbus Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9) Description: simple interprocess messaging system (library) D-Bus is a message bus, used for sending messages between applications. Conceptually, it fits somewhere in between raw sockets and CORBA in terms of complexity. . D-Bus supports broadcast messages, asynchronous messages (thus decreasing latency), authentication, and more. It is designed to be low-overhead; messages are sent using a binary protocol, not using XML. D-Bus also supports a method call mapping for its messages, but it is not required; this makes using the system quite simple. . It comes with several bindings, including GLib, Python, Qt and Java. . The daemon can be found in the dbus package. Homepage: http://dbus.freedesktop.org/ Package: libgcc1 Status: install ok installed Priority: required Section: libs Installed-Size: 129 Maintainer: Debian GCC Maintainers Architecture: amd64 Multi-Arch: same Source: gcc-4.9 (4.9.2-10) Version: 1:4.9.2-10 Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.14) Pre-Depends: multiarch-support Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2) Description: GCC support library Shared version of the support library, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. Homepage: http://gcc.gnu.org/ Package: libreadline6 Status: install ok installed Priority: important Section: libs Installed-Size: 419 Maintainer: Matthias Klose Architecture: amd64 Multi-Arch: same Source: readline6 (6.3-8) Version: 6.3-8+b3 Depends: readline-common, libc6 (>= 2.15), libtinfo5 Pre-Depends: multiarch-support Description: GNU readline and history libraries, run-time libraries The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Package: xfonts-base Status: install ok installed Priority: optional Section: fonts Installed-Size: 8280 Maintainer: Debian X Strike Force Architecture: all Version: 1:1.0.3 Replaces: xfonts-misc Depends: xfonts-utils (>= 1:7.5+2) Suggests: xfs | xserver Conffiles: /etc/X11/fonts/misc/xfonts-base.alias a8ec05d528431d4c9703b55a7efd67a8 Description: standard fonts for X xfonts-base provides a standard set of low-resolution bitmapped fonts. In most cases it is desirable to have the X font server (xfs) and/or an X server installed to make the fonts available to X clients. Package: util-linux Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 2733 Maintainer: Debian util-linux Maintainers Architecture: amd64 Multi-Arch: foreign Version: 2.25.2-6 Replaces: bash-completion (<< 1:2.1-3) Depends: initscripts, lsb-base (>= 3.0-6), tzdata (>= 2006c-2) Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libmount1 (>= 2.25), libncurses5 (>= 5.5-5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libslang2 (>= 2.2.4), libsmartcols1 (>= 2.25), libtinfo5, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4) Suggests: dosfstools, kbd | console-tools, util-linux-locales Breaks: bash-completion (<< 1:2.1-3), grml-debootstrap (<< 0.68) Conffiles: /etc/default/hwclock 3916544450533eca69131f894db0ca12 /etc/init.d/hwclock.sh b5ca46c0c11ace2a1e40217c29646bf2 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45 Description: Miscellaneous system utilities This package contains a number of important utilities, most of which are oriented towards maintenance of your system. Some of the more important utilities included in this package allow you to partition your hard disk, view kernel messages, and create new filesystems. Package: libustr-1.0-1 Status: install ok installed Priority: optional Section: libs Installed-Size: 287 Maintainer: Vaclav Ovsik Architecture: amd64 Multi-Arch: same Source: ustr (1.0.4-3) Version: 1.0.4-3+b2 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: Micro string library: shared library ustr (Micro string library) is a string API for C. It has tiny overhead over just plain strdup(), is much safer, is easier to use, is faster for many operations, can be used with read-only or automatically allocated data. You don't even need to link to the library to use it (so there are no dependencies). . This package contains the shared library for ustr. Homepage: http://www.and.org/ustr/ Package: fontconfig Status: install ok installed Priority: optional Section: fonts Installed-Size: 547 Maintainer: Keith Packard Architecture: amd64 Multi-Arch: foreign Version: 2.11.0-6.3 Replaces: fontconfig-config (<< 2.5.93-1) Depends: libc6 (>= 2.4), libfontconfig1 (>= 2.11), libfreetype6 (>= 2.2.1), fontconfig-config Pre-Depends: dpkg (>= 1.16.1) Description: generic font configuration library - support binaries Fontconfig is a font configuration and customization library, which does not depend on the X Window System. It is designed to locate fonts within the system and select them according to requirements specified by applications. . Fontconfig is not a rasterization library, nor does it impose a particular rasterization library on the application. The X-specific library 'Xft' uses fontconfig along with freetype to specify and rasterize fonts. . This package contains a program to maintain the fontconfig cache (fc-cache), a sample program to list installed fonts (fc-list), a program to test the matching rules (fc-match) and a program to dump the binary cache files in string form (fc-cat). It no longer makes fonts managed by defoma available to fontconfig applications. Package: tasksel Status: install ok installed Priority: important Section: admin Installed-Size: 718 Maintainer: Debian Install System Team Architecture: all Version: 3.31+deb8u1 Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, apt, tasksel-data, perl-base (>= 5.14.0-1) Pre-Depends: debconf (>= 1.5.34) | cdebconf (>= 0.106) Conflicts: base-config (<< 2.32), debconf (<< 1.4.27) Description: tool for selecting tasks for installation on Debian systems This package provides 'tasksel', a simple interface for users who want to configure their system to perform a specific task. Package: libjson-c2 Status: install ok installed Priority: extra Section: libs Installed-Size: 88 Maintainer: fabien boucher Architecture: amd64 Multi-Arch: same Source: json-c Version: 0.11-4 Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Description: JSON manipulation library - shared library This library allows you to easily construct JSON objects in C, output them as JSON formatted strings and parse JSON formatted strings back into the C representation of JSON objects. Homepage: https://github.com/json-c/json-c/wiki Package: libwrap0 Status: install ok installed Priority: standard Section: libs Installed-Size: 86 Maintainer: Marco d'Itri Architecture: amd64 Multi-Arch: same Source: tcp-wrappers Version: 7.6.q-25 Replaces: tcpd (<< 7.6.q-20) Depends: libc6 (>= 2.14) Pre-Depends: multiarch-support Recommends: tcpd Breaks: tcpd (<< 7.6.q-20) Description: Wietse Venema's TCP wrappers library Wietse Venema's network logger, also known as TCPD or LOG_TCP. . These programs log the client host name of incoming telnet, ftp, rsh, rlogin, finger etc. requests. . Security options are: - access control per host, domain and/or service; - detection of host name spoofing or host address spoofing; - booby traps to implement an early-warning system. Package: libavahi-common-data Status: install ok installed Priority: optional Section: libs Installed-Size: 794 Maintainer: Utopia Maintenance Team Architecture: amd64 Multi-Arch: same Source: avahi Version: 0.6.31-5 Description: Avahi common data files Avahi is a fully LGPL framework for Multicast DNS Service Discovery. It allows programs to publish and discover services and hosts running on a local network with no specific configuration. For example you can plug into a network and instantly find printers to print to, files to look at and people to talk to. . This package contains common data files for avahi. Homepage: http://avahi.org/ Package: xinput Status: install ok installed Priority: optional Section: x11 Installed-Size: 114 Maintainer: Debian X Strike Force Architecture: amd64 Version: 1.6.1-1 Depends: libc6 (>= 2.7), libx11-6 (>= 2:1.2.99.901), libxext6, libxi6 (>= 2:1.2.99.4), libxinerama1, libxrandr2 (>= 2:1.2.0) Description: Runtime configuration and test of XInput devices Xinput is an utility for configuring and testing XInput devices. Package: libicu52 Status: install ok installed Priority: optional Section: libs Installed-Size: 27328 Maintainer: Laszlo Boszormenyi (GCS) Architecture: amd64 Multi-Arch: same Source: icu Version: 52.1-8+deb8u3 Depends: libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9) Pre-Depends: multiarch-support Description: International Components for Unicode ICU is a C++ and C library that provides robust and full-featured Unicode and locale support. This package contains the runtime libraries for ICU. Homepage: http://www.icu-project.org Package: sed Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 921 Maintainer: Clint Adams Architecture: amd64 Source: sed (4.2.2-4) Version: 4.2.2-4+b1 Depends: dpkg (>= 1.15.4) | install-info Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32) Description: The GNU sed stream editor sed reads the specified files or the standard input if no files are specified, makes editing changes according to a list of commands, and writes the results to the standard output. Homepage: http://www.gnu.org/software/sed/ Package: libcups2 Status: install ok installed Priority: optional Section: libs Installed-Size: 636 Maintainer: Debian Printing Team Architecture: amd64 Multi-Arch: same Source: cups Version: 1.7.5-11+deb8u1 Depends: libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libc6 (>= 2.14), libgnutls-deb0-28 (>= 3.3.0), libgssapi-krb5-2 (>= 1.10+dfsg~), zlib1g (>= 1:1.2.0) Pre-Depends: multiarch-support Suggests: cups-common Breaks: cups (<< 1.5.0) Description: Common UNIX Printing System(tm) - Core library The Common UNIX Printing System (or CUPS(tm)) is a printing system and general replacement for lpd and the like. It supports the Internet Printing Protocol (IPP), and has its own filtering driver model for handling various document types. . This package provides the base shared libraries for CUPS. Homepage: http://www.cups.org Package: libsmartcols1 Status: install ok installed Priority: required Section: libs Installed-Size: 209 Maintainer: Debian util-linux Maintainers Architecture: amd64 Multi-Arch: same Source: util-linux Version: 2.25.2-6 Depends: libc6 (>= 2.17) Pre-Depends: multiarch-support Description: smart column output alignment library The smart column output alignment library, used by fdisk utilities. Package: libcryptsetup4 Status: install ok installed Priority: optional Section: libs Installed-Size: 227 Maintainer: Debian Cryptsetup Team Architecture: amd64 Multi-Arch: same Source: cryptsetup Version: 2:1.6.6-5 Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.90), libgcrypt20 (>= 1.6.1), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1) Description: disk encryption support - shared library Cryptsetup provides an interface for configuring encryption on block devices (such as /home or swap partitions), using the Linux kernel device mapper target dm-crypt. It features integrated Linux Unified Key Setup (LUKS) support. . This package provides the libcryptsetup shared library. Homepage: http://code.google.com/p/cryptsetup/ Package: libegl1-mesa Status: install ok installed Priority: optional Section: libs Installed-Size: 262 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: mesa Version: 10.3.2-1+deb8u1 Replaces: libegl1-x11 Provides: libegl1-x11 Depends: libc6 (>= 2.14), libdrm2 (>= 2.4.25), libexpat1 (>= 2.0.1), libgbm1 (>= 7.11~1), libwayland-client0 (>= 1.3.92), libwayland-server0 (>= 1.2.0), libx11-6, libx11-xcb1, libxcb-dri2-0 (>= 1.8), libxcb-render0, libxcb-shape0, libxcb-xfixes0, libxcb1, libudev1 Pre-Depends: multiarch-support Recommends: libegl1-mesa-drivers Conflicts: libegl1-x11 Description: free implementation of the EGL API -- runtime This package contains the EGL native platform graphics interface library. EGL provides a platform-agnostic mechanism for creating rendering surfaces for use with other graphics libraries, such as OpenGL|ES and OpenVG. . This package contains modules to interface with the existing system GLX or DRI2 drivers to provide OpenGL via EGL. The libegl1-mesa-drivers package provides drivers to provide hardware-accelerated OpenGL|ES and OpenVG support. Homepage: http://mesa3d.sourceforge.net/ Package: xserver-xorg-video-ati Status: install ok installed Priority: optional Section: x11 Installed-Size: 361 Maintainer: Debian X Strike Force Architecture: amd64 Version: 1:7.5.0-1 Provides: xorg-driver-video Depends: libc6 (>= 2.4), libpciaccess0, xorg-video-abi-18, xserver-xorg-core (>= 2:1.15.99.903), xserver-xorg-video-r128, xserver-xorg-video-mach64, xserver-xorg-video-radeon Description: X.Org X server -- AMD/ATI display driver wrapper This package provides the 'ati' driver for the AMD/ATI Mach64, Rage128, Radeon, FireGL, FireMV, FirePro and FireStream series. This driver is actually a wrapper that loads one of the 'mach64', 'r128' or 'radeon' sub-drivers depending on the hardware. These sub-drivers are brought through package dependencies. . Users of Rage, Mach, or Radeon boards may remove this package only if they use Driver "r128", "mach64", or "radeon" in /etc/X11/xorg.conf instead of relying on autodetection. . More information about X.Org can be found at: . This package is built from the X.org xf86-video-ati driver module. Package: libwayland-server0 Status: install ok installed Priority: optional Section: libs Installed-Size: 112 Maintainer: Debian X Strike Force Architecture: amd64 Multi-Arch: same Source: wayland Version: 1.6.0-2 Replaces: libwayland0 (<< 1.1.0-1) Depends: libc6 (>= 2.14), libffi6 (>= 3.0.4) Pre-Depends: multiarch-support Breaks: weston (<< 1.2.0) Conflicts: libwayland0 (<< 1.1.0-1) Description: wayland compositor infrastructure - server library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the server side of the Wayland protocol. Homepage: http://wayland.freedesktop.org/ Package: netbase Status: install ok installed Priority: important Section: admin Installed-Size: 66 Maintainer: Marco d'Itri Architecture: all Multi-Arch: foreign Version: 5.3 Depends: lsb-base (>= 3.0-6) Recommends: ifupdown Breaks: ifupdown (<< 0.7) Conffiles: /etc/rpc f0b6f6352bf886623adc04183120f83b /etc/protocols bb9c019d6524e913fd72441d58b68216 /etc/services 7d9960c77b363e2c2f41b77733cf57d4 Description: Basic TCP/IP networking system This package provides the necessary infrastructure for basic TCP/IP based networking.